Fluke
Cantex
View:
Active Filters :
Part #:301615
- Key features
DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
Right angle connector on one end and straight connector on the other
Reinforced strain relief
1.5 meter silicone-insulated wire resists heat & cold
CAT IV 600 V, CAT III 1000 V, 10 A rating. CSA listed
One year warranty
$
53.33
Qty:
Part #:304993
- Key features
AC220 SureGrip&trade Alligator Clip Set
TP1 Slim-Reach&trade Test Probes (flat bladed)
TL224 SureGrip&trade Silicone Test Lead Set (straight to right)
One year warranty
$
121.58
Qty:
Part #:306993
- Key features
&ldquoThis meter is perfect for my use as I do HVAC and Electrical work and this will give me what I need for troubleshooting and performance of equipment.&rdquo - Paul
Automatically measure AC and DC voltage up to 600 V with precise digital resolution
Measure current up to 100 A without breaking the circuit with OpenJaw&trade design
Troubleshoot resistance problems up to 1000 &Omega
Work in tight spaces with detachable Slim Reach probe tips
$
196.02
Qty:
Part #:307265
- Key features
Digital multimeter designed specifically for HVAC professionals
Includes built-in thermometer to measure temperature from -40°C to 400°C (-40°F to 752°F)
Provides microamps to test flame sensors
Features low input impedance to helps prevent false readings due to ghost voltage
Presents a large white LED backlight for working in poorly lit areas
Qty:
Part #:310204
- Key features
Ultimate troubleshooting tool for electricians and instrumentation professionals
Combines the functionality of a loop calibrator with the power of a precision 1000 V, 440 mA True-RMS digital multimeter
Optional IR3000FC module for wireless data logging capabilities via Fluke Connect® mobile App
Includes 24 V loop power supply
Features a very large dual display with enhanced two-level backlight brightness settings
Qty:
Qty:
Qty:
Qty:
Part #:303473
- Key features
Durable ribbon sensor
Measurement range -127 to 600 °C
One year warranty
$
374.61
Qty:
Qty:
Part #:300016
- Description CANTEX 5133736 is a 1/2 in. Conduit Clamp / Strap which is a U-shaped conduit support used to anchor conduit to interior or exterior surfaces Features Two holes in the feet of the clamp allow mounting the screws or nails Durable non-conductive PVC will not rust or corrode For use with Schedule 40 & 80 conduit UL and CSA listed Made in USA Requires two #10 screws for installation (not included)
$
0.22
Qty:
Part #:300994
-
Previous
Key features
One pair (red, black) of nickel plated pincers open to 5 mm
11.4 cm flexible insulated shaft
Recommended for use with TL222 and TL224 test leads
CSA listed
One year warranty
Next
Key features
One pair (red, black) of nickel plated pincers open to 5 mm
11.4 cm flexible insulated shaft
Recommended for use with TL222 and TL224 test leads
CSA listed
One year warranty
$
69.15
Qty:
Part #:300995
- Key features
SureGrip&trade AC285 has rubber overmolded surfaces for a firm reliable grip
Multi-purpose tooth pattern grips anything from fine gauge wire to a 20 mm (0.75 in) nut
Strong, nickel-plated steel jaws for a tight hold
Conforms to safety standard IEC61010-0312002 +A12008, CAT III 1000 V, CAT IV 600 V
10 A maximum, pollution degree 2, 2000 m altitude
Operating temperature -20 °C to 55 °C (-4 °F to 131 °F), 95% RH
One-year warranty
Qty:
Part #:300997
- Key features
Single probe pierces 0.25 to 1.5 mm insulated wire
Small pin allows self-healing of the insulation
1000 V, 10 A maximum
One year warranty
Qty:
Part #:301012
- Key features
Zippered polyester carrying case with padding and inside pocket.
Dimensions 218 x 128 x 64 mm (8.6 x 5 x 2.52 in)
Recommended for 11x series, 87v, 32x series, and most mid-sized DMMs
&ldquo...ample room for the quick reference card, the meter, and the leads (...) the material quality and construction should take abuse while protecting your expensive meter&rdquo- Jabit, verified customer
$
58.08
Qty:
Part #:301084
- Key features
Zippered carrying case with inside pocket belt loop and inside meter strap
One year warranty
Qty:
Part #:301182
- Key features
Zippered carrying case with inside pocket and belt loop
One year warranty
Qty:
Part #:301272
- CANTEX 6141625 is a 1 in. Schedule 40 Standard Center Stop Coupling used to join lengths of conduit pipe together with two solvent weld socket ends
Features
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Center stop to help determine proper depth of connection
For use aboveground and underground and non-conductive and sunlight resistant
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
0.21
Qty:
Part #:301354
- CANTEX 6141630 is a 3 in. Schedule 40 Standard Center Stop Coupling used to join lengths of conduit pipe together with two solvent weld socket ends
Features
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Center stop to help determine proper depth of connection
For use aboveground and underground and non-conductive and sunlight resistant
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
1.43
Qty:
Part #:301356
- CANTEX 6141632 is a 4 in. Schedule 40 Standard Center Stop Coupling used to join lengths of conduit pipe together with two solvent weld socket ends
Features
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Center stop to help determine proper depth of connection
For use aboveground and underground and non-conductive and sunlight resistant
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
4.62
Qty:
closeout
$
199.00
Qty:
Part #:301402
- CANTEX 5140112 is a 4 in. Male Terminal Adapter which is a connector used to transition from a spigot end PVC conduit to a threaded metal or PVC plastic female bell end
Features
Durable non-conductive PVC will not rust or corrode
For use with Schedule 40 and Schedule 80 conduit. May also be used in EB & DB Duct applications.
Meets NEMA TC-3 Standards
UL and CSA listed
Made in USA
$
3.02
Qty:
Displaying: 1 - 24 of 255 Matching Items