Dixon Valve & Coupling Company
Carlon


Displaying: 1 - 24 of 835 Matching Items
835 Items
View:
Part #:100183
Clear PVC Tubing Attributes Tube OD 3/4" Weight 14.5 lb Material PVC Tube ID 1/2" Color Clear Working Pressure 85 PSI @70&degF Length 100' Maximum Temperature 175&degF (79.4&degC)
$ 1.54
Qty:
add to cart
Part #:304383
$ 114.69
Qty:
add to cart
Part #:334-RC100EZCR-TEF-GASKET
Part Number RC100EZCR Material 316 Stainless Steel Seal Buna-N Size 1" (25mm) Maximum Operating Pressure 250 PSI Optional Pkg/Box Qty 10 Weight Lb 1.2000
$ 80.35
Qty:
add to cart
Part #:334-RD100EZ-TEF-GASKET
Part Number RD100EZ Material 316 Stainless Steel Seal Teflon Size 1" (25mm) Maximum Operating Pressure 250 PSI Optional Pkg/Box Qty 10 Weight Lb 1.1400
$ 77.99
Qty:
add to cart
Part #:334-RD200EZ-TEF-GASKET
Part Number RD200EZ Material 316 Stainless Steel Seal Buna-N Size 2" (50mm) Maximum Operating Pressure 250 PSI Optional Pkg/Box Qty 10 Weight Lb 2.3300
$ 108.10
Qty:
add to cart
Part #:334-SL075M
Surelock&trade Male NPT End Attributes Weight 0.52 lb Size 3/4" Material Iron Style Small Head Seal Natural Rubber Working Pressure 200 PSIG at 70&degF (21&degC)
$ 7.31
Qty:
add to cart
Part #:505934
Boss&reg Ground Joint Stem Attributes Weight 0.455 lb Size 3/4" (20 mm) Material Plated Steel
$ 12.85
Qty:
add to cart
Part #:511262
HDM Manual adhesive dispenser Manual dispenser HDM 500 + black cartr #3498241 Manual hybrid/epoxy adhesive anchor dispenser Dispenser typeManual
$ 292.49
Qty:
add to cart
Part #:511296
HIT-Z Anchor rod Anchor rod HIT-Z 5/8" x 9-1/2" #2018448Material, corrosionCarbon steel, zinc-platedWrench/nut size15/16 inDrill bit diameter3/4 inBase materialsConcrete (cracked), Concrete (uncracked)PROFIS SoftwareYesApprovals / Test reportsICC-ES report (concrete)Cleaning proceduresNon CleaningType of fixingPre-fastening, Through-fasteningProduct ClassUltimate
$ 122.54
Qty:
add to cart
BX
Part #:511332
HIT-RE 500 V3 Epoxy anchor Epoxy adh RE 500-V3 11.1oz/330ml #2123401 Base materialsConcrete (cracked), Concrete (uncracked)Base material conditionDry, Submerged, Water-filled, WetApprovals / Test reportsICC-ES report (concrete)Seismic loadingYesPROFIS SoftwareYesClean-TecNoCleaning proceduresAutomatic Cleaning (SafeSet Hollow Drill Bit), Compressed-Air CleaningStorage and transportation temperature range41 - 77 &degFIn-service temperature &ndash range-40 - 158 &degFShelf life from date of manufacture (at 73&degF/23&degC and 50% relative humidity)12 monthsProduct informationThis product is subject to the Chemicals Prohibition Ordinance (ChemVerbotsV). It is to be used by professionals within the scope of their work and, in accordance with &sect 8 para. 3 no. 1 of the ChemVerbotsV, is to be used exclusively for its intended purpose as anchor adhesive, for rebar connections (typically steel-to-concrete and/or concrete-to-concrete connections), as well as for other intended fastening and uses within the scope of construction activities. Purchasers must comply with all existing legal requirements for the use of these products and may use them only as permitted. Information in the safety data sheets and operating instructions on the use of these products, the hazards associated with their use, the necessary safety measures during intended use and in the event of unforeseen spillage or release, and proper disposal