Cantex
BernzOmatic
View:
Active Filters :
- Brand: BernzOmatic Cantex Lithonia
$
127.00
Qty:
$
17.29
Qty:
Part #:500924
- The Bernzomatic® 14.1 oz Propane Hand Torch Cylinder is a portable, convenient way to fuel your hand torch. Constructed of durable steel, the slim, lightweight cylinder is easy to grip and maneuver as you work. This product is compatible with our Digital Fuel Gauge to easily measure how much fuel is remaining in the cylinder. Propane fuel has an in-air flame temperature of 3,600 degrees Fahrenheit.
Uses
Small Diameter Soldering
Softening Putty and Paint
Qty:
Part #:505234
- TS4000T Advanced Performance Torch
The Bernzomatic® Advanced Performance Torch is built with instant on/off ignition, a swirl flame profile and flame lock option for continuous use. It is pressure regulated for consistent performance when inverted, making it ideal for large diameter soldering, light brazing, woodworking and cooking. The Advanced Performance Torch is compatible with 14.1 oz Bernzomatic MAP-Pro® fuel and 14.1 oz and 16 oz Bernzomatic Propane fuel, sold separately. Limited Lifetime Warranty.
Uses
Brazing
Cooking
Small to Large Diameter Soldering
Woodworking
Qty:
Part #:500125
- 14.1oz Map-Pro Hand Torch Cylinder
The Bernzomatic® 14.1 oz MAP-Pro® Hand Torch Cylinder enables you to complete tasks faster and more efficiently using a higher burn temperature than standard propane. MAP-Pro is premium fuel suited for a variety of job site projects including soldering large copper pipes, brazing and heat treating. The durable steel cylinder is the slim and lightweight for easy gripping and maneuvering. This product is compatible with our Digital Fuel Gauge to easily measure how much fuel is remaining in the cylinder. MAP-Pro fuel has an in-air flame temperature of 3,730 degrees Fahrenheit.
Qty:
Part #:302936
- The Quantum LHQM LED is the perfect choice with space at a premium. The combination of exit and emergency lighting also has self-diagnostic option available.
Suitable for applications requiring quick installation of both exit sign and unit equipment with a streamlined design for above-the-door applications and other tight fits.
The LHQM LED delivers 25' center-to-center spacing to meet the NFPA 101 Life Safety Code with fewer fixtures.
Impact- and scratch-resistant thermoplastic housing
Universal mounting top, end and back
Ni-cad battery
HO battery options allow use with up to six LED remote lamp heads
$
116.10
Qty:
Part #:306033
- The EU2C by Lithonia Lighting® is a certified Title 20 light suitable for emergency lighting applications such as stairways and hallways. It is not intended for ceiling mounting. The EU2C is designed with injection-molded, flame-retardant, high impact thermoplastic housing. The maintenance-free nickel-cadmium battery with test switch and status indicator provides 90-minutes of emergency power
$
27.44
Qty:
Part #:305755
- An attractive and slim thermoplastic exit sign from the Quantum family of emergency lighting products.
Ideal for applications requiring attractive, quick-installation exit signs and low energy consumption.
Innovative snap-together design allows installation in less than three minutes.
The typical life of the exit LED lamp is 10 years. Consumes less than one watt of energy.
Fully assembled single-face exit with extra faceplate for easy field conversion to double-face standard.
Replaceable chevron directional indicator knockouts for choice of direction.
Universal (top, end or back) mounting with canopy included.
