Cast Carbon Steel
Cast
View:
Active Filters :
- Material: Cast Cast Carbon Steel Leather
Part #:304966
- Extremely durable for hard-use institutional applications. Spring-loaded covers close automatically when plugs are removed. Die-cast copper-free aluminum construction. Stainless steel springs. Screws and spring covers are chrome-plated brass. Baked-on lacquer finish. Heavy rubber gaskets provide positive seal. All covers below are for 4 screw mounting only. Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
$
12.35
Qty:
Part #:503802
-
PIP® Superior Grade Split Cowhide Leather Welder's Glove with Cotton/Foam Lining and DuPont&trade Kevlar® Stitching
Side Split Cowhide leather construction provides comfort, durability, excellent abrasion resistance, and breathability
Side Split leather is durable and provides excellent protection due to its dense fibers
Fully welted to protect seams from abrasions
Stitched with Kevlar® adding strength and burn resistance
Cotton/foam lining gives welders additional heat protection but still absorbs moisture
One-piece back for extended glove life
Wing thumb increases comfort in open-handed work
Double reinforced palm and thumb strap increases durability and provides added protection at common wear points
Part #:506560
- Double Bolt Clamp Attributes
Weight
0.9 lb
Material
Investment Cast Carbon Steel
Torque
40 ft. lbs.
Hose OD To
2-40/64" (66.7 mm)
Hose OD From
2-20/64" (58.7 mm)
$
10.66
Qty:
Part #:506713
- Boss® Clamp 2 Bolt Type, 2 Gripping Fingers Attributes
Weight
0.74 lb
Material
Global Investment Cast Carbon Steel
Torque
21 ft. lbs.
Hose ID
3/4" (20 mm)
Hose OD To
1-20/64" (33.3 mm)
Hose OD From
1-10/64" (29.36 mm)
$
9.08
Qty:
Part #:303701
- One Gang Heavy Cast Aluminum Cover Duplex Receptacle Horizontal, Gray
Extremely durable for hard-use institutional applications.
Spring-loaded covers close automatically when plugs are removed.
Die-cast copper-free aluminum construction.
Stainless steel springs.
Screws and spring covers are chrome-plated brass.
Baked-on lacquer finish.
Heavy rubber gaskets provide positive seal.
All covers below are for 4 screw mounting only.
Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
CSA File Number 16807
Qty:
Part #:804337
- Boss® Clamp 2 Bolt Type, 2 Gripping Fingers Attributes
Weight
0.25 lb
Material
Global Investment Cast Carbon Steel
Torque
6 ft. lbs.
Hose ID
3/8" (9.5 mm)
Hose OD To
56/64" (22.3 mm)
Hose OD From
44/64" (17.46 mm)
$
7.17
Qty:
Part #:804295
- Boss® Clamp 2 Bolt Type, 2 Gripping Fingers Attributes
Weight
0.42 lb
Material
Global Investment Cast Carbon Steel
Torque
12 ft. lbs.
Hose ID
1/2" (15 mm)
Hose OD To
1-4/64" (27.0 mm)
Hose OD From
60/64" (23.8 mm)
$
7.41
Qty:
Part #:300310
- Single Gang Cast While-In-Use Cover, Gray
Compliant with National Electric Code (NEC) Section 406.8(B)(1) for wet locations.
UL listed for ''Extra-Duty'' applications.
Heavy cast aluminum construction.
Corner hinge allows for vertical or horizontal mounting.
Device inserts allow for multiple device types.
Install without removing electrical device thanks to keyed mounting holes.
Cord flap gaskets inhibit water splash and insects, all gaskets are factory installed.
Accepts padlocks.
Qty:
Part #:804296
- Boss® Clamp 2 Bolt Type, 2 Gripping Fingers Attributes
Weight
0.75 lb
Material
Zinc Plated Iron
Torque
21 ft. lbs.
Hose ID
3/4" (20 mm)
Hose OD To
1-32/64" (38.1 mm)
Hose OD From
1-20/64" (33.3 mm)
$
11.27
Qty:
Part #:302593
- One Gang Heavy Cast Aluminum Cover Decorator/GFCI Horizontal, Gray
Extremely durable for hard-use institutional applications.
Spring-loaded covers close automatically when plugs are removed.
Die-cast copper-free aluminum construction.
Stainless steel springs.
Screws and spring covers are chrome-plated brass.
Baked-on lacquer finish.
Heavy rubber gaskets provide positive seal.
All covers below are for 4 screw mounting only.
Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
CSA File Number 16807
Qty:
Part #:302594
- One Gang Heavy Cast Aluminum Cover Decorator/GFCI Vertical, Gray
Extremely durable for hard-use institutional applications.
Spring-loaded covers close automatically when plugs are removed.
Die-cast copper-free aluminum construction.
Stainless steel springs.
Screws and spring covers are chrome-plated brass.
Baked-on lacquer finish.
Heavy rubber gaskets provide positive seal.
All covers below are for 4 screw mounting only.
Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
CSA File Number 16807
Qty:
Part #:303252
- Cast Weatherproof Two Gang Cover, Gray
Broad line of two gang covers for switches, receptacles, GFCIs, and power outlets.
Baked-on electrostatic, polyester, powder paint for superior scratch and corrosion resistance.
Heavy-duty die-cast zinc.
Stainless steel springs.
All covers have 2 self-closing lids.
Covers comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
Qty:
Part #:303216
- Cast Weatherproof Cover Single Pole Toggle Switch, Gray
Broad line of single gang covers for switches and GFCIs.
Baked-on electrostatic, polyester, powder paint for superior scratch and corrosion resistance.
Heavy-duty die-cast zinc.
Stainless steel springs.
Covers comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
Qty:
Part #:539-35-969
- Tuff-Tote&trade Tool Carrier, Premium Leather w/Strap
The Tuff-Tote® Tool Carrier comes with 4 center screwdriver slots, 2 interior compartments, 2 divided outside pockets, and 4 outside tool loops. Its unique stand-alone design keeps tools standing upright for easy identification and access. Tool carrier comes with removable should strap to help relieve lower back strain. It also has rust-resistant, plated-steel hardware and heavy, lock-stitched nylon thread for long term-durability, in addition to an oil and moisture-resistant reinforced bottom.
Lifetime warranty
$
292.78
Qty:
Displaying: 1 - 14 of 14 Matching Items