Columbus McKinnon (C-M)
Carborundum
View:
Active Filters :
Part #:507472
- Carborundum Aluminum Oxide Resin Cloth Sheets, Aluminum Oxide Cloth, P240
Product DetailsSuperior conformability to complex surfaces and better finishes
Qty:
Part #:501754
- Silicon Carbide Paper Sheets Better Tier / Silicon Carbide Resin Waterproof Paper
Exceptional finishing in wet applications.
BF 0416 W
Qty:
Part #:501742
- Silicon Carbide Paper Sheets Good Tier / Silicon Carbide Resin Waterproof Paper
May be used wet or dry on plastic or painted surfaces. Best results are obtained when used wet.Excellent for machine and hand rubbing of lacquer, urethane and varathane between coats. Ideal forobtaining fine finishes and feather-edging painted surfaces.
Qty:
closeout
Part #:507581
- CLOSEOUTS Only 1 Left!
- Aluminum Oxide Cloth Rolls Good Tier / Aluminum Oxide Resin Cloth Ideal for cleaning and deburring metal surfaces. May be used dry or with oil.
JCF 0852
$
28.32
Qty:
$
326.00
Qty:
Part #:510283
- CM Series 632
close radius trolley With revolutionary advances, this shorter, more compact
trolley is 50% lighter than competitive trolleys, yet every bit
as tough. Negotiates radius curves as tight as 7 to 10 inches
Made of highest quality rolled steel
Unique double row, ball bearing wheel design
for greater wear capacity
Larger V-bars available for wider flange adjustment
For low headroom applications
Bearings prepacked with lifetime lubricant
Exclusive Dial-Fit collar quickly adapts trolley to
wide range of beams and patented rails
Dust covers shield and protect bearings
Trolleys available for larger beams, rails or tracks
contact CM
Cast iron trolley guards available (except for 3 ton)
Lifetime warranty
Made in U.S.A.
$
446.00
Qty:
closeout
$7.74 MSRP
$
3.50
Part #:500702
- CLOSEOUTS Only 100 Left!
- Silicon Carbide Sandscreen SheetsGood Tier / Silicon Carbide Waterproof Resin Sandscreen
Features &bull Black, silicon carbide abrasive&bull P-graded in 220 and coarser grits &bull Full resin bond system &bull Screen backing &bull Both sides are usable
Benefits
&bull Very sharp and hard, but brittle
&bull Provides consistent finishes
&bull Maximum grain adhesion
&bull Load resistant
Qty:
Part #:500975
- Aluminum Oxide Cloth Rolls Good Tier / Aluminum Oxide Resin Cloth
Ideