Best Welds
A.Y. Mcdonald Water Works
View:
Active Filters :
Qty:
Part #:800494
-
All day comfort for tough jobs
The original Webdri PVC on polyester jacket is designed for comfort and toughness. Webdri is a truly comfortable, high performance jacket. Made with a heavy coating and a high loft lining, it can withstand extensive laundering and duty. That is why it is one of our most popular jackets.
Ideal Applications Food Processing, Agriculture, Construction, Manufacturing, and Forestry. Chemical Resistance Many acids, oils, alcohols, salts and alkalies. Batwing sleeve construction and generously cut for maximum freedom of movement. Therm-O-Rad sealed seams for 100% waterproof protection. Storm fly front seals out wind, rain, and contaminants. Attached hood. Heavy duty snaps guaranteed not to fail. Mildew resistant. Stitch bonded non-woven lining defies punctures and tears as well as dissipates moisture. Specialty PVC coating resists fats and oils.
Qty:
Qty:
Part #:804353
- Best Welds SoapstonesProduct DetailsAll white texture for excellent marking qualityGrain cut to ensure good strength and long service lifeMarks will not contaminate welds and are easily removedLow water content for increased hardness and resistance to breakage
Part #:800692
- Alumina Nozzle TIG Cup, 7/16", Size 7, For Torch 17, 18, 26, Gas Lens
Best Welds Alumina Nozzle TIG CupsProduct DetailsExceptionally high impact resistance, heat resistance and thermal conductivityHigher heat resistance than lava nozzlesMost popular nozzle type in TIG weldingResist splatter build-upRecommended for most welding operations except for use in confined areasMade from high strength aluminaHas very good electrical insulating properties
$
1.84
Qty:
Part #:800693
- Alumina Nozzle TIG Cup, 3/8", Size 6, For Torch 17, 18, 26, Gas Lens
Best Welds Alumina Nozzle TIG CupsProduct DetailsExceptionally high impact resistance, heat resistance and thermal conductivityHigher heat resistance than lava nozzlesMost popular nozzle type in TIG weldingResist splatter build-upRecommended for most welding operations except for use in confined areasMade from high strength aluminaHas very good electrical insulating properties
$
2.45
Qty:
Part #:800691
- Best Welds Alumina Nozzle TIG CupsProduct DetailsExceptionally high impact resistance, heat resistance and thermal conductivityHigher heat resistance than lava nozzlesMost popular nozzle type in TIG weldingResist splatter build-upRecommended for most welding operations except for use in confined areasMade from high strength aluminaHas very good electrical insulating properties
$
1.84
PACK
Qty:
Part #:841-900-225M-25-R
- 225 Amp Water Cooled TIG Torch, Flex Head, 25 ft Rubber Cable
Best Welds 225M Series Modular TIG TorchesProduct DetailsMaintains excellent dielectric propertiesTorch heads will not crack5 torch head options2 piece constructionIncludes1PC Rubber Power CableHandleWrenchWater & Gas Hoses
Qty:
Part #:841-900-45V26
- Best Welds Gas Lense Collet BodiesProduct DetailsGas lenses provide a more efficient stream of shielding gas to the welding processThe gas lens virtually eliminates turbulence in the gas shielding stream as it emerges from the nozzleTwo-piece construction
$
17.83
PACK
Qty:
Part #:203957
- Straight Adaptors -22 CTS x MNPT ONE END MALE NATIONAL PIPE THREAD
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:203944
- Straight Couplings SAME CONNECTIONS ON BOTH ENDS - NO INTERNAL PIPE STOP ON STRAIGHT SIZES -22 CTS x -22 CTS
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:203945
- Straight Couplings SAME CONNECTIONS ON BOTH ENDS - NO INTERNAL PIPE STOP ON STRAIGHT SIZES -22 CTS x -22 CTS
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:841-900-3327GE3
- Best Welds Tungsten ElectrodesProduct DetailsLonger life than thoriated electrodesNon-radioactive additivesCan be used in both AC and DC processesExcellent arc starting and stability
Qty:
Part #:130-4771-027
- 5700RING Shut-Off Rod - Centering Ring
$
23.02
Qty:
Part #:203890
- Straight Adaptors ONE END FEMALE NATIONAL PIPE THREAD -22 CTS x FNPT
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:203960
- Straight Adaptors -22 CTS x MNPT ONE END MALE NATIONAL PIPE THREAD
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:203964
- Straight Adaptors -22 CTS x MNPT ONE END MALE NATIONAL PIPE THREAD
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:204387
- Straight Adaptors ONE END MALE NATIONAL PIPE THREAD -33 PEP-7 x MNPT
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:204386
- Straight Couplings SAME CONNECTIONS ON BOTH ENDS - NO INTERNAL PIPE STOP ON STRAIGHT SIZES -33 PEP-7 x -33 PEP-7
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:204022
- Plug Style - AWWA Inlets AWWA x -22 CTS
A.Y. McDonald Plug Style Corporation Stops come standard with a 360º operating head. The one piece body and plug are precisionmachined to assure a perfect match between the plug and the body to allow operating pressures of 100 PSI on 1/2&rdquo, 3/4&rdquo and 1&rdquo valvesand 80 PSI on 1 1/4&rdquo, 1 1/2&rdquo and 2&rdquo valves. This same machining precision carries over to the threads to assure A.Y. McDonald&rsquos highquality and compatibility with direct taps and saddle applications.
$
132.48
Qty:
Part #:204385
- Straight Couplings SAME CONNECTIONS ON BOTH ENDS - NO INTERNAL PIPE STOP ON STRAIGHT SIZES -33 PEP-7 x -33 PEP-7
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:200055
- Straight Couplings CONNECTIONS FOR DISSIMILAR PIPE OR TUBING -22 CTS x -33 PEP-7
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:204403
- Tees SAME END CONNECTIONS ON ALL THREE SIDES -22 CTS x -22 CTS x -22 CTS
A.Y. McDonald Service Fittings are manufactured to meet or exceed the AWWA C800 (latest revision) standard. Our service fittings arerated to withstand the same pressures as the tubing they are designed to fit. They are designed and tested for cold potable water only.EPDM rubber gaskets are used in our Compression fittings.
Qty:
Part #:841-902-2400-OR-40
- Best Welds Heavyweight Fiberglass Fabric, 50 yd x 40 in, Orange
Best Welds Heavyweight Fiberglass FabricProduct DetailsIndustry-strength, plain-weave fiberglass fabric with a light clear acrylic coating to minimize fraying and unraveling of cut edgesDesigned for use in areas where a fabric with high heat resistance is required
Qty:
Displaying: 1 - 24 of 274 Matching Items