Imark/edn Milwaukee Electric
Carborundum
View:
Active Filters :
Part #:304331
- 20A Double Pole, Double Throw Switch, Brown
Oversize silver alloy contacts for long life and better heat dissipation.
Side wired terminals accept #14 - #10 AWG copper or copper-clad conductors.
Fiber terminal insulation barriers standard.
Can be mounted in standard device boxes or in NEMA 1 sheet steel enclosures.
Bodies, covers, and toggles molded of durable nylon.
Single Pole-Double Throw and Double Pole-Double Throw.
Locking Switches supplied with one 1498-NT key.
Normally open.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
CSA File Number 17949
Qty:
Part #:304966
- Extremely durable for hard-use institutional applications. Spring-loaded covers close automatically when plugs are removed. Die-cast copper-free aluminum construction. Stainless steel springs. Screws and spring covers are chrome-plated brass. Baked-on lacquer finish. Heavy rubber gaskets provide positive seal. All covers below are for 4 screw mounting only. Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
$
12.35
Qty:
closeout
$94.22 MSRP
$
50.21
Part #:308114
- CLOSEOUTS Only 3 Left!
- In-Line Portable 15A GFCI, Manual Reset
In-line portable GFCI interrupter
Qty:
Part #:308442
- 60A Power Interrupting Receptacle, Diecast with Lift Lid Enclosure
$
964.68
Qty:
Part #:500305
-
Soft and comfortable.
Fully attach ear canal.
Good noise canceling.
Sound attenuation data according to ANSI S3.19-1974 standards.
The NRR calculated from these laboratory-based attenuation data is 33 decibels (db).
Qty:
Part #:504775
- The KAMORI&trade RWG52 Cut Protection Work Glove by Radians has an ANSI Cut rating of A4 and an EN388 cut rating of 5. The white grain goat skin glove with an Aramid lining provides excellent cut protection.
White grain goat skin driver with Aramid lining
Slip-on cuff design and keystone thumb provide a comfortable fit.
Load weight of 1851g
Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (3 5 2 3).
ANSI Cut Level A4, EN388 Cut Level 5.
Qty:
Part #:504778
- The KAMORI&trade RWG52 Cut Protection Work Glove by Radians has an ANSI Cut rating of A4 and an EN388 cut rating of 5. The white grain goat skin glove with an Aramid lining provides excellent cut protection.
White grain goat skin driver with Aramid lining
Slip-on cuff design and keystone thumb provide a comfortable fit.
Load weight of 1851g
Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (3 5 2 3).
ANSI Cut Level A4, EN388 Cut Level 5.
Qty:
Part #:507472
- Carborundum Aluminum Oxide Resin Cloth Sheets, Aluminum Oxide Cloth, P240
Product DetailsSuperior conformability to complex surfaces and better finishes
Qty:
Part #:510041
- Radians Granite&trade Cap Style Hard Hats are comfortable and stylish, offering versatile protection. All Hard Hats Meet ANSI Z89.1-2014 Type 1 &ndash Class G & E Standards.
Features
Pillowed Brow Pad.
Nylon Crown Strap Suspensions.
Vertical Height Adjustment.
Quick Ratchet Adjustment System.
Easy Pinlock Adjustment System.
High Density Polyethylene Construction.
Universal Accessory Slots.
All Hard Hats Meet ANSI Z89.1-2014 Type 1 &ndash Class G & E Standards.
Made in the USA.
Qty:
Part #:510556
- Specifications Case Qty:
- 12 per box | 300 per case Case Weight
Qty:
Part #:512251
-
Radians SJ11QB Class 3 weather proof Bomber Jacket with a quilted liner makes it very easy to slip on and off over other fleece or other warm outwear.
Quilted Liner 160g/m2
Color blocked bottom
2" silver reflective tape
PU coated weather proof 300D oxford polyester shell
Concealed attached hood
Elastic waistband and cuffs
Zippered, lined slash pockets
3D flap covered cell phone / radio chest pocket
Two lower zipper closure lined pockets
One inside open chest pocket
Mic tabs on both shoulders.
Qty:
Part #:512262
Qty:
Part #:521546
- This popular style comes in a variety of different polycarbonate lenses to fit your application.
Lightweight, rimless design provides all day user comfort
Thin, flexible temples provide a secure fit without uncomfortable pressure points
Molded nose bridge design to fit the vast majority of users
9.5 Base curve lens
Meets ANSI Z87.1+
Part #:521547
- Radians Mirage RT&trade Safety Eyewear offers a sleek design which allows for a perfect fit. Rubber tipped temples keep safety glasses secure. The Mirage&trade family of safety eyewear is available in several styles, including rubber temples, foam lined and small sizes for all your safety glass needs.
Part #:800672
- The Neese Economy Series is basic rain wear to keep on hand for emergency weather conditions, and is made of durable water resistant PVC over polyester. The Economy Rain Coat is 48" in length and has a stand up collar and detachable hood.
PVC (.35mm) on Polyester
Stand-up collar with snaps and detachable hood
Raglan shoulder design with underarm vents
Vented upper back
Snap front closure
Lower front left and right side slash pockets
Coat is minimum of 48&rdquo long
Qty:
Part #:501754
- Silicon Carbide Paper Sheets Better Tier / Silicon Carbide Resin Waterproof Paper
Exceptional finishing in wet applications.
