Jamesbury
Brady
Part #:521321
- Technical Specifications
Pipe O.D. (inch) 1-1/2
Length (ft) 20
Color Blue
Length (m) 6
Pipe O.D. (mm) 40
Pipe Outside Diameter 1-1/2 inch, 40 mm
Length 20 ft, 6 m
Color Blue
Maximum Operating Pressure 232 psi, 15.9 bar
Minimum Operating Temperature -4 °F, -20 °C
Maximum Operating Temperature +115 °F, +46.1 °C
Weight 6.22 lb, 2.82 kg
Vacuum Pressure Rating 29.6 Inch-Hg
Materials of Construction Powder Coated Aluminum
Application Compressed Air, Vacuum, Industrial/Inert Gases
Specifications Met EN 755.2, EN 755.8, EN 573.3, ISO 9001, ASME B31.1 - 31.9, ISO 8573 (Air Quality), TUV Certification, CE Conformity, QUALICOAT
$
27.39
Qty:
Part #:701147
- 1-1/2in Jamesbury 9F Series/Eliminator 2000 Fire-Tite Threaded Ball Valve. Carbon steel body with stainless steel ball and stem. Jamesbury Xtreme seats with TFM seals. Non-ANSI Class Jamesbury Part # MA00102009FB2236XTB
Qty:
Part #:701202
- 1-1/2in Jamesbury 9F Series/Eliminator 2000 Fire-Tite Threaded Stainless Steel Ball Valve. Stainless steel body with stainless steel ball and stem. Jamesbury Xtreme seats with TFM seals. Non-ANSI Class Jamesbury Part # MA00102129FB3600XTB
Qty:
Part #:702283
- 1-1/2in Jamesbury 6F Value-Line Series Fire-Tite Medium Pressure Threaded Ball Valve. Carbon steel body with stainless steel ball and stem. Seats and seals are filled PTFE with secondary graphite seal. Jamesbury Part # MA0017879 6F2236MTB
Qty:
Part #:702980
- 1-1/2in Jamesbury Clincher Series 2000 2-Piece Threaded Ball Valve. Brass body with brass ball and stem. Seats and seals are PTFE. Assembled dry, no silicone. Jamesbury Part # MA0017858 211100TTC061
Qty:
Part #:703544
- Offset Shaft and Eccentric Disc • No seat/disc contact in the open or intermediate position • Eliminates wear points at top and bottom of seats for higher cycle life • Reduces torque requirements, allowing for smaller operators Fire-Tested Version Available • Fire-Tite® Wafer-Sphere valves have been tested to API 607 and ISO-10497-5:
- 2004 Positive Shaft Retention • 2-1/2” - 24” (DN 65 - 600) valves are equipped with a retaining ring at the top of the shaft to prevent movement of the top portion of the shaft past the compression ring if for any reason the shaft should break within the valve. Easy Seat Maintenance • Simply remove body insert and replace seat – disassembly of disc and shaft is not required. Excellent for both On-Off and Control Applications • Superior control characteristics. • Inherent flow characteristic is modified equal percentage. • Wide rangeability. • Tight shut-off even in control applications. •Standard lugged style valves are suitable for bidirectional dead-end service at the full pressuretemperature rating of the valve.
Qty:
Part #:704796
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:706815
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:708927
- Offset Shaft and Eccentric Disc • No seat/disc contact in the open or intermediate position • Eliminates wear points at top and bottom of seats for higher cycle life • Reduces torque requirements, allowing for smaller operators Fire-Tested Version Available • Fire-Tite® Wafer-Sphere valves have been tested to API 607 and ISO-10497-5:
- 2004 Positive Shaft Retention • 2-1/2” - 24” (DN 65 - 600) valves are equipped with a retaining ring at the top of the shaft to prevent movement of the top portion of the shaft past the compression ring if for any reason the shaft should break within the valve. Easy Seat Maintenance • Simply remove body insert and replace seat – disassembly of disc and shaft is not required. Excellent for both On-Off and Control Applications • Superior control characteristics. • Inherent flow characteristic is modified equal percentage. • Wide rangeability. • Tight shut-off even in control applications. •Standard lugged style valves are suitable for bidirectional dead-end service at the full pressuretemperature rating of the valve.
