M. K. Morse
Campbell


Displaying: 1 - 8 of 8 Matching Items
8 Items
View:
Active Filters :
closeout
Part #:507665
CLOSEOUTS Only 4 Left!
5/8" Clevis Grab Hook, Forged Steel, Self Colored Material is Drop-Forged Carbon Steel (Grade 30 &amp 43) or Heat-Treated Alloy Steel Grade 30 &amp 43 Hooks Available Self-Colored or Zinc-Plated Alloy Hooks Are Painted Orange and Stamped &rdquoAlloy&rdquo 3.5 to 1 Design Factor Alloy Hook Sizes 1/4" to 3/8" are Supplied Individually Bagged and Unassembled Self-Colored Finish Hooks Are Bulk Packed, Zinc Plated Hooks Are Packed 10 Per Box Grab Hooks Are Designed to Grab a Chain Link and Hold it in Place Hooks are Sized by the Material Diameter of the Chain That They Engage. Make Sure the Hook Size and Chain Diameter are Compatible Before Attaching to Load DO NOT EXCEED THE WORKING LOAD LIMIT
$67.30 MSRP $ 38.42
Qty:
add to cart
Part #:811252
5/16" - 3/8" Load Binder, Ratchet Type, Painted Red, Imported To Tighten Chain, Typically for Cargo Securement Meets U.S. D.O.T. 393.100 -393.102 Requirements for Use with Chain Lever Type Allows for Quicker Application of Load Ratchet Type Allows for Easier Adjustment of Tension and Greater Range of Take-Up DO NOT EXCEED THE WORKING LOAD LIMIT Do Not Use for Overhead Lifting or Hoisting
$134.76 MSRP $ 79.13
Qty:
add to cart
closeout
Part #:511872
CLOSEOUTS Only 8 Left!
3/8" Connecting Link, Forged Carbon Steel, Self Colored, 10 Pcs per Box Drop-Forged Heat-Treated Carbon or Alloy Steel Standard Finish is Self-Colored or Galvanized to Meet ASTM A-153 Specifications 4 to 1 Design Factor For Proper Closure, Peen the Prongs to Fill the Hole of the Mating Half as Much as Possible Meets Design Requirements of Federal Specification RR-C-271D, Type II Make Sure the Connecting Link Used is the Same Size as the Components Being Joined. e.g., a 3/8 in. Connecting Link is Used with 3/8 in. Chain Any Assembly Made Using Connecting Links Should be Rated at the Working Load Limit of the Weakest Component. The Working Load Limit of Connecting Links is Based on a Straight Line Pull. Any Side or Shock Loading Will Significantly Reduce the Actual Working Load Limit. NEVER Re-Use a Connecting Link DO NOT EXCEED THE WORKING LOAD LIMIT
$18.88 MSRP $ 11.08
Qty:
add to cart
closeout
Part #:511874
CLOSEOUTS Only 8 Left!
1/2" Connecting Link, Forged Carbon Steel, Self Colored, 10 Pcs per Box Drop-Forged Heat-Treated Carbon or Alloy Steel Standard Finish is Self-Colored or Galvanized to Meet ASTM A-153 Specifications 4 to 1 Design Factor For Proper Closure, Peen the Prongs to Fill the Hole of the Mating Half as Much as Possible Meets Design Requirements of Federal Specification RR-C-271D, Type II Make Sure the Connecting Link Used is the Same Size as the Components Being Joined. e.g., a 3/8 in. Connecting Link is Used with 3/8 in. Chain Any Assembly Made Using Connecting Links Should be Rated at the Working Load Limit of the Weakest Component. The Working Load Limit of Connecting Links is Based on a Straight Line Pull. Any Side or Shock Loading Will Significantly Reduce the Actual Working Load Limit. NEVER Re-Use a Connecting Link DO NOT EXCEED THE WORKING LOAD LIMIT
$26.26 MSRP $ 15.41
Qty:
add to cart
closeout
Part #:511876
CLOSEOUTS Only 19 Left!
