CDA Brass 360
Acrylic/PTFE
View:
Active Filters :
- Material: Acrylic/PTFE CDA Brass 360 Leather Zinc Plated Steel
Part #:503802
-
PIP® Superior Grade Split Cowhide Leather Welder's Glove with Cotton/Foam Lining and DuPont&trade Kevlar® Stitching
Side Split Cowhide leather construction provides comfort, durability, excellent abrasion resistance, and breathability
Side Split leather is durable and provides excellent protection due to its dense fibers
Fully welted to protect seams from abrasions
Stitched with Kevlar® adding strength and burn resistance
Cotton/foam lining gives welders additional heat protection but still absorbs moisture
One-piece back for extended glove life
Wing thumb increases comfort in open-handed work
Double reinforced palm and thumb strap increases durability and provides added protection at common wear points
Part #:506775
- Pinch-On Double Ear Clamp Attributes
Weight
0.0065 lb
Mandatory Package/Box Quantity
100
Material
Zinc Plated Steel
Nominal Size
1/2"
Range
.425" to .512" (10.8 mm to 13.0 mm)
Part #:512113
- Pinch-On Double Ear Clamp Attributes
Weight
0.0115 lb
Mandatory Package/Box Quantity
100
Material
Zinc Plated Steel
Nominal Size
19/32"
Range
.551" to .669" (14.0 mm to 17.0 mm)
$
0.71
Qty:
Part #:521697
- Pinch-On Double Ear Clamp Attributes
Weight
0.0118 lb
Mandatory Package/Box Quantity
100
Material
Zinc Plated Steel
Nominal Size
5/8"
Range
.591" to .709" (16.0 mm to 19.0 mm)
$
0.71
Qty:
Part #:500645
- Round Hole Strainer Attributes
Weight
3.14 lb
Material
Zinc Plated Steel
Thread
NPSM
Thread Size
4"
$
36.84
Qty:
Part #:504266
- Pinch-On Double Ear Clamp Attributes
Weight
0.0208 lb
Mandatory Package/Box Quantity
100
Material
Zinc Plated Steel
Nominal Size
13/16"
Range
.709" to .866" (18.0 mm to 22.0 mm)
$
1.28
Qty:
Part #:334-1720
- Pinch-On Double Ear Clamp Attributes
Weight
0.0137 lb
Mandatory Package/Box Quantity
100
Material
Zinc Plated Steel
Nominal Size
3/4"
Range
.638" to .787" (16.2 mm to 20.0 mm)
$
0.75
Qty:
Part #:805892
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:506357
- Steel 3500 Male Nipple Attributes
Weight
0.45 lb
Material
Zinc Plated Steel
Male Thread
NPT
Hose Size
3/4"
Male Thread Size
3/4"
Pressure Rating
600 PSI at 70°F (21°C)
$
10.05
Qty:
Part #:802497
- Round Hole Strainer Attributes
Weight
1.95 lb
Material
Zinc Plated Steel
Thread
NPSM
Thread Size
2"
$
25.40
Qty:
Part #:334-2700LN-6
- JIC 37° Flare Bulkhead Union with Lock Nut Attributes
Weight
0.15 lb
Material
Zinc Plated Steel
Male Thread
JIC 37° Flare
Working Pressure
5000 PSI
Male Thread Size
9/16"-18
$
2.70
Qty:
Part #:334-3510
- Steel 3500 Male Nipple Attributes
Weight
0.195 lb
Material
Zinc Plated Steel
Male Thread
NPT
Hose Size
1/2"
Male Thread Size
3/8"
Pressure Rating
600 PSI at 70°F (21°C)
$
7.06
Qty:
Part #:512561
- Steel 3500 Male Nipple Attributes
Weight
0.18 lb
Material
Zinc Plated Steel
Male Thread
NPT
Hose Size
1/2"
Male Thread Size
1/4"
Pressure Rating
600 PSI at 70°F (21°C)
$
7.04
Qty:
Part #:512591
- Steel 3500 Male Nipple Attributes
Weight
0.1 lb
Material
Zinc Plated Steel
Male Thread
NPT
Hose Size
1/4"
Male Thread Size
3/8"
Pressure Rating
600 PSI at 70°F (21°C)
$
13.16
Qty:
Part #:801844
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:801891
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:805053
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:805054
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:805087
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:805090
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:805091
- The SEPCO ML2225 are saturated and sealed with the PTFE particles, protecting the fibers from chemical action. A surface coating of PTFE is applied after braiding to assure good break-in characteristics, also a special high temperature lubricant is added. The ML2225 is a great general service on rotary and reciprocating pumps, and agitators. Yarns are coated in PTFE suspensoid.This system of impregnation assures even distribution of the PTFE particles, protecting the fibers from chemical action.
Part #:804297
- Boss® Clamp 2 Bolt Type, 2 Gripping Fingers Attributes
Weight
1.52 lb
Material
Zinc Plated Iron
Torque
21 ft. lbs.
Hose ID
1" (25 mm)
Hose OD To
1-60/64" (49.2 mm)
Hose OD From
1-44/64" (42.9 mm)
$
15.05
Qty:
Part #:512590
- Steel 3500 Male Nipple Attributes
Weight
0.07 lb
Material
Zinc Plated Steel
Male Thread
NPT
Hose Size
1/4"
Male Thread Size
1/4"
Pressure Rating
600 PSI at 70°F (21°C)
$
6.78
Qty:
Part #:512587
- Steel 3500 Male Nipple Attributes
Weight
0.13 lb
Material
Zinc Plated Steel
Male Thread
NPT
Hose Size
3/8"
Male Thread Size
3/8"
Pressure Rating
600 PSI at 70°F (21°C)
$
7.06
Qty:
Displaying: 1 - 24 of 50 Matching Items