Self-diagnostics option
STAR Self-Testing Automated Reporting option
$
57.38
Qty:
Part #:300016
- Description CANTEX 5133736 is a 1/2 in. Conduit Clamp / Strap which is a U-shaped conduit support used to anchor conduit to interior or exterior surfaces Features Two holes in the feet of the clamp allow mounting the screws or nails Durable non-conductive PVC will not rust or corrode For use with Schedule 40 & 80 conduit UL and CSA listed Made in USA Requires two #10 screws for installation (not included)
$
0.22
Qty:
Part #:301272
- CANTEX 6141625 is a 1 in. Schedule 40 Standard Center Stop Coupling used to join lengths of conduit pipe together with two solvent weld socket ends
Features
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Center stop to help determine proper depth of connection
For use aboveground and underground and non-conductive and sunlight resistant
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
0.21
Qty:
Part #:301354
- CANTEX 6141630 is a 3 in. Schedule 40 Standard Center Stop Coupling used to join lengths of conduit pipe together with two solvent weld socket ends
Features
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Center stop to help determine proper depth of connection
For use aboveground and underground and non-conductive and sunlight resistant
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
1.43
Qty:
Part #:301356
- CANTEX 6141632 is a 4 in. Schedule 40 Standard Center Stop Coupling used to join lengths of conduit pipe together with two solvent weld socket ends
Features
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Center stop to help determine proper depth of connection
For use aboveground and underground and non-conductive and sunlight resistant
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
2.20
Qty:
Part #:301402
- CANTEX 5140112 is a 4 in. Male Terminal Adapter which is a connector used to transition from a spigot end PVC conduit to a threaded metal or PVC plastic female bell end
Features
Durable non-conductive PVC will not rust or corrode
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
3.02
Qty:
Part #:301405
- CANTEX 5133828 is a 2 in. x 90-Degree Plain End Schedule 40 Standard Radius Elbow used to change the direction of a conduit run by 90-Degree
Features
Schedule 40 Nonmetallic PVC construction for strength and durability
For indoor or outdoor use
Suitable for aboveground or buried
Plain-end connections are solvent weld
ETL listed Conforms to UL 651 and NEMA TC-3 Conforms to UL 651 and NEMA TC-3
Made in USA
$
2.09
Qty:
Part #:301414
- CANTEX 5133832 is a 4 in. x 90-Degree Plain End Schedule 40 Standard Radius Elbow used to change the direction of a conduit run by 90-Degree
Features
Schedule 40 Nonmetallic PVC construction for strength and durability
For indoor or outdoor use
Suitable for aboveground or buried
Plain-end connections are solvent weld
ETL listed Conforms to UL 651 and NEMA TC-3 Conforms to UL 651 and NEMA TC-3
Made in USA
$
28.17
Qty:
Part #:301487
- CANTEX 5133821 is a 4 in. x 90-Degree x 36 in. Radius Plain End Schedule 40 Special Radius Elbow used to change the direction of a conduit run by 90-Degree
Features
Schedule 40 Nonmetallic PVC construction for strength and durability
For indoor or outdoor use
Suitable for aboveground or buried
Plain-end connections are solvent weld
ETL listed Conforms to UL 651 and NEMA TC-3 Conforms to UL 651 and NEMA TC-3
Made in USA
$
87.11
Qty:
Part #:301544
- CANTEX 6441001 is a 1/2 in. Enviro-Flex Straight Liquidtight Connector used to connect Enviro-Flex nonmetallic liquidtight flexible tubing to a box opening or threaded female fitting Features Use with Enviro-Flex Liquid Tight Conduit For use in wet or damp locations Durable non-conductive PVC will not rust or corrode Polypropylene sealing ring UL listed
$
2.45
Qty:
Part #:301770
- CANTEX 5133668 is a 2 in. Conduit Body Type LB which provides pull, splice, and tap access for conductors in a conduit system along with a change in direction Features Type LB Conduit Bodies are used to make a 90-degree turn in a conduit run with one opening on top and one opening exiting from the back opposite the cover Durable non-conductive PVC will not rust or corrode For use with Schedule 40 & 80 conduit Includes lid, gasket, and screws UL listed Made in USA
$
23.33
Qty:
Part #:303374
- CANTEX 5133410 is a 2-Gang Weatherproof Blank Cover designed for use with exposed weatherproof boxes
Features
Includes gasket and screws
For use in wet or damp locations
Durable non-conductive PVC will not rust or corrode
UL listed and UL Marine listed
Made in USA
$
5.50
Qty:
Part #:303756
- CANTEX 5133836 is a 2 in. x 90-Degree x 24 in. Radius Plain End Schedule 40 Special Radius Elbow used to change the direction of a conduit run by 90-Degree
Features
Schedule 40 Nonmetallic PVC construction for strength and durability
For indoor or outdoor use
Suitable for aboveground or buried
Plain-end connections are solvent weld
ETL listed Conforms to UL 651 and NEMA TC-3 Conforms to UL 651 and NEMA TC-3
Made in USA
$
22.99
Qty:
Part #:304347
- CANTEX 5133825 is a 1 in. x 90-Degree Plain End Schedule 40 Standard Radius Elbow used to change the direction of a conduit run by 90-Degree Features Schedule 40 Nonmetallic PVC construction for strength and durability For indoor or outdoor use Suitable for aboveground or buried Plain-end connections are solvent weld ETL listed Conforms to UL 651 and NEMA TC-3 Conforms to UL 651 and NEMA TC-3 Made in USA
$
1.56
Qty:
Part #:305525
- CANTEX 5133743 is a 2 in. Service Entrance Caps which is used as the entry point for overhead power and communication wires into a building
Features
Prevents precipitation from entering the conduit into the building
One 1/2 in. and two 3/4 in. knockouts for wire options
Material is Rigid PVC
UL Listed
Made in USA
$
20.90
Qty:
Part #:305527
- CANTEX 5133735 is a 2 in. Conduit Clamp / Strap which is a U-shaped conduit support used to anchor conduit to interior or exterior surfaces Features Two holes in the feet of the clamp allow mounting the screws or nails Durable non-conductive PVC will not rust or corrode For use with Schedule 40 & 80 conduit UL and CSA listed Made in USA Requires two #10 screws for installation (not included)
$
0.52
Qty:
Displaying: 1 - 24 of 101 Matching Items