5/8" Connecting Link, Forged Carbon Steel, Self Colored, 10 Pcs per Box Drop-Forged Heat-Treated Carbon or Alloy Steel Standard Finish is Self-Colored or Galvanized to Meet ASTM A-153 Specifications 4 to 1 Design Factor For Proper Closure, Peen the Prongs to Fill the Hole of the Mating Half as Much as Possible Meets Design Requirements of Federal Specification RR-C-271D, Type II Make Sure the Connecting Link Used is the Same Size as the Components Being Joined. e.g., a 3/8 in. Connecting Link is Used with 3/8 in. Chain Any Assembly Made Using Connecting Links Should be Rated at the Working Load Limit of the Weakest Component. The Working Load Limit of Connecting Links is Based on a Straight Line Pull. Any Side or Shock Loading Will Significantly Reduce the Actual Working Load Limit. NEVER Re-Use a Connecting Link DO NOT EXCEED THE WORKING LOAD LIMIT
$37.18 MSRP $ 21.82
Qty:
add to cart
closeout
Part #:511863
CLOSEOUTS Only 10 Left!
5/16" Clevis Grab Hook, Forged Steel, Self Colored(Discontinued being replaced with T9501524) Material is Drop-Forged Carbon Steel (Grade 30 &amp 43) or Heat-Treated Alloy Steel Grade 30 &amp 43 Hooks Available Self-Colored or Zinc-Plated Alloy Hooks Are Painted Orange and Stamped &rdquoAlloy&rdquo 3.5 to 1 Design Factor Alloy Hook Sizes 1/4" to 3/8" are Supplied Individually Bagged and Unassembled Self-Colored Finish Hooks Are Bulk Packed, Zinc Plated Hooks Are Packed 10 Per Box Grab Hooks Are Designed to Grab a Chain Link and Hold it in Place Hooks are Sized by the Material Diameter of the Chain That They Engage. Make Sure the Hook Size and Chain Diameter are Compatible Before Attaching to Load DO NOT EXCEED THE WORKING LOAD LIMIT
$11.53 MSRP $ 6.75
Qty:
add to cart
closeout
Part #:511870
CLOSEOUTS Only 13 Left!
1/4" Connecting Link, Forged Carbon Steel, Self Colored, 10 Pcs per Box Drop-Forged Heat-Treated Carbon or Alloy Steel Standard Finish is Self-Colored or Galvanized to Meet ASTM A-153 Specifications 4 to 1 Design Factor For Proper Closure, Peen the Prongs to Fill the Hole of the Mating Half as Much as Possible Meets Design Requirements of Federal Specification RR-C-271D, Type II Make Sure the Connecting Link Used is the Same Size as the Components Being Joined. e.g., a 3/8 in. Connecting Link is Used with 3/8 in. Chain Any Assembly Made Using Connecting Links Should be Rated at the Working Load Limit of the Weakest Component. The Working Load Limit of Connecting Links is Based on a Straight Line Pull. Any Side or Shock Loading Will Significantly Reduce the Actual Working Load Limit. NEVER Re-Use a Connecting Link DO NOT EXCEED THE WORKING LOAD LIMIT
$16.52 MSRP $ 9.70
Qty:
add to cart
closeout
Part #:511871
CLOSEOUTS Only 7 Left!
5/16" Connecting Link, Forged Carbon Steel, Self Colored, 10 Pcs per Box Drop-Forged Heat-Treated Carbon or Alloy Steel Standard Finish is Self-Colored or Galvanized to Meet ASTM A-153 Specifications 4 to 1 Design Factor For Proper Closure, Peen the Prongs to Fill the Hole of the Mating Half as Much as Possible Meets Design Requirements of Federal Specification RR-C-271D, Type II Make Sure the Connecting Link Used is the Same Size as the Components Being Joined. e.g., a 3/8 in. Connecting Link is Used with 3/8 in. Chain Any Assembly Made Using Connecting Links Should be Rated at the Working Load Limit of the Weakest Component. The Working Load Limit of Connecting Links is Based on a Straight Line Pull. Any Side or Shock Loading Will Significantly Reduce the Actual Working Load Limit. NEVER Re-Use a Connecting Link DO NOT EXCEED THE WORKING LOAD LIMIT
$17.42 MSRP $ 10.22
Qty:
add to cart
 
Displaying: 1 - 8 of 8 Matching Items