Bosch Power Tools
Apex Tool Group
View:
Active Filters :
- Manufacturer: Apex Tool Group Bosch Power Tools Enerpac
Part #:405675
- #72 "S" Hook, Zinc Plated
For Attaching Accessories to Chain
After Engaging Chain, Close the "S" Hook to Prevent Disengagement
Standard Material Low Carbon Steel
Packaging 50 Per Carton or 6 Per Bag (Except #120, 2 Per Bag). 10 Bags Per Carton
Order Unit is "Each"
DO NOT EXCEED THE WORKING LOAD LIMIT
Do Not Use for Overhead Lifting or Hoisting
Qty:
Part #:841-329-86996
- Extra Large Kneeling Pad
The GEARWRENCH® Kneeling Pad is the super convenient way to keep your knees comfortably off of a hard or rough floor. A built in grab handle makes it easy to position or hang up when not in use. Three layers of high-density solvent resistant foam provide an unmatched degree of cushioning so you can get the job done in comfort. A magnetized recess holds nuts, bolts, and spare parts.
Qty:
Part #:841-277-P-391
- Composite Hand Pumps, Single-Speed, 55 cu in Useable Oil Cap. Max
Enerpac® Composite Hand PumpsProduct DetailsLightweight, compact designHandle lock for easy carryingLower handle effort minimizes operator fatigueInternal pressure relief valve for overload protectionLarge oil capacities to power a wide variety of cylinders and toolsDurable glass-filled nylon reservoir and nylon encapsulated aluminum pump base
$
952.31
Qty:
Part #:841-277-SCL-502H
- RCS502 Cylinder, w/ P392 Hand Pump
Enerpac® Single-Acting Cylinder/Pump SetsProduct DetailsOptimum match of individual componentsAll hand pumps are two-speedIncludesRCS-502 CylinderP-392 Pump
$
3,879.46
Qty:
Part #:841-277-FZ1055
- FZ1055, High Pressure Fitting, Adapter, 10,000 psi Maximum Operating Pressure, Connection from 3/8" NPT Female to 1/4" NPT Male
$
73.04
Qty:
Part #:841-277-P-142
- Enerpac® Composite Hand PumpsProduct DetailsLightweight, compact designHandle lock for easy carryingLower handle effort minimizes operator fatigueInternal pressure relief valve for overload protectionLarge oil capacities to power a wide variety of cylinders and toolsDurable glass-filled nylon reservoir and nylon encapsulated aluminum pump base
$
955.12
Qty:
Part #:841-277-HC-9203
- Series H900
Product Lines Industrial Tools
Crimped-on rubber strain relief for improved life and durability on all models
For demanding applications, featuring a 41 design factor
Maximum working pressure of 10,000 psi
Two layers of steel wire braids
Outside jacket is polyurethane, to provide maximum abrasion resistance
Exhibits low volumetric expansion under pressure to enhance overall system efficiency
$
251.42
Qty:
Part #:811450
- 1/2" Drive 1/2" F x 3/8" M Impact Adapter (Replaces Williams BS-131-BA
GEARWRENCH offers a wide range of impact products in open stock & sets that are designed to deliver the performance and strength that the professional users require. They are made from chrome molybdenum alloy steel for exceptional strength and durability. Our sockets have a manganese phosphate coating to resist corrosion. The sockets also feature highly visible laser etched markings and a secondary size hard stamping. The sockets feature off-corner loading to reduce fastener rounding. The GEARWRENCH impact product family will allow the professional user to FORGE AHEAD.
Qty:
Part #:841-114-HS1910
- 3 In. x 12 In. Scaling Chisel SDS-max® Hammer Steel
Bosch offers a full assortment of SDS-max® hammer steel points and chisels. Bosch brings constant innovation to concrete and masonry drilling with increased effeciency and higher durability. All Bosch chisels are manufactured with a proprietary heat-treat process.
Qty:
Part #:841-114-HS1915
- 2 In. x 12 In. Tile Chisel SDS-max® Hammer Steel
Bosch offers a full assortment of SDS-max® hammer steel points and chisels. Bosch brings constant innovation to concrete and masonry drilling with increased efficiency and higher durability. All Bosch chisels are manufactured with a proprietary heat-treat process.
Qty:
Part #:841-114-HS1917
- 2 In. x 14 In. Scaling Chisel SDS-max® Hammer Steel
Bosch R-Tec technology for SDS-max® chisels use an energy-diverting reflection element that increases material removal by 15%. Because the energy is dispersed back into the work material, the tool and bit do more of the work with less vibration for the user. The R-Tec chisel features a unique cutting head with extra wedges for increased breakout.
Qty:
Part #:841-114-HS1906
- 5 In. x 15 In. Asphalt Cutter SDS-max® Hammer Steel
Bosch offers a full assortment of SDS-max® hammer steel points and chisels. Bosch brings constant innovation to concrete and masonry drilling with increased effeciency and higher durability. All Bosch chisels are manufactured with a proprietary heat-treat process.
Qty:
Part #:841-114-11316EVS
- SDS-max® Demolition Hammer
Bosch hammers offer leading performance. A powerful 14 Amp motor with Constant Response circuitry. This provides a constant hard-hitting 12.4 Ft./Lbs. Of impact energy. Variable speed control allows users to adjust the impact force to the material being removed. The SDS-max® tool holder provides you with the largest assortment of Bosch brand steel accessories for every job. The padded rear handle absorbs shock for operator comfort.
