Concrete Vibrator
Caulking Gun
View:
Active Filters :
Part #:729-5446-21
- 1-3/4" SDS Max Demolition Hammer
Get best-in-class power and the highest overload protection for the toughest demolition jobs. The SDS-Max Demolition Hammer has a heavy-duty crank piston mechanism that delivers 8.8 ft-lbs of impact energy for hard-hitting performance in any concrete. For lighter applications, the two-speed impact mode allows you to reduce BPM to 2,200. Advanced Constant Power Technology electronics and a mechanical clutch enhance your control and the demolition hammer&rsquos long-term durability. The Anti-Vibration System and side D-handle ensure safe, comfortable use. The tool comes with a carrying case.
Qty:
Part #:729-2922-22
- M18&trade FORCE LOGIC&trade Press Tool w/ ONE-KEY&trade w/ 1/2"-2" CTS Jaws
Our M18&trade FORCE LOGIC&trade Press Tool with ONE-KEY&trade with 1/2"-2" CTS Jaws is the industry&rsquos first press tool with remote tracking, management, and lockout and is the smallest, most intelligent press tool on the market. The state-of-the-art press tool features an in-line design and brushless motor, enabling more run-time per charge and faster cycle times while being significantly smaller and nearly 20% lighter than the leading competitor. Like all MILWAUKEE® press tools, the in-line design with a forward hand position unlocks your ability to press with one hand and will fit nearly anywhere you can fit your arm. Equipped with REDLINK&trade electronics, the cordless press tool also provides the highest level of press accuracy and reliability available in the industry. Auto-cycle ensures a full press every time and the pre-press battery check prevents the tool from starting a press it can&rsquot complete. This press tool is ONE-KEY&trade enabled, logging, and uploading data from every press for retrieval via the ONE-KEY&trade desktop or mobile app. This allows for performance monitoring and provides you peace of mind in quality connections. With ½&rdquo to 4&rdquo capacity and compatibility with over 20 unique fitting systems, the plumbing press tool is a comprehensive press solution for plumbers and mechanical contractors. In addition to the press tool, this kit includes two M18&trade REDLITHIUM&trade CP2.0 battery packs, 1/2 in., 3/4 in., 1 in., 1 1/4 in, 1 1/2 in., and 2 in. jaws, and a carrying case.
Qty:
Part #:729-2625-20
- M18&trade HACKZALL® Recip Saw (Tool Only)
Our M18&trade HACKZALL® One-Handed Recip Saw features a Dual Gear Anti-Vibration System providing you with unmatched comfort and control. Its compact, lightweight design gives you superior control and versatility. The cordless recip saw's powerful motor gives you 0-3,000 strokes per minute while its 3/4&rdquo stroke length allows you to perform fast cuts through a wide range of material such as wood, metal, and PVC. The dual gear anti-vibration system increases control and accuracy. The HACKZALL® One-Handed Recip Saw also features a QUIK-LOK&trade blade clamp which allows you to perform fast and easy blade changes.
Qty:
Part #:271920
- M18 FUEL&trade Hackzall® (Tool Only)
The Milwaukee 2719-21 M18&trade FUEL&trade HACKZALL® is the fastest cutting and most powerful one-handed reciprocating saw. Utilizing a POWERSTATE&trade Brushless Motor and a best in class 7/8" stroke length, the M18&trade FUEL&trade HACKZALL® cuts up to 50% faster than competitors. The compact, one-handed design provides superior control and the ability to make cuts in tight spaces. The dual gear counter balance mechanism provides up to 4x lower vibration than traditional reciprocating saws, resulting in faster cut-starts in metal and reduced user fatigue. REDLINK PLUS&trade Intelligence ensures optimized performance and protects your investment from overload, overheating, and over-discharge. The M18&trade REDLITHIUM&trade XC5.0 Battery Pack provides more work per charge and more work over the life of the pack than competitive batteries. A rubber seal and weep holes provide superior protection against water and debris.
