Fluke
Bussmann Division
View:
Active Filters :
- Brand: Bussmann Division Fluke Radians Wiremold
Qty:
closeout
Part #:301870
- CLOSEOUTS Only 1 Left!
- Key features
Current Range0.1 to 100A DC or 0.1 to 70A AC
Basic Accuracy (DC to 1kHz) 100mV/A setting50mA to 10A +/- 3% of reading + 50mA 10mV/A setting50mA to 40A +/- 4% of reading + 50mA 40A to 80A +/- 12% of reading + 50mA 80 to 100A +/- 15% of reading
Output Signal10A range 100mV/A 100A range 10mV/A
Bandwidth1Hz to 20kHz
Working Voltage600V AC rms
Maximum Conductor Size11.8 mm (.46 inch) diameter
Safety RatingIEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V
$
440.00
Qty:
Qty:
closeout
$
165.00
Qty:
Part #:302002
- Key features
Converts a DMM to a thermometer
For use with type-K thermocouples in low voltage applications (below 24 V AC, 60 V DC)
Measurement range -50 to 1000 °C (probe dependent)
One year warranty
Qty:
Qty:
Qty:
Qty:
Part #:306373
- Key features
Detect live voltage even when the batteries are dead
3 forms of AC/DC voltage indication light, sound, and vibration for added user protection and convenience
Backlit LCD display and hold function for easier viewing in hard-to-test areas
Qty:
Part #:306973
- Key features
Voltbeat&trade technology and continuous self-test &ndash so you always know it's working
20 V to 90 V AC control circuit detection
Upon detection, tip glows and beeper sounds
CAT IV 1000 V for added protection
Expanded range also available 90 V AC to 1000 V AC
Two-year warranty
Batteries included
On/Off button
Audible/Silent
$
55.07
Qty:
closeout
$
99.00
Qty:
closeout
$
249.00
Qty:
Part #:307015
- Key features
Non-contact voltage detection from 90 to 1000 V AC
Innovative 'Battery Check' ensures battery is in good condition
Integrated clip design, optimized for pocket storage
Always on for faster, safer voltage testing
The Fluke 2AC is the latest addition to the VoltAlert&trade AC non-contact voltage tester family. It is designed to be pocket-sized and easy to use. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present. The 2 AC is always on, with a battery check function to make sure the tester is working properly.
Your first-choice tool for go/no-go testing
The 2AC tests for energized circuits and defective grounds, whether it's for an electrician on the factory floor or the do-it-yourselfer around the house.
CAT IV 1000 V overvoltage rated product for best in class user protection
Suitable for a wide range of residential, commercial and industrial needs
Fluke ruggedness and reliability with a two-year warranty
Use of Battery Check function is optional and for convenience only, it is not intended as a substitute for checking the unit on a known live source before and after use.
$
36.99
Qty:
Part #:307341
- Key features
The Fluke i1010 AC/DC current clamp is a battery-powered Hall-effect probe that extend the current ranges of Fluke tools, measuring DC current from 1 A to 1000 A and AC current from 1 A to 600A.
Provides accurate current reading without breaking the circuit.
Compatible with most Fluke multimeters.
CAT III 600 V safety rating
Qty:
Part #:307502
- Key features
Remotely log, trend and monitor measurements to pinpoint intermittent faults via Fluke Connect®
Inrush measurement to filter out noise and capture motor starting current
Measures AC/DC current to 1000A and AC current to 2500 A with iFlex current probe
Integrated VFD low pass filter for accurate motor drive measurements
$
594.98
Qty:
Part #:307561
- Key features
Oiled genuine top grain cowhide
Rugged construction with heavy duty stitching and reinforced rivets
Large tool belt loop and top flap to secure meter
Holds most Fluke DMMs, thermometers, and process calibrators
One year warranty
Qty:
Part #:309666
- Key features
All functionality of the 87V Industrial Digital Multimeter, plus
Fully insulated 3 mm exposed metal test probes for electricians working in high energy environments
C35 Soft Carrying Case holds meter, test leads and other accessories
TPAK magnetic hanging strap lets you attach the meter to any ferrous surface, such as cabinets and iron pipes.
Qty:
Part #:310102
- Key features
Non-contact AC voltage tester and LED flashlight
Detects from 90 to 600 V AC
Features dual-sensitivity for two levels of detection
Indicates proximity to AC voltage source with blue light
Indicates you&rsquore at the source with red light
Ultra-bright white LED light with 100,000-hour bulb life
Safety rated to CAT IV 600 V
Operating temperature 0°C to 50°C
AAA battery included
$
62.19
Qty:
Qty:
Part #:310271
- Key features
Zippered carrying case with detachable external pouch
Accomodates Fluke 120 Series ScopeMeter Testtool or a handheld DMM, both main instrument and test accessories
Front pouch can be detached for optimal flexibility
1 year warranty
Qty:
Part #:509917
- The Radians RWG22 Hi-Viz work glove provides excellent protection from abrasion. The seamless design of the 13 gauge, polyester shell with the polyurethane dipped palm provides protection in wet or dry conditions and a comfortable fit in hazardous applications.
Applications Construction, Assembly, Automotive, General Purpose, Manufacturing, Shipping, Warehousing
Features
13 gauge hi-viz yellow polyester shell.
Polyurethane palm dip provides protection from abrasion in wet or dry conditions.
Seamless design provides a comfortable fit.
ASTM Abrasion Level 2.
Meets EN 3882003 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (3 1 3 1).
Qty:
Part #:510017
- Radians Granite&trade Cap Style Hard Hats are comfortable and stylish, offering versatile protection. All Hard Hats Meet ANSI Z89.1-2014 Type 1 &ndash Class G & E Standards.
Features
Pillowed Brow Pad.
Nylon Crown Strap Suspensions.
Vertical Height Adjustment.
Quick Ratchet Adjustment System.
Easy Pinlock Adjustment System.
High Density Polyethylene Construction.
Universal Accessory Slots.
All Hard Hats Meet ANSI Z89.1-2014 Type 1 &ndash Class G & E Standards.
Made in the USA.
Qty:
Part #:510555
- Every once in a while, a revolutionary innovation comes along that really makes a difference in how you see things. Radians new IQuity&trade Anti-Fog Coating is a breakthrough technology that provides one of the most superior and long-lasting anti-fog coatings in the marketplace at a competitive price. It is both EN166K and N compliant. The water-based coating lasts much longer because the anti-fog and anti-scratch properties are built into the lens for long-term wear and durability. Radians Obliterator&trade IQ foam lined safety eyewear comes with a removable foam lining and adjustable headstrap.
Qty:
Displaying: 49 - 72 of 325 Matching Items