J.H. Williams
Black & Decker (Us) Inc
View:
Active Filters :
Part #:304331
- 20A Double Pole, Double Throw Switch, Brown
Oversize silver alloy contacts for long life and better heat dissipation.
Side wired terminals accept #14 - #10 AWG copper or copper-clad conductors.
Fiber terminal insulation barriers standard.
Can be mounted in standard device boxes or in NEMA 1 sheet steel enclosures.
Bodies, covers, and toggles molded of durable nylon.
Single Pole-Double Throw and Double Pole-Double Throw.
Locking Switches supplied with one 1498-NT key.
Normally open.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
CSA File Number 17949
Qty:
Part #:304966
- Extremely durable for hard-use institutional applications. Spring-loaded covers close automatically when plugs are removed. Die-cast copper-free aluminum construction. Stainless steel springs. Screws and spring covers are chrome-plated brass. Baked-on lacquer finish. Heavy rubber gaskets provide positive seal. All covers below are for 4 screw mounting only. Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
$
12.35
Qty:
closeout
$94.22 MSRP
$
50.21
Part #:308114
- CLOSEOUTS Only 3 Left!
- In-Line Portable 15A GFCI, Manual Reset
In-line portable GFCI interrupter
Qty:
Part #:308442
- 60A Power Interrupting Receptacle, Diecast with Lift Lid Enclosure
$
964.68
Qty:
Part #:521094
- Country of Origin TW:
Qty:
Qty:
Part #:503892
-
Overview
&bull All tools are professional quality, made of high-grade chrome vanadium steel
Qty:
Part #:511684
- 1/2" Drive Crowfoot Wrench Set, Open End, SAE, 12 Pieces
10840 12 Piece 1/2" Drive Crowfoot Wrenches on Clip RailsContents IncludeProduct Code Size (Inches) 10810 15&frasl16 10811 1 10812 1 1&frasl16 10813 1 1&frasl8
10814 1 3&frasl16
10815 1 1&frasl4
10816 1 5&frasl16
10817 1 3&frasl8
10818 1 7&frasl16
10819 1 1&frasl2
10820 1 9&frasl16
10821 1 5&frasl8
Qty:
Part #:508171
- 1" Drive 12-Point SAE 1-3/4" Shallow Socket
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for quick engagement on both 6 and 12 point fasteners
Qty:
Part #:310841
- radiant® Spec Grade 15A Self Test GFCI Receptacle, Brown
Protects against shock caused by ground-fault occurrences. Unlike breaker alternatives, GFCI receptacles make it easier to fix trips with a reset button right on the device.
Conducts an industry-leading automatic self-test every 3 seconds. If the device ever fails, the indicator light flashes to signal it should be replaced.
Equipped with proven SafeLock protection feature if critical components are damaged and protection is lost, power to the outlet is disconnected.
Extends GFCI protection to "downstream" outlets when used with feed-thru wiring configuration. Note Will cut power to face and downstream outlets if wired incorrectly.
Replaces any standard receptacle with ease, in as little as 10 minutes.
Features durable, high-impact resistant thermoplastic construction.
More color options available to fit any style, including finishes to match current hardware and lighting trends.
Complete the look with a sleek, screwless radiant® Wall Plate, and coordinate with other designer switches and outlets available from the radiant® Collection.
Qty:
Part #:503700
- 3/8" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:503704
- 3/4" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:501976
- Product Details
Chrome plating provides increased protection from rust and corrosion
Drive handles provide extra leverage with greater strength than ratchets
Square drive slides on T-Handles for versatility
Flex handle flex drive swivels 11° in either direction
Spring and plunger socket retention
Qty:
Part #:507233
- 7 Pc SAE Nutdriver Set
Hollow shaft accommodates long bolts or studs
Precision machined socket end
Cushion grip handle for comfort
Size imprinted on color coded ends for easy identification
Qty:
Part #:308441
- Power Interrupting Device Accessory Box and Plate
Qty:
Part #:300433
- 60A Power Interrupting Plug, Metallic, Yellow
Quality Materials, durability, and time-tested design
cULus ListingNumber 146159
Qty:
Part #:315113
- Heavy Duty Spec Grade Single Receptacles, Back and Side Wire, 20A, 250V, Brown
Corrosion-resistant, plated steel strap locked in to face and back body to resist pulling away from face/body assembly.
One-piece brass, triple-wipe power contacts for lasting retention.
Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring.
Impact-resistant nylon face and thermoplastic back body.
Internal screw-pressure-plate back wire capable of accepting #14 - #10 AWG solid or stranded copper or copper-clad wire.
Terminal compartments isolated from each other for positive conductor containment.
Tri-drive terminal and mounting screws.
Auto-ground clip assures positive ground.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
cUL ListingNumber 140596
Qty:
Part #:303701
- One Gang Heavy Cast Aluminum Cover Duplex Receptacle Horizontal, Gray
Extremely durable for hard-use institutional applications.
Spring-loaded covers close automatically when plugs are removed.
Die-cast copper-free aluminum construction.
Stainless steel springs.
Screws and spring covers are chrome-plated brass.
Baked-on lacquer finish.
Heavy rubber gaskets provide positive seal.
All covers below are for 4 screw mounting only.
Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
CSA File Number 16807
Qty:
Part #:304510
- 15A NEMA L515 Duplex Receptacle
Compact, impact-resistant nylon face and body are ultrasonically welded together for unrivaled strength.
Face color coding by voltage facilitates locating and mating of proper devices.
One piece, high-grade brass contacts offer excellent conductivity and heat-rise resistance.
Clearly marked NEMA configuration, rating, and third-party listing on each unit's face.
Single-piece, solid brass mounting strap is free of easily loosened rivets found on other brands.
Side and external screw-pressure-plate back wire capability.
Accepts #14 - #10 AWG.
CSA File Number 16063
Qty:
Part #:300790
- Hard Use Spec Grade Receptacle, Back and Side Wire, 20A, 125V, Brown
Corrosion-resistant, plated and tabbed steel strap locked in to face and back body to resist pulling away from face/body assembly.
.032 inch thick, brass, triple-wipe power contacts for lasting retention.
Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring.
Impact-resistant nylon face.
8 hole internal screw-pressure-plate back wire terminals accept #10 - #14 AWG solid or stranded copper or copper-clad conductors.
Terminal compartments isolated from each other for positive conductor containment.
Tri-drive terminal and mounting screws.
Auto-ground clip assures positive ground.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
cULus ListingNumber 140596
Qty:
Part #:302600
- Midget Flanged Outlet - Black Face, Gray Flange
Qty:
Part #:502580
- 1" Drive Adapter 1" Female x 3/4" Male 3"
&bull Specially heat treated for impact use to provide long life, safety, and durability
&bull Pin and o-ring or RET RING® (sold separately) secure tools onto impact wrench for safety and convenience
&bull Universal joint provides 55° range of motion
&bull Suitable for use with pneumatic and electric impact wrenches
&bull Drive end features pin retention hole and groove
Qty:
Part #:810356
- 1" Drive 12-Point SAE 1-1/2" Shallow Socket
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for quick engagement on both 6 and 12 point fasteners
Qty:
Part #:513171
- Country of Origin CN:
Qty:
Displaying: 1 - 24 of 1,140 Matching Items