BF 0416 W
Qty:
Part #:501742
- Silicon Carbide Paper Sheets Good Tier / Silicon Carbide Resin Waterproof Paper
May be used wet or dry on plastic or painted surfaces. Best results are obtained when used wet.Excellent for machine and hand rubbing of lacquer, urethane and varathane between coats. Ideal forobtaining fine finishes and feather-edging painted surfaces.
Qty:
Part #:201554
- Barricade Safety Tapes 2 Mil Caution Tape 3" Wide x 1,000ft
&bull Rolls are individually labeled with UPC code&bull 2" Black characters on 3" wide yellow tape unless indicated.&bull Ask us about other legends and sizes available&bull Boxed packaging
Qty:
closeout
Part #:507581
- CLOSEOUTS Only 1 Left!
- Aluminum Oxide Cloth Rolls Good Tier / Aluminum Oxide Resin Cloth Ideal for cleaning and deburring metal surfaces. May be used dry or with oil.
JCF 0852
$
28.32
Qty:
Part #:220175
- Flat Boring Bit 6" Universal Set - 8PC
Get added convenience and reach with the Milwaukee® 8-Piece 6" Universal QUIK-LOK&trade Flat Boring Bit Set. Bore small, clean holes at any angle in a variety of materials. The double wing spurs provide easy hole formation while reducing vibration and preventing "break out." The patented cutting edge produces easier and faster wood boring and fast chip removal, allowing heat from the bit to dissipate. The Universal QUIK-LOK&trade allows quick and easy accessory changes, as well as added reach in hard-to-work areas. The kit includes 3/8", 1/2", 5/8", 3/4", 7/8", 1" and 1-1/8" bits plus a 6" QUIK-LOK Extension in a carrying case.
Qty:
Part #:805360
- 12" 10/14 TPI SAWZALL® Blades (5 Pk)
Milwaukee® designs and manufactures SAWZALL® blades for the toughest professional applications. Material, blade geometry and heat treating are designed to maximize general purpose cutting performance.
Qty:
Part #:729-48-00-8712
- 6" 10 TPI The Torch&trade SAWZALL® Blades (25 Pk)
The Torch&trade metal-cutting blades with the Double Duty Upgrade&trade feature a tooth form optimized for the longest life and maximum durability. Tough Neck&trade is engineered to protect against tang breakage and delivers the strongest SAWZALL® blade tang on the market. Grid Iron&trade features a stamped honeycomb pattern throughout the body of the blade that greatly increases the rigidity of the blade, making it the stiffest metal cutting SAWZALL® blade on the market. These blades are ideal for making tough, straight cuts.
Qty:
Part #:729-2759-22
- M18 FUEL&trade with ONE-KEY&trade 1/2" Compact Impact Wrench w/ Pin Detent Kit (Discontinued, Replaced by 2759-20)
The M18 FUEL&trade 1/2&rdquo Compact Impact Wrench is the Most Powerful tool in its class, delivering up to 220 ft-lbs of torque in a compact design. The POWERSTATE&trade Brushless Motor not only provides unmatched power, but also greater efficiency, delivering up to 25% more run-time than the leading competitors. REDLINK PLUS&trade Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. REDLITHIUM&trade Batteries deliver more work per charge and more work over the life of the pack than competitive batteries on the market.Compatible with ONE-KEY&trade, this is the industry&rsquos first Impact Wrench that wirelessly connects to a smart phone to Customize, Track and Manage a tool&rsquos performance and location. Unlimited Tool Customization allows you to connect to the tool and access predetermined set-ups for specific fasteners and materials, or have complete control over output speed and power for the specific application at hand. Once the desired output performance is reached, the custom profile is then saved to the memory of the tool and the connection to the smart phone is no longer necessary. The tool&rsquos memory supports up to 4 custom profiles that can be easily accessed with the touch of a button on the tool. Your custom profiles are also saved in the cloud so that they can be accessed at any time. Integrated Tool Tracking, also available through ONE-KEY&trade, provides full visibility to how and where tools are being used across your network of jobs and users. The app will track all ONE-KEY&trade compatible devices within 100 ft range of your phone. By building the functionality into the tool, not the battery, all devices are trackable even if the battery is not charged or on the tool. The app will automatically keep records of the last time a tool was within range of the app, allowing you to pinpoint missing tools quicker and increase accountability of your crew. If you&rsquore having trouble locating a lost tool, expand your search with the help of anybody with the ONE-KEY&trade app. By opting in, when any phone with the app comes within 100 ft of your tool, you will receive an updated location
Qty:
closeout
$203.00 MSRP
$
144.21
Part #:507361
- Availability: Will be backordered (Typically arrives in 10 days)
- 7.5 Amp 4-1/2" Small Angle Grinder (Discontinued, Being Replaced by 6141-30)
The 6140-30 4-1/2" 7.5 Amp Small Angle Grinder delivers performance, durability and ease-of-use features for industrial users. The X-large paddle switch with lock-on provides increased comfort and ease-of use when operating the grinder in various positions. Milwaukee's built in advanced airflow system, including Debris Baffles and Multi-Port Exhaust, extends tool life. 25% longer lasting epoxy motor protection extends tool life by protecting the copper wires from abrasion. The tool-free burst resistant guard allows the user to quickly adjust the guard without the use of a tool.
Qty:
Displaying: 1 - 24 of 797 Matching Items