Campbell
Asc Engineered Solutions
View:
Active Filters :
- Brand: Asc Engineered Solutions Campbell Hayward J.H. Williams Milwaukee
- Alt. Size: 1"
Part #:700652
- The TBH Series features a low maintenance design with its new patent pending System2&trade Sealing Technology. Assisting users in protecting property and life, a standard integral lock-out feature secures onto the body of the valve. Actuator ready design with ISO 5211 pattern &ndash on all sizes. The System2&trade Sealing Technology utilizes the upstream seat as a backup to the downstream seat and enhances the sealing of the downstream seat. This insures longer life cycle and performance of the valve vs. conventional PTFE seats or seats with O-ring backing where uneven seat wear results in early failure mode. Available in sizes 1/4 through 2&rdquo / DN15 - DN50 in PVC and CPVC materials, the TBH Series are fully pressure rated for 250 PSI / PN16 at 70°F/23°C non-shock across all sizes and materials. Lastly, the TBH is available with IPS or DIN/EN socket, threaded and flanged end connections.
Full 250 psi / PN16 Rating, Non-Shock at 70°F / 23°C
Integral ISO 5211 Mounting Pad for Easy Actuation
Standard Lock-Out Plate, Lock-Out / Tag-Out for up to 4 Locks
System2&trade Sealing Technology Seat Carrier Design &ndash Patent Pending
Permanent Laser Markings, Eliminates Labels
System friendly ""Molded-In"" Footpad for Skid or Panel Mount
UV Resistant Sure Grip Ergonomic Handle
FPM or EPDM Seals
Double O-Ring Stem Seals
Reversible PTFE Seats - Standard
Easy Replacement for Existing Hayward TB Series
Qty:
Part #:700813
- The TBH Series features a low maintenance design with its new patent pending System2&trade Sealing Technology. Assisting users in protecting property and life, a standard integral lock-out feature secures onto the body of the valve. Actuator ready design with ISO 5211 pattern &ndash on all sizes. The System2&trade Sealing Technology utilizes the upstream seat as a backup to the downstream seat and enhances the sealing of the downstream seat. This insures longer life cycle and performance of the valve vs. conventional PTFE seats or seats with O-ring backing where uneven seat wear results in early failure mode. Available in sizes 1/4 through 2&rdquo / DN15 - DN50 in PVC and CPVC materials, the TBH Series are fully pressure rated for 250 PSI / PN16 at 70°F/23°C non-shock across all sizes and materials. Lastly, the TBH is available with IPS or DIN/EN socket, threaded and flanged end connections.
Full 250 psi / PN16 Rating, Non-Shock at 70°F / 23°C
Integral ISO 5211 Mounting Pad for Easy Actuation
Standard Lock-Out Plate, Lock-Out / Tag-Out for up to 4 Locks
System2&trade Sealing Technology Seat Carrier Design &ndash Patent Pending
Permanent Laser Markings, Eliminates Labels
System friendly ""Molded-In"" Footpad for Skid or Panel Mount
UV Resistant Sure Grip Ergonomic Handle
FPM or EPDM Seals
Double O-Ring Stem Seals
Reversible PTFE Seats - Standard
Easy Replacement for Existing Hayward TB Series
Qty:
Part #:703650
Qty:
closeout
$22.83 MSRP
$
13.03
Part #:511947
- CLOSEOUTS Only 10 Left!
-
1" Heavy Wire Rope Thimble, Galvanized
Standard Material Hot Rolled, Mild Steel
Galvanized
Imported
A Thimble is a Wear Pad That Protects the Rope From Cuts, Kinking and Abrasions. Always Use An Appropriate Thimble When Making An Eye in a Rope.
When it is Necessary to Open a Thimble to Insert a Fitting, Make Sure the Points are Properly Aligned When the Thimble is Closed. Inspect Carefully for Cracks.
Thimbles ARE NOT Designed for Load Carrying Purposes Therefore Working Load Limits Have Not Been Established.
Qty:
Hayward 1in PVC Y-Strainer with Threaded End Connections 1/32in Perf Screen and FPM O-Rings YS10100T
Qty:
Part #:812981
- 12" Extra-Long Cold Chisels
Designed for cutting, shaping and removing metal softer than the cutting edge of the chisel
Qty:
Part #:503706
- 1" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:810250
- 8" Cold Chisels 1"
The most commonly used chisels in the chisel line
For cutting, shaping and removing metal softer than the cutting edge of the chisel
Qty:
Part #:503694
- 1" Shank Diameter Eyebolts Plain Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Plain pattern eyebolts must never be used to lift an angular load
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:500382
- 1" 12-Point SAE SUPERCOMBO® Combination Wrench
&bull SUPERCOMBO® open end has specially designed grooves that direct wrench force away from fastener corners
&bull SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points
&bull Meets or exceeds AErospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application
&bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy
&bull Box and open end openings are identical
Qty:
Part #:701244
Qty:
Qty:
Part #:702735
- new upc
Qty:
Part #:505774
- Medium Soft-Face Hammer Tip 1"
Heavy-duty construction for strength and durability
Qty:
Part #:811936
- Medium Hard Soft-Face Hammer Tip 1"
Heavy-duty construction for strength and durability
Qty:
Part #:500481
- 1/2" Drive Deep Sockets, for 6 and 12-Point Fastners, SAE
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for quick engagement on both 6 and 12 point fasteners
Qty:
Part #:500487
- 3/4" Drive Shallow Sockets, 12-Point, SAE, High Polished Chrome Finish
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for quick engagement on both 6 and 12 point fasteners
Qty:
Part #:507846
- 1/2" Drive SAE 1" Impact Deep Socket
SUPERTORQUE lobular openings for greater turning power without deforming the fastener
Designed for maximum engagement on 6 point fasteners
Suitable for use with pneumatic and electric impact wrenches
Specially heat treated for impact use to provide long life, safety, and durability
Qty:
Part #:811833
- 1/2" Drive SAE 1" Impact Shallow Socket
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for maximum engagement on 6 point fasteners
&bull Suitable for use with pneumatic and electric impact wrenches
&bull Specially heat treated for impact use to provide long life, safety, and durability
Qty:
Part #:503782
- 1/2" Drive 6-Point SAE 1" Deep Socket
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for maximum engagement on 6 point fasteners
Qty:
Part #:812935
- 1/2" Drive 6-Point SAE 1" Shallow Socket
SUPERTORQUE lobular openings for greater turning power without deforming the fastener
Designed for maximum engagement on 6 point fasteners
Qty:
Part #:500463
- 1/2" Drive 12-Point SAE 1" Shallow Socket
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for quick engagement on both 6 and 12 point fasteners
Qty:
Part #:507853
- 3/4" Drive SAE 1" Impact Shallow Socket
SUPERTORQUE lobular openings for greater turning power without deforming the fastener
Designed for maximum engagement on 6 point fasteners
Suitable for use with pneumatic and electric impact wrenches
Specially heat treated for impact use to provide long life, safety, and durability
Qty:
Part #:501163
- 1" 12-Point SAE SUPERCOMBO® Black Industrial Finish Combination Wrench
&bull SUPERCOMBO® open end has specially designed grooves that direct wrench force away from fastener corners
&bull SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points
&bull Meets or exceeds AErospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application
&bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy
&bull Box and open end openings are identical
Qty:
Displaying: 1 - 24 of 30 Matching Items