must always be observed. The operating instructions and safety data sheets can be accessed in the detailed view of the products concerned at www.hilti.de in a format that can be saved and printed, and the operating instructions are enclosed with the products. Safety instructions Wear protective gloves/protective clothing/eye protection/face protection. Do not get in eyes, on skin or on clothing. In case of contact with eyes rinse thoroughly with water for several minutes. Remove contact lenses if possible, continue rinsing. If eye irritation, skin irritation or rash persist seek medical advice/attention. In case of contact with skin wash with plenty of soap and water. Disposal Completely emptied cartridges can be disposed of via the Dual System (yellow garbage can). Full/partially emptied containers are to be disposed of as special waste.Product ClassUltimate
$ 81.77
Qty:
add to cart
Part #:511731
HDM Manual adhesive dispenser Manual dispenser HDM 500 + red cartr #3498242 Manual hybrid/epoxy adhesive anchor dispenser Dispenser typeManual
$ 292.49
Qty:
add to cart
Part #:511733
Black cartridge HIT-CB 500 #2007057
$ 44.92
Qty:
add to cart
Part #:511740
Cartridge holder red HIT-CR 500 #2007059
$ 45.81
Qty:
add to cart
Part #:800025
Dixon Cam &amp Groove Type A Adapter x Female NPT Attributes Maximum Operating Pressure 250 PSI Weight 1.26 lb Size 2" Material Plated Malleable Iron
$ 40.70
Qty:
add to cart
Part #:811312
Part Number 100GTFVI Material PTFE (TFE) with FKM-A Filler Color White / Black Color Code 1 yellow stripe Size 1" (25mm) Weight Lb 0.0200
$ 12.99
Qty:
add to cart
Part #:521536
In-Line Lubricator Attributes Maximum Operating Pressure 500 PSI at 70&degF (21&degC) Weight 0.88 lb Female Thread Size Metric 15mm Material Aluminum Capacity 1.4 fluid oz. oil (40ml) Female Thread NPT Flow 30 SCFM Female Thread Size 1/2"
$ 77.07
Qty:
add to cart
Part #:509605
Cast Iron Threaded Foot Valve Attributes Weight 15.52 lb Size 4" Material Painted Cast Iron Thread NPT
$ 106.03
Qty:
add to cart
Part #:521385
Dixon Hose Knife Attributes Weight 0.14 lb
$ 17.13
Qty:
add to cart
Part #:506560
Double Bolt Clamp Attributes Weight 0.9 lb Material Investment Cast Carbon Steel Torque 40 ft. lbs. Hose OD To 2-40/64" (66.7 mm) Hose OD From 2-20/64" (58.7 mm)
$ 10.66
Qty:
add to cart
Part #:800635
Boss-Lock Cam &amp Groove Type B Coupler x Male NPT Attributes Maximum Operating Pressure 100 PSI Weight 2.36 lb Size 4" Material 356T6 Aluminum Seal Buna-N
$ 89.96
Qty:
add to cart
Part #:510972
Boss-Lock Cam &amp Groove Type B Coupler x Male NPT Attributes Maximum Operating Pressure 250 PSI Weight 2.02 lb Size 2" Material Plated Malleable Iron Seal Buna-N
$ 62.24
Qty:
add to cart
Part #:800653
Boss-Lock Cam &amp Groove Type C Coupler x Hose Shank Attributes Maximum Operating Pressure 250 PSI Weight 1.13 lb Size 2" Material 356T6 Aluminum Seal Buna-N
$ 39.56
Qty:
add to cart
Part #:800674
Boss-Lock Cam &amp Groove Type C Coupler x Hose Shank Attributes Maximum Operating Pressure 125 PSI Weight 1.86 lb Size 3" Material 356T6 Aluminum Seal Buna-N
$ 76.41
Qty:
add to cart
Part #:507975
EZ Boss-Lock Cam &amp Groove Type D Coupler x Female NPT Attributes Maximum Operating Pressure 250 PSI Weight 1.14 lb Size 1" (25 mm) Material 316 Stainless Steel Seal Buna-N
$ 69.84
Qty:
add to cart
 
Displaying: 1 - 24 of 835 Matching Items