Cantex
Black and Decker
View:
Active Filters :
Part #:500594
- 1-1/8" Step Bit (#9)
Durable split-point tip for fast, accurate material penetration.
Patented split-step design optimizes chip load for fast, smooth cutting, and more holes per charge.
Progressive cutting edges provides power tool accessory balanced aggression to maximize torque efficiency and minimize stalling.
Improved double flute design for superior chip evacuation, cutting speeds and tool life.
Three-flat shank for all 1/2" drill chucks
Laser markings for quick, easy product and size identification.
Replaced 30008
Also available for sale in a carton, qty. 25 (Cat # GSB09-B UPC # 783310082071)
$
71.95
Qty:
Part #:500536
- 1/2" Step Bit (#1)
Durable split-point tip for fast, accurate material penetration.
Patented split-step design optimizes chip load for fast, smooth cutting, and more holes per charge.
Progressive cutting edges provide balanced aggression to maximize torque efficiency and minimize stalling.
Improved double flute design for superior chip evacuation, cutting speeds and tool life.
Three-flat shank for all 1/2&rdquo drill chucks.
Laser markings for quick, easy product and size identification.
Replaced 34401
Also available for sale in a carton, qty. 25 (Cat # GSB01-B UPC # 783310082057)
Qty:
Part #:500574
- 7/8" Step Bit (#4)
Durable split-point tip for fast, accurate material penetration.
Patented split-step design optimizes chip load for fast, smooth cutting, and more holes per charge.
Progressive cutting edges provides power tool accessory balanced aggression to maximize torque efficiency and minimize stalling.
Improved double flute design for superior chip evacuation, cutting speeds and tool life.
Three-flat shank for all 1/2&rdquo drill chucks.
Laser markings for quick, easy product and size identification.
Replaced 34403
Also available for sale in a carton, qty. 25 (Cat # GSB04-B UPC # 783310082040)
$
55.05
Qty:
Part #:521244
- Extended DTAP Kit
Complete hole drilling, tapping and deburring/countersinking in one operation using power drill to save time and labor
Back tapered beyond tap to prevent thread damage from over-drilling
Made from hardened high-speed steel versus carbon-steel for longer life
High wuality hex shank to ensure strong connection to drill chuck
Designed to tap up to 10 gauge metal
Quick change adaptor included
$
72.00
Qty:
Part #:510307
- 240' Steel Fish Tape
Oil-tempered spring steel for excellent fishing performance
Dirt-free tape finish keeps hands cleaner during use
Advanced comfort handle grip reduces fatigue
Superior rapid tape pay-out and rewind
Smaller Fish Eye with offset bend for improved fishing ability
Improved low profile tip for easy fishing through all sizes of conduit
Viewing Port gives visibility to remaining tape and ability to remove jobsite debris quickly
Rugged case design improves drop impact capability
Flared case with Grip Ridges for no slip handling
Fish tape is available in 50 FT (15
2 m), 65 FT (19
8 m), 125 FT (38
1 m) and 240 FT (73
2 m) lengths
1/8 IN, 1/4 IN and flat steel profiles to accommodate different fishing situations
$
115.80
Qty:
Part #:300016
- Description CANTEX 5133736 is a 1/2 in. Conduit Clamp / Strap which is a U-shaped conduit support used to anchor conduit to interior or exterior surfaces Features Two holes in the feet of the clamp allow mounting the screws or nails Durable non-conductive PVC will not rust or corrode For use with Schedule 40 & 80 conduit UL and CSA listed Made in USA Requires two #10 screws for installation (not included)
$
0.22
Qty:
Part #:301272
- CANTEX 6141625 is a 1 in. Schedule 40 Standard Center Stop Coupling used to join lengths of conduit pipe together with two solvent weld socket ends
Features
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Center stop to help determine proper depth of connection
For use aboveground and underground and non-conductive and sunlight resistant
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
0.21
Qty:
Part #:301354
- CANTEX 6141630 is a 3 in. Schedule 40 Standard Center Stop Coupling used to join lengths of conduit pipe together with two solvent weld socket ends
Features
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Center stop to help determine proper depth of connection
For use aboveground and underground and non-conductive and sunlight resistant
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
1.43
Qty:
Part #:301356
- CANTEX 6141632 is a 4 in. Schedule 40 Standard Center Stop Coupling used to join lengths of conduit pipe together with two solvent weld socket ends
Features
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Center stop to help determine proper depth of connection
For use aboveground and underground and non-conductive and sunlight resistant
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
2.20
Qty:
Part #:301402
- CANTEX 5140112 is a 4 in. Male Terminal Adapter which is a connector used to transition from a spigot end PVC conduit to a threaded metal or PVC plastic female bell end
Features
Durable non-conductive PVC will not rust or corrode
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
3.02
Qty:
Part #:301405
- CANTEX 5133828 is a 2 in. x 90-Degree Plain End Schedule 40 Standard Radius Elbow used to change the direction of a conduit run by 90-Degree
Features
Schedule 40 Nonmetallic PVC construction for strength and durability
For indoor or outdoor use
Suitable for aboveground or buried
Plain-end connections are solvent weld
ETL listed Conforms to UL 651 and NEMA TC-3 Conforms to UL 651 and NEMA TC-3
Made in USA
$
2.09
Qty:
Part #:301414
- CANTEX 5133832 is a 4 in. x 90-Degree Plain End Schedule 40 Standard Radius Elbow used to change the direction of a conduit run by 90-Degree
Features
Schedule 40 Nonmetallic PVC construction for strength and durability
For indoor or outdoor use
Suitable for aboveground or buried
Plain-end connections are solvent weld
ETL listed Conforms to UL 651 and NEMA TC-3 Conforms to UL 651 and NEMA TC-3
Made in USA
$
28.17
Qty:
Part #:301487
- CANTEX 5133821 is a 4 in. x 90-Degree x 36 in. Radius Plain End Schedule 40 Special Radius Elbow used to change the direction of a conduit run by 90-Degree
Features
Schedule 40 Nonmetallic PVC construction for strength and durability
For indoor or outdoor use
Suitable for aboveground or buried
Plain-end connections are solvent weld
ETL listed Conforms to UL 651 and NEMA TC-3 Conforms to UL 651 and NEMA TC-3
Made in USA
$
87.11
Qty:
Part #:301544
- CANTEX 6441001 is a 1/2 in. Enviro-Flex Straight Liquidtight Connector used to connect Enviro-Flex nonmetallic liquidtight flexible tubing to a box opening or threaded female fitting Features Use with Enviro-Flex Liquid Tight Conduit For use in wet or damp locations Durable non-conductive PVC will not rust or corrode Polypropylene sealing ring UL listed
$
2.45
Qty:
Part #:301770
- CANTEX 5133668 is a 2 in. Conduit Body Type LB which provides pull, splice, and tap access for conductors in a conduit system along with a change in direction Features Type LB Conduit Bodies are used to make a 90-degree turn in a conduit run with one opening on top and one opening exiting from the back opposite the cover Durable non-conductive PVC will not rust or corrode For use with Schedule 40 & 80 conduit Includes lid, gasket, and screws UL listed Made in USA
$
23.33
Qty:
Part #:303374
- CANTEX 5133410 is a 2-Gang Weatherproof Blank Cover designed for use with exposed weatherproof boxes
Features
Includes gasket and screws
For use in wet or damp locations
Durable non-conductive PVC will not rust or corrode
UL listed and UL Marine listed
Made in USA
$
5.50
Qty:
Part #:303756
- CANTEX 5133836 is a 2 in. x 90-Degree x 24 in. Radius Plain End Schedule 40 Special Radius Elbow used to change the direction of a conduit run by 90-Degree
Features
Schedule 40 Nonmetallic PVC construction for strength and durability
For indoor or outdoor use
Suitable for aboveground or buried
Plain-end connections are solvent weld
ETL listed Conforms to UL 651 and NEMA TC-3 Conforms to UL 651 and NEMA TC-3
Made in USA
$
22.99
Qty:
Part #:304347
- CANTEX 5133825 is a 1 in. x 90-Degree Plain End Schedule 40 Standard Radius Elbow used to change the direction of a conduit run by 90-Degree Features Schedule 40 Nonmetallic PVC construction for strength and durability For indoor or outdoor use Suitable for aboveground or buried Plain-end connections are solvent weld ETL listed Conforms to UL 651 and NEMA TC-3 Conforms to UL 651 and NEMA TC-3 Made in USA
$
1.56
Qty:
Part #:305525
- CANTEX 5133743 is a 2 in. Service Entrance Caps which is used as the entry point for overhead power and communication wires into a building
Features
Prevents precipitation from entering the conduit into the building
One 1/2 in. and two 3/4 in. knockouts for wire options
Material is Rigid PVC
UL Listed
Made in USA
$
20.90
Qty:
Part #:305527
- CANTEX 5133735 is a 2 in. Conduit Clamp / Strap which is a U-shaped conduit support used to anchor conduit to interior or exterior surfaces Features Two holes in the feet of the clamp allow mounting the screws or nails Durable non-conductive PVC will not rust or corrode For use with Schedule 40 & 80 conduit UL and CSA listed Made in USA Requires two #10 screws for installation (not included)
$
0.52
Qty:
Part #:501682
- Slug-Buster® 1/2" Conduit Size Replacement Punch
Made in USA
Alignment Markings improve punching accuracy and productivity
Punches and dies are clearly marked for quick part identification
$
34.30
Qty:
Part #:504951
- Standard Round 1/2" - 1-1/4" Manual Knockout Set
For use with new Greenlee KRW-1 high-leverage ratchet wrench
Slug-Buster® punch profile splits slugs for easy slug removal
Knurled edge on punches for better grip
New die design optimized for widest range of materials and drivers
Easy threading - draw studs with "dog point" tip helps eliminate cross-threading.
Knockout set punches, dies and case made in the USA
Draw stud manufactured in the USA from US and global components
Laser markings for quick part identification. Alignment markings for improved accuracy.
$
299.00
Qty:
Part #:807974
- 11/16 x 18 Nail Eater® Bit
Improved cutting edge provides 30% longer life span
Patented new design for improved cutting and cleaner holes
Self-feeding screw point draws bit through wood
Unique patented design cutting angle - smoother starts, reduced cutting loads
Made of super tough, heat-treated steel
Cuts through nails and provides longer life
Shorty bits - for working in tight places, yet still can go through three abutting 2 x 4s
See Bit Extensionsif more length is required
P.O.P packaged
$
34.45
Qty:
Part #:500437
- 1/2" Conduit Size Slug-Buster® Manual Knockout Set
Unique punch profile splits slugs allowing for easy slug removal
Knurled edge for better grip
Laser markings for quick part identification
Alignment markings for improved accuracy
Punch and die Made in USA
Replaces 60246
$
60.60
Qty:
Displaying: 1 - 24 of 162 Matching Items