Qty:
Part #:272320
- AX Item Number 272320. Country of Origin MEX. Harmonized Tariff 8467290055:
Qty:
Part #:729-5625-20
- 3-1/2 Max HP Fixed-Base Production Router
Milwaukee's heavy-duty, 3-1/2 max hp fixed-base production router, model 5625-20, features a powerful 15 amp Milwaukee-built motor with electronic variable speed (10,000-22,000 rpm), premium feedback circuitry and soft-start. To ensure a consistent, quality finish, the 36-position speed dial allows the user to precisely match the tool rpm to the bit diameter while the premium electronic feedback circuitry maintains speed and power under load. For controlled start-ups and reduced motor wear, the 5625-20 router also features a reliable electronic soft-start. Fully-loaded for production free-hand and router table routing, the router features Milwaukee's exclusive linear height adjustment system with above-the-table access, providing fast, precise coarse adjustments to within 1/8 in. and micro-fine adjustments to within 1/64 in. Unlike helical systems, the motor doesn&rsquot spin as the height is changed, ensuring that the motor controls and power cord remain in a constant, optimal position. The revolutionary system can be accessed from above a router table with the included T-wrench or any 3/8 in. hex socket wrench with extension, eliminating the need for awkward, below the table adjustments or the need for an auxiliary router lift. With an industry standard bolt-hole pattern and router base diameter along with removable handles for insert plate clearance, the 5625-20 readily converts any existing table or production jig set-up. For added protection when table-mounted, the router features an exclusive motor contamination shield that keeps damaging debris out without sacrificing airflow. The router also features a durable, rubber shield for dust-free access to the height adjustment system. For maximum operator control and comfort, the 5625-20 router has impact-resistant, tactile-grip handles set wide apart and angled forward. A heavy-duty, 22 amp switch and speed control dial positions are conveniently located to allow the operator full motor control while keeping both hands on the tool. The router features a durable, machined aluminum motor housing and base along with premium 1/2 in. self-releasing collet, 100% sealed ball bearings and a durable 8 ft. power cord with flexible strain relief for years of accurate, reliable operation.
Qty:
Part #:729-5317-21
- Business Unit Tools. Product Level 1 Tools Corded. Product Level 2 Tools Hammers. Product Level 3 TOL SDS Max. Product Level 4 TOL SDS Max/Spline Hammers. AX Item Number 531721. Country of Origin CHN. Harmonized Tariff 8467290080.:
Qty:
Part #:729-2641-20
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Applicators. Product Level 3 TOL Caulk Guns. Product Level 4 TOL Blank. AX Item Number 264120. Country of Origin VNM. Harmonized Tariff 8467290090.:
Qty:
Part #:729-2473-20
- M12&trade FORCE LOGIC&trade Press Tool
Our M12&trade FORCE LOGIC&trade Press Tool Kit is the lightest press tool on the market and represents a new level in portability and accessibility around installed pipe. The M12&trade press tool features a one-handed, in-line design enabling you to operate the tool nearly anywhere you can fit your arm. Built-in REDLINK&trade technology enables the plumbing press tool to monitor the force output, delivering you with quality connections. A visual indicator alerts you when a secure connection has been achieved and when the tool needs calibration. The cordless press tool features the best calibration standards, only requiring service every 32,000 crimps. This allows you to perform up to 4X more connections between services, keeping the tool on the job site up to 4X longer than competitive units. When used with our MILWAUKEE® press jaws, this tool delivers quality press connections on all major fitting brands. Our FORCE LOGIC&trade press tool is powered by Milwaukee M12&trade REDLITHIUM&trade batteries, allowing you to Cut, Fasten and Connect on One System.
Qty:
Part #:729-2473-22
- M12&trade FORCE LOGIC&trade Press Tool Kit with Jaws
Our M12&trade FORCE LOGIC&trade Press Tool Kit with Jaws is the lightest press tool on the market and represents a new level in portability and accessibility around installed pipe. The M12&trade press tool features a one-handed, in-line design enabling you to operate the tool nearly anywhere you can fit your arm. Built-in REDLINK&trade technology enables the plumbing press tool to monitor the force output, delivering you with quality connections. A visual indicator alerts you when a secure connection has been achieved and when the tool needs calibration. The cordless press tool features the best calibration standards, only requiring service every 32,000 crimps. This allows you to perform up to 4X more connections between services, keeping the tool on the job site up to 4X longer than competitive units. When used with our MILWAUKEE® press jaws, this tool delivers quality press connections on all major fitting brands. Our FORCE LOGIC&trade press tool is powered by Milwaukee M12&trade REDLITHIUM&trade batteries, allowing you to Cut, Fasten and Connect on One System.
Qty:
Part #:729-2715-DE
- M18&trade HAMMERVAC&trade Dedicated Dust Extractor
Milwaukee® HAMMERVAC&trade Dedicated Dust Extractor (2715-DE) features an inline dedicated design engineered to connect directly to and be power by the M18&trade 1-1/8&rdquo SDS Plus Rotary Hammer (2715-22). This design allows for a very compact HAMMERVAC&trade and rotary hammer combination to fit in the most confined work spaces. Utilizing the same replaceable certified HEPA filter as other HAMMERVACS&trade, which filter 99.97% of all particles greater than 0.3µm, means more compatibility on the jobsite. For accurate hole depths, this product is built with an adjustable depth stop and ruler for easy and precise adjustments. Featuring a high capacity dust box, users can now work longer without emptying dust box as often.
