Greenlee
Cantex
View:
Active Filters :
- Brand: Cantex Greenlee Milwaukee Penn-Union Watts
Part #:601462
- Features&bull High flow and high sensitivity&bull Constant bleed option for semi-precisionapplications&bull Can be used for water service(non-relieving)&bull Unbalanced poppet standard&bull Diaphragm operated for fast response&bull Non-rising adjusting knob&bull Stainless steel version available(see stainless steel section of catalog)&bull High flow 10 SCFM§ (Air)1.25 GPM (Water)
$
39.23
Qty:
Part #:601925
- Features&bull Excellent water removal efficiency&bull For heavy duty applications withminimum pressure drop requirement&bull Unique deflector plate that createsswirling of the air stream ensuringmaximum water and dirt separation&bull Large filter element surfaceguarantees low pressure drop andincreased element life&bull 40 micron filter element standard,5 micron available&bull Metal bowl with sight gauge standard&bull Twist drain as standard, optionalauto drain&bull Large bowl capacity&bull Optional high capacity bowl(s) available&bull High flow1" &ndash 300 SCFM
$
241.96
Qty:
Part #:601950
- Features&bull High flow performance featuringrugged design for the mostdemanding applications&bull Ideal for those installations calling forconstant pressure with wide variationin flow&bull Diaphragm operated design withbalanced poppet design for quickand accurate regulation&bull Secondary aspiration plus balancedpoppet provides quick responseand accurate pressure regulation&bull Heavy duty tee handle adjustment&bull Reverse flow version available&bull Panel mount version available&bull High flow 1/4" &ndash 100 SCFM§
$
101.08
Qty:
Part #:601951
- Features&bull High flow performance featuringrugged design for the mostdemanding applications&bull Ideal for those installations calling forconstant pressure with wide variationin flow&bull Diaphragm operated design withbalanced poppet design for quickand accurate regulation&bull Secondary aspiration plus balancedpoppet provides quick responseand accurate pressure regulation&bull Heavy duty tee handle adjustment&bull Reverse flow version available&bull Panel mount version available&bull High flow3/8" &ndash 110 SCFM§
$
101.08
Qty:
Part #:601955
- Features&bull High flow performance featuringrugged design for the mostdemanding applications&bull Ideal for those installations calling forconstant pressure with wide variationin flow&bull Diaphragm operated design withbalanced poppet design for quickand accurate regulation&bull Secondary aspiration plus balancedpoppet provides quick responseand accurate pressure regulation&bull Heavy duty tee handle adjustment&bull Reverse flow version available&bull Panel mount version available&bull High flow 1/2" &ndash 150 SCFM§
$
120.39
Qty:
Part #:601964
- Features&bull High flow performance featuringrugged design for the mostdemanding applications&bull Ideal for those installations calling forconstant pressure with wide variationin flow&bull Diaphragm operated design withbalanced poppet design for quick andaccurate regulation&bull Secondary aspiration plus balancedpoppet provides quick response andaccurate pressure regulation&bull Heavy duty tee handle adjustment&bull Reverse flow version available&bull High flow1" 400 SCFM
$
190.54
Qty:
Part #:602637
-
This 1/2 inch process steam pressure regulator is designed for autoclaves, steam tables/irons, vulcanizers and single radiators. It is also used on sterilizers, process lines, testing fixtures and oil lines. It is highly sensitive to reduced pressure changes, and carries full volume with minimum pressure drop. It features an iron body with NPT threaded female inlet and outlet connections, with initial pressure up to 200 psi and adjusting spring for reduced pressure range of 3 to 15 psi (0.21 to 1.0 bar).
Product Features
NPT threaded female inlet and outlet connections
Iron body
Serviceable in line
Stainless steel disc
Qty:
Part #:602640
-
This 1/2 inch process steam pressure regulator is designed for autoclaves, steam tables/irons, vulcanizers and single radiators. It is also used on sterilizers, process lines, testing fixtures and oil lines. It is highly sensitive to reduced pressure changes, and carries full volume with minimum pressure drop. It features an iron body with NPT threaded female inlet and outlet connections, with initial pressure up to 200 psi and adjusting spring for reduced pressure range of 3 to 15 psi (0.21 to 1.0 bar).
Product Features
NPT threaded female inlet and outlet connections
Iron body
Serviceable in line
Stainless steel disc
Qty:
Part #:602641
-
This 1/2 inch process steam pressure regulator is designed for autoclaves, steam tables/irons, vulcanizers and single radiators. It is also used on sterilizers, process lines, testing fixtures and oil lines. It is highly sensitive to reduced pressure changes, and carries full volume with minimum pressure drop. It features an iron body with NPT threaded female inlet and outlet connections, with initial pressure up to 200 psi and adjusting spring for reduced pressure range of 30 to 140 psi (2.1 to 9.7 bar).
Product Features
NPT threaded female inlet and outlet connections
Stainless steel disc
Iron body
Serviceable in line
Qty:
Part #:602642
-
This 3/4 inch process steam pressure regulator is designed for autoclaves, steam tables/irons, vulcanizers and single radiators. It is also used on sterilizers, process lines, testing fixtures and oil lines. It is highly sensitive to reduced pressure changes, and carries full volume with minimum pressure drop. It features an iron body with NPT threaded female inlet and outlet connections, with initial pressure up to 200 psi and adjusting spring for reduced pressure range of 3 to 15 psi (0.21 to 1.0 bar).
Product Features
NPT threaded female inlet and outlet connections
Stainless steel disc
Serviceable in line
Iron body
Qty:
Part #:602644
-
This 3/4 inch process steam pressure regulator is designed for autoclaves, steam tables/irons, vulcanizers and single radiators. It is also used on sterilizers, process lines, testing fixtures and oil lines. It is highly sensitive to reduced pressure changes, and carries full volume with minimum pressure drop. It features an iron body with NPT threaded female inlet and outlet connections, with initial pressure up to 200 psi and adjusting spring for reduced pressure range of 30 to 140 psi (2.1 to 9.7 bar).