Qty:
Part #:710082
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:703278
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:504390
- Pliers, Needle Nose Side-Cutters, 6-Inch
&bull Induction hardened cutting knives for long life&bull Knurled jaws for sure wrapping and looping&bull Slim head design for working in confined areas&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Curved handles provide greater tool control&bull Plastic-dipped handles for comfort and ease of identification&bull Custom, US-made tool steel
Qty:
Part #:812334
- Pliers, Standard Needle Nose Pliers, Spring-Loaded, 6-Inch
&bull Knurled jaws for sure wrapping and looping&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Slim head design for working in confined areas&bull Spring-loaded action for self-opening&bull Curved handles provide greater tool control&bull Plastic-dipped handles for comfort and ease of identification&bull Custom, US-made tool steel
Qty:
Part #:800586
- Diagonal Cutting Pliers, Heavy-Duty, All-Purpose, 6-Inch
&bull Short jaws and beveled cutting edges permit close cutting of wire&bull Tapered nose for easy working in confined areas&bull Short jaws and beveled cutting edges permit close cutting of wire&bull Induction-hardened cutting knives for long life&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Plastic-dipped handles for comfort and ease of identification&bull Custom, US-made tool steel
Qty:
Part #:707371
- 1-1/2in Jamesbury Clincher Series 2000 2-Piece Fire-Tite Threaded Ball Valve. Carbon steel body with stainless steel ball and stem. Seats and seals are PTFE with secondary graphite seal. Jamesbury Part # MA0017843232236TTA1
Qty:
Part #:509730
- Country Origin MX:
$
96.50
Qty:
Part #:500984
- Diagonal Cutting Pliers, Tapered Nose, 6-Inch
Pliers with tapered nose are designed for working in tight spaces
Short jaws and beveled cutting edges permit close cutting of wire
Induction-hardened cutting knives for long life
Hot-riveted joint ensures smooth action and no handle wobble
Forged in the USA with custom, US-made tool steel
Plastic-dipped handles for comfort and ease of identification
Qty:
Part #:521331
- Technical Specifications
Pipe O.D. (inch) 1-1/2
Pipe O.D. (mm) 40
Connection Thread Size (inch) N/A
Pipe O.D. 2 (mm) N/A
Shape 90° Elbow
Pipe O.D. 2 (inch) N/A
Shape 90° Elbow
Pipe Outside Diameter 1-1/2 inch, 40 mm
Connection 2 Pipe Outside Diameter N/A
Connection Thread Size N/A
Materials of Construction Body Polyamide with Fiberglass Gripping Ring Stainless Steel O-Ring NBR
Maximum Operating Pressure 232 psi, 15,9 bar
Minimum Operating Temperature -4 °F, -20 °C
Maximum Operating Temperature 140 °F, 60 °C
Vacuum Pressure Rating 29.6 Inch-Hg
Application Compressed Air, Vacuum, Industrial/Inert Gases
Specifications Met EN 755.2, EN 755.8, EN 573.3, ISO 9001, ASME B31.1 - 31.9, ISO 8573 (Air Quality), TUV Certification, CE Conformity
$
159.12
Qty:
Part #:521332
- Technical Specifications
Pipe O.D. 2 (inch) N/A
Pipe O.D. (inch) 1-1/2
Pipe O.D. 2 (mm) N/A
Connection Thread Size (inch) N/A
Pipe O.D. (mm) 40
Shape Union Connector
Shape Union Connector
Pipe Outside Diameter 1-1/2 inch, 40 mm
Connection 2 Pipe Outside Diameter N/A
Connection Thread Size N/A
Materials of Construction Body Polyamide with Fiberglass Gripping Ring Stainless Steel O-Ring NBR
Maximum Operating Pressure 232 psi, 15,9 bar
Minimum Operating Temperature -4 °F, -20 °C
Maximum Operating Temperature 140 °F, 60 °C
Vacuum Pressure Rating 29.6 Inch-Hg
Application Compressed Air, Vacuum, Industrial/Inert Gases
Specifications Met EN 755.2, EN 755.8, EN 573.3, ISO 9001, ASME B31.1 - 31.9, ISO 8573 (Air Quality), TUV Certification, CE Conformity
$
127.44
Qty:
$
333.46
Qty:
$
296.36
Qty:
Part #:509735
- Technical Specifications
Shape Equal Tee
Pipe O.D. (inch) 1-1/2
Connection Thread Size (inch) N/A
Pipe O.D. (mm) 40
Pipe O.D. 2 (mm) N/A
Pipe O.D. 2 (inch) N/A
Shape Equal Tee
Pipe Outside Diameter 1-1/2 inch, 40 mm
Connection 2 Pipe Outside Diameter N/A
Connection Thread Size N/A
Materials of Construction Body Polyamide with Fiberglass Gripping Ring Stainless Steel O-Ring NBR
Maximum Operating Pressure 232 psi, 15,9 bar
Minimum Operating Temperature -4 °F, -20 °C
Maximum Operating Temperature 140 °F, 60 °C
Vacuum Pressure Rating 29.6 Inch-Hg
Application Compressed Air, Vacuum, Industrial/Inert Gases
Specifications Met EN 755.2, EN 755.8, EN 573.3, ISO 9001, ASME B31.1 - 31.9, ISO 8573 (Air Quality), TUV Certification, CE Conformity
$
179.45
Qty:
Displaying: 1 - 24 of 41 Matching Items