Qty:
Part #:729-2922-20
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Plumbing. Product Level 3 TOL Press. Product Level 4 TOL Tool (No Jaws). Product Level 5 TOL Force Logic. AX Item Number 277320. Country of Origin DEU. Harmonized Tariff 8467290090.:
Qty:
Part #:729-2773-20L
- Country of Origin DEU:
Qty:
Part #:729-2719-21
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Cutting. Product Level 3 TOL Hackzall. Product Level 4 TOL 1 Batt. Product Level 5 TOL FUEL. AX Item Number 271921. Country of Origin VNM. Harmonized Tariff 8467220090.:
Qty:
Part #:729-3485-20
- Business Unit Tools. Product Level 1 Tools M12. Product Level 2 Tools Metal Working. Product Level 3 TOL Die Grinders. Product Level 4 TOL R.A. Die Grinders. Product Level 5 TOL FUEL. AX Item Number 248520. Country of Origin MEX. Harmonized Tariff 8467290010.:
Qty:
Part #:729-2916-20
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Hammers. Product Level 3 TOL SDS Plus. Product Level 4 TOL SDS Plus Hammers. Product Level 5 TOL FUEL. AX Item Number 291620. Country of Origin CHN. Harmonized Tariff 8467290080.:
Qty:
Qty:
Part #:729-49-16-2697X
- 1/2" - 2" IPS-P Pivoting Press Ring Kit for M18&trade FORCE LOGIC&trade Press Tools
Our IPS-P Pivoting Press Ring Kits are designed for use with M18&trade & M12&trade FORCE LOGIC&trade Press Tool on Viega® MegaPress®, Apollo® PowerPress® and other press fitting systems. The IPS-P Pivoting Press Ring Kit is a more efficient alternative to welding and threading, enabling you to press connections on schedule 5 up to schedule 40 black iron pipe and 304/316 stainless steel pipe. Pivoting functionality delivers greater access in tight spaces when paired with a compatible Milwaukee® Ring Jaw and FORCE LOGIC&trade Press Tool. Our press blocking system prevents improper ring and ring jaw mismatch, providing peace of mind in quality connections. The IPS-P Pivoting Press Rings, combined with a compatible Milwaukee® Ring Jaw and in-line FORCE LOGIC&trade Press Tool, deliver unrivaled access in tight spaces and around installed pipes, providing you with controlled, flameless copper connections for unmatched productivity.
Qty:
Part #:261320
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Hammers. Product Level 3 TOL SDS Plus. Product Level 4 TOL Brushless. Product Level 5 TOL Blank. AX Item Number 261320. Country of Origin CHN. Harmonized Tariff 8467210070.:
Qty:
Part #:134-DCF850P1
- DEWALT 20V MAX ATOMIC Cordless Brushless 1/4 in Impact Driver Drill Kit (1) Lithium Ion Battery with Charger (Replaces DCF850P2)
Maneuver With Ease - Access difficult-to-reach spots with a compact, ergonomic design.
High-Performance Brushless Motor - Drive large-diameter screws with 1,825 in-lb. of max torque and 3,250 rpm.
Pro-Level Control - Work precisely with a variable 3-speed trigger.
Brighten Work Areas - Help enhance visibility in dimly lit spaces with the integrated 3-LED work light.
Part of the ATOMIC COMPACT SERIES - ATOMIC power tools are designed to be compact and powerful for jobs in tight spaces and feature 20V MAX compatibility.
Tackle tough jobs and maneuver in small spaces with the ATOMIC 20V MAX 3-Speed 1/4 in. Impact Driver. At less than 4 in. (front to back), this Impact Driver features 1,825 in-lbs. of max torque and 3,250 rpm for driving large screws.
Includes
(1) Tool
(1) Belt Hook
(1) 20V Max 5.0Ah Battery
(1) Charger
(1) Contractor Bag
Qty:
Part #:284620
- Key Features
Faster Simultaneous Power
Fits All M18&trade Batteries
175W Continuous Watts
Ideal for laptops, cellphones, TVs, and other small devices
Rafter hooks allows for versatility on the jobsite to hang on common materials or carts
Lightweight, compact design
Battery, charger, and device cords not included
5 year warranty
Includes
(1) M18&trade TOP-OFF&trade 175W POWER SUPPLY (2846-20)
Qty:
Part #:134-DCF845P1
- 20V MAX XR® Brushless Cordless 3-Speed 1/4 in. Impact Driver Kit
BRUSHLESS MOTOR delivers 1825 in-lbs of torque and 3400 RPM to drive large diameter screws
COMPLETE TOUGH FASTENING APPLICATIONS on the jobsite with 30% more torque
PRO-LEVEL CONTROL and precision with variable speed trigger and 3-speed setting
Experience Power&trade and drive large diameter screws with the 20V MAX XR® 1/4 in. 3-Speed Impact Driver. Featuring a compact design and 3-speeds, this powerful impact driver delivers 1,825 in-lbs. of max torque and premium user control for a variety of applications. This product is a Chip Ready&trade tool that offers seamless integration into the TOOL CONNECT&trade system (chip sold separately). For user convenience, this kit is packaged with (1) 20V MAX 5Ah Battery, a charger, and a durable storage bag for portability on the jobsite.
Qty:
Displaying: 1 - 22 of 22 Matching Items