Product Features
NPT threaded female inlet and outlet connections
Stainless steel disc
Iron body
Serviceable in line
Qty:
Qty:
Qty:
Qty:
Part #:600443
-
This kit includes parts necessary to repair a 3/4 inch steam pressure regulator, series 152A. It contains stem and bushing assembly, diaphragm, diaphragm gasket, bottom plug gasket, bottom spring, strainer, disc and seat.
Product Features
Diaphragm gasket to seal
Stainless steel strainer
All parts are made of high quality materials
No special tools required
Qty:
Part #:500594
- 1-1/8" Step Bit (#9)
Durable split-point tip for fast, accurate material penetration.
Patented split-step design optimizes chip load for fast, smooth cutting, and more holes per charge.
Progressive cutting edges provides power tool accessory balanced aggression to maximize torque efficiency and minimize stalling.
Improved double flute design for superior chip evacuation, cutting speeds and tool life.
Three-flat shank for all 1/2" drill chucks
Laser markings for quick, easy product and size identification.
Replaced 30008
Also available for sale in a carton, qty. 25 (Cat # GSB09-B UPC # 783310082071)
Qty:
Part #:500536
- 1/2" Step Bit (#1)
Durable split-point tip for fast, accurate material penetration.
Patented split-step design optimizes chip load for fast, smooth cutting, and more holes per charge.
Progressive cutting edges provide balanced aggression to maximize torque efficiency and minimize stalling.
Improved double flute design for superior chip evacuation, cutting speeds and tool life.
Three-flat shank for all 1/2&rdquo drill chucks.
Laser markings for quick, easy product and size identification.
Replaced 34401
Also available for sale in a carton, qty. 25 (Cat # GSB01-B UPC # 783310082057)
Qty:
Part #:500574
- 7/8" Step Bit (#4)
Durable split-point tip for fast, accurate material penetration.
Patented split-step design optimizes chip load for fast, smooth cutting, and more holes per charge.
Progressive cutting edges provides power tool accessory balanced aggression to maximize torque efficiency and minimize stalling.
Improved double flute design for superior chip evacuation, cutting speeds and tool life.
Three-flat shank for all 1/2&rdquo drill chucks.
Laser markings for quick, easy product and size identification.
Replaced 34403
Also available for sale in a carton, qty. 25 (Cat # GSB04-B UPC # 783310082040)
Qty:
Part #:521244
- Extended DTAP Kit
Complete hole drilling, tapping and deburring/countersinking in one operation using power drill to save time and labor
Back tapered beyond tap to prevent thread damage from over-drilling
Made from hardened high-speed steel versus carbon-steel for longer life
High wuality hex shank to ensure strong connection to drill chuck
Designed to tap up to 10 gauge metal
Quick change adaptor included
Qty:
Part #:506147
- Hand-Held Cable Cutter
Easily cuts heavier copper and aluminum cables up to 2/0 (70 mm²)
Precision-ground, shear-action, curved cutting blades
727 has PVC-covered, high-leverage handles for easier cuts
Heat-treated for long life
Made of heavy-duty forged steel
Rust-resistant black oxide finish
Qty:
Part #:510307
- 240' Steel Fish Tape
Oil-tempered spring steel for excellent fishing performance
Dirt-free tape finish keeps hands cleaner during use
Advanced comfort handle grip reduces fatigue
Superior rapid tape pay-out and rewind
Smaller Fish Eye with offset bend for improved fishing ability
Improved low profile tip for easy fishing through all sizes of conduit
Viewing Port gives visibility to remaining tape and ability to remove jobsite debris quickly
Rugged case design improves drop impact capability
Flared case with Grip Ridges for no slip handling
Fish tape is available in 50 FT (15
2 m), 65 FT (19
8 m), 125 FT (38
1 m) and 240 FT (73
2 m) lengths
1/8 IN, 1/4 IN and flat steel profiles to accommodate different fishing situations
Qty:
Part #:300012
- CEB-2 - Bronze Ground Rod Clamp
Economy Clamp
Made from corrosion resistant cast aluminum bronze
Furnished with silicon bronze hexagon head bolt
For tin-plating suffix catalog number with "-TN"
ConductorType
Conductor Range
Wire Diameter (in.)
Copper
8 Sol. - 2 Str.
.128 - .292
Accommodates
5/8" (Rod)
Additional Details
UL Listing
UL 467 Listed Suitable for Direct Burial C & US
RUS ACCCEPTED
Yes (plain & tin plated)
Qty:
Part #:300016
- Description CANTEX 5133736 is a 1/2 in. Conduit Clamp / Strap which is a U-shaped conduit support used to anchor conduit to interior or exterior surfaces Features Two holes in the feet of the clamp allow mounting the screws or nails Durable non-conductive PVC will not rust or corrode For use with Schedule 40 & 80 conduit UL and CSA listed Made in USA Requires two #10 screws for installation (not included)
$
0.22
Qty:
Part #:301027
- LA-250 - Aluminum Solderless Lug
One hole, front entrance
For copper or aluminum conductor
Body fabricated from high strength aluminum alloy extrusion
Lug is 100% reusable using hex wrench
No special tools required
Maximum conductivity, compact design, light weight with ultimate strength
Electro-tin plated to assure minimum contact resistance and protection aginst corrosion when used with copper wire
For added protection apply Penn-Union Cual-Aid® to cable before installation
ConductorType
Conductor Range
Aluminum or Copper
6 - 250 MCM
Qty:
Displaying: 1 - 24 of 296 Matching Items