Chainsaw
Beveling Tool
View:
Active Filters :
Part #:729-2625-20
- M18&trade HACKZALL® Recip Saw (Tool Only)
Our M18&trade HACKZALL® One-Handed Recip Saw features a Dual Gear Anti-Vibration System providing you with unmatched comfort and control. Its compact, lightweight design gives you superior control and versatility. The cordless recip saw's powerful motor gives you 0-3,000 strokes per minute while its 3/4&rdquo stroke length allows you to perform fast cuts through a wide range of material such as wood, metal, and PVC. The dual gear anti-vibration system increases control and accuracy. The HACKZALL® One-Handed Recip Saw also features a QUIK-LOK&trade blade clamp which allows you to perform fast and easy blade changes.
Qty:
Part #:271920
- M18 FUEL&trade Hackzall® (Tool Only)
The Milwaukee 2719-21 M18&trade FUEL&trade HACKZALL® is the fastest cutting and most powerful one-handed reciprocating saw. Utilizing a POWERSTATE&trade Brushless Motor and a best in class 7/8" stroke length, the M18&trade FUEL&trade HACKZALL® cuts up to 50% faster than competitors. The compact, one-handed design provides superior control and the ability to make cuts in tight spaces. The dual gear counter balance mechanism provides up to 4x lower vibration than traditional reciprocating saws, resulting in faster cut-starts in metal and reduced user fatigue. REDLINK PLUS&trade Intelligence ensures optimized performance and protects your investment from overload, overheating, and over-discharge. The M18&trade REDLITHIUM&trade XC5.0 Battery Pack provides more work per charge and more work over the life of the pack than competitive batteries. A rubber seal and weep holes provide superior protection against water and debris.
Qty:
Part #:729-2872-20
- M18&trade Brushless Threaded Rod Cutter
Our M18&trade Brushless Threaded Rod Cutter is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts.
Qty:
Part #:729-2872-21
- M18&trade Brushless Threaded Rod Cutter Kit
Our M18&trade Brushless Threaded Rod Cutter Kit is Milwaukee's dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4", 3/8" and 1/2" mild steel to 1/4" and 3/8" stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18&trade REDLITHIUM&trade 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts. The Milwaukee Threaded Rod Cutter kit includes one M18&trade REDLITHIUM&trade 2.0Ah Battery, a multi-voltage charger, and a carrying case.
Qty:
Part #:834-601751750
- KFM 9-3 RF (601751750) Metal Bevelling Tool metaBOX 215
Compact metal beveling tool for 45° chamfers and radii of 2 to 3 mm at visible edges
Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
One-touch controller Patented, tool-free setting of the cutting depth in 0.1" steps stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
Slim cutter head with standard carbide indexable inserts and ball-bearing stationary seal ring for working in tubes and in curves
Guide stop for uniform finish and high surface quality when finishing straight edges
Bail handle adjusts without tools for secure, even guiding
Metabo Long-life motor with patented dust protection for long service life
Vario-Constamatic (VC)-Full wave electronics with thumbwheel for working with materials requiring customized speeds, which remain almost constant under load
Electronic safety shutdown of the motor for safe working in case the tool stops unexpectedly
Electronic overload protection, soft start and restart protection
Slim housing for ideal handling
With metaBOX, the smart solution for transportation and storage
$
1,529.98
Qty:
Part #:729-5262-21
- 1" SDS Plus Rotary Hammer Kit
Get up to 40% faster drilling and 15% more life, even in the toughest applications. Designed for the toughest applications, the 1&rdquo SDS-Plus D-Handle Rotary Hammer lasts longer and drills faster than other tools in its class. With a powerful 8-amp motor, it delivers 0-1,620 RPM, 0-5,860 BPM and 2.1 ft-lbs of torque. You&rsquoll get superior drilling speed without sacrificing the power needed to drill larger holes. At just 6.1 pounds, this rotary hammer is easy to use and helps avoid user fatigue. A mechanical clutch protects the motor when the bit binds, and three-mode operation offers maximum versatility. The kit includes a side handle, depth rod and carrying case.
Qty:
Part #:729-2715-22
- M18 FUEL&trade 1-1/8" SDS Plus Rotary Hammer Kit (Discontinued, Replaced by 2915-20)
Powered by FUEL&trade technology, the M18 FUELTM 1-1/8&rdquo SDS Plus Rotary Hammer delivers faster than corded speed, corded durability, and all day work on one charge. The Milwaukee POWERSTATE&trade Brushless Motor Provides 3.3 ft-lbs of impact energy, 0-1,350 RPM, and 0-5,000 BPM. The Milwaukee REDLITHIUM&trade XC5.0 Battery Packs provide all day work on one charge, 20% more power, and 2X more life than standard Lithium-Ion batteries. REDLINK PLUS&trade Intelligence integrates full-circle communication between tool, battery, and charger to protect from overloading, overheating, and over-discharging.
Qty:
Part #:507217
- COO China:
Qty:
Part #:729-5268-21
- Business Unit Tools. Product Level 1 Tools Corded. Product Level 2 Tools Hammers. Product Level 3 TOL SDS Plus. Product Level 4 TOL SDS Plus Hammers. AX Item Number 526821. Country of Origin CHN. Harmonized Tariff 8467290080.:
Qty:
Part #:729-2353-20
- M12&trade Spot Light
Our M12&trade Spot Light delivers up to 750 lumens of TRUEVIEW&trade High Definition Output, making it the most portable, high-performing spotlight in the market. This hand-held spotlight features high and low output modes for versatile beam distance control and added clarity in closer situations. The LED light features a beam distance of 700 Yards, allowing you to spot objects and areas from long distances. We&rsquove added a strobe mode for use in safety situations and the spotlight is impact and water-resistant to survive professional use. We back our rechargeable LED spotlight with a Limited Lifetime Warranty and the LEDs never need to be replaced.
Qty:
Part #:729-2727-21HD
- Business Unit Outdoor Power Equipment. Product Level 1 OPE M18. Product Level 2 OPE Chain Saws. Product Level 3 OPE Rear Handle. Product Level 4 OPE Handheld. Product Level 5 OPE Fuel. AX Item Number 272721HD. Country of Origin MEX. Harmonized Tariff 8467220040.:
Qty:
Part #:729-2719-21
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Cutting. Product Level 3 TOL Hackzall. Product Level 4 TOL 1 Batt. Product Level 5 TOL FUEL. AX Item Number 271921. Country of Origin VNM. Harmonized Tariff 8467220090.:
Qty:
Part #:271822
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Hammers. Product Level 3 TOL SDS Max. Product Level 4 TOL SDS Max/Spline Hammers. Product Level 5 TOL FUEL ONE-KEY. AX Item Number 271822HD. Country of Origin CHN. Harmonized Tariff 8467290080.:
Qty:
Part #:729-2727-20
- Business Unit Outdoor Power Equipment. Product Level 1 OPE M18. Product Level 2 OPE Chain Saws. Product Level 3 OPE Rear Handle. Product Level 4 OPE Handheld. Product Level 5 OPE Fuel. AX Item Number 272720. Country of Origin MEX. Harmonized Tariff 8467220040.:
Qty:
Qty:
Displaying: 1 - 15 of 15 Matching Items