Includes
Auxiliary Handle
Carrying Case
Benefits
SDS-max® bit system for tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate
Variable-speed dial for controlled chipping applications
Constant Response circuitry provides soft-start, maintains constant speed under load and provides overload protection
Service Minderlight indicates when preventative maintenance is required
In chisel mode, Vario-Lock positioning allows chisel to be rotated into 12 different positions to optimize the working angles
Padded rear handle absorbs shock for operator comfort
360° Auxiliary handle provides a wide range of movement along with operator comfort
Double insulated, UL listed, complies to OSHA
Qty:
Part #:841-329-80430
- 3/8" Drive Hex Bit Metric Socket 9mm
GEARWRENCH bit sockets have heat treated alloy steel base sockets for durability and long tool life. Our bits are manufactured from S2 steel for maximum strength. The hex bit sockets help users loosen & tighten internal hex fasteners.
Qty:
Part #:841-185-WE1010NA
- For many reasons, the Weller WE 1010 soldering station is a smart soldering solution for several different types of jobs. If you want a powerful tool that gets the job done quickly and reliably, try the WE 1010. This unit has many advantages, but some of its main draws are its
Power With the WE1010NA digital soldering station, you'll have exceptional power to get the job done fast. As the most powerful soldering station in its class, the 120V, 70W power station helps you work efficiently, reliably and precisely. With 40 percent more power than the WES / WESD station, the WEP 70 soldering iron heats up faster and has a shorter recovery time, which helps you produce high-quality results and get more done every time.
Ease of use The WE 1010 is extraordinarily user-friendly. The controls are designed to be intuitive, and the iron features an ergonomic design that's easier to control. The power station features an easy-to-read LCD screen, three push buttons and a power switch on the front of the unit. The iron is lightweight and features a pencil design that makes for comfort and easy maneuvering.
Precision When you use this product, you'll be able to more easily deliver consistently high-quality results. The smooth handling and control that the WEP 70 soldering iron offers and its user-friendly controls contribute to this quality. The excellent temperature stability and accuracy of the unit have a significant impact as well. Additionally, you can use a range of tips and temperatures to reliably get the exact results you need.
Safety WE1010NA has numerous features that will reduce potential hazards throughout your workday. It features a reinforced safety rest that provides extra stability when storing the iron between uses. The cables of the iron are also heat-resistant and meet industry standards for mechanical strength. The unit is also ESD safe and UL and CE certified for electrical safety.
Cost efficiency Despite having all of these incredible features, the WE 1010 is an extremely cost-effective tool. It's an affordable soldering iron overall and also contains elements meant to help you save money as you use it. The ET tips that the iron uses have an extremely long life, which significantly reduces operational costs. It also has a standby mode that the iron automatically enters into when not in use, which helps reduce energy use and further extend the life of your tips.
$
269.59
Qty:
Part #:841-193-7679038
- 020418224010
Swaging Tools, 1/8 in - 3/16 in Rope
Campbell® Swaging ToolsProduct DetailsFor swaging ferrules onto wire rope or cableDo Not use on coated cableIf used on coated cable, remove the coating from the assembly area
Qty:
Part #:841-277-TM5
- Enerpac® Tension MetersProduct DetailsZinc and bronze plated to resist rust and corrosionCushioned metal case provides safe storage and transportMaximum indicating pointer reading for pre-selected forces or to maintain maximum force readingsIncludesCushioned Metal Case
$
4,168.81
Qty:
Qty:
Part #:841-182-PQR1316N
- Country of Origin PEOPLE'S REPUBLIC OF CHINA HAZMAT Item NO Special Order Item NO State Restricted NO:
Qty:
Part #:841-192-CDS12N
- Product Category HAND TOOLS/Product Subcategory SOCKETS RATCHETS ADAPTORS & EXTENSIONS
Qty:
Part #:841-277-HF-101
- UPC 662005212545
Enerpac® Hydraulic OilsProduct DetailsMaximum pump volumetric efficiencyMaximum internal heat transferPrevents pump cavitationAdditives prevent rust, oxidation and sludgeHigh viscosity indexMaximum film protective lubricity
$
103.94
GAL
Qty:
Part #:841-277-IPL-100
- IPL100, Hydra-Lift for Daylight Adjustments, For 25 - 100 ton H-Frame Presses
$
1,577.35
Qty:
Part #:841-277-RC-106
- RC Series Single Acting Cylinders, 10 tons, 6.13 in Stroke Length
UPC 662005300822
Enerpac® RC Series Single Acting CylindersProduct DetailsBaked enamel finish for increased corrosion resistanceCollar threads, plunger threads and base mounting holes enable easy fixturing (on most models)CR400 Coupler and Dust Cap are included on all modelsHigh strength alloy steel for durabilityIncludesCR-400 CouplerDust Cap
$
1,088.55
Qty:
Part #:841-277-RC-254
- Product Category MATERIAL HANDLING/Product Subcategory JACKS LIFTS & HYDRAULICS
$
1,619.49
Qty:
Displaying: 1 - 24 of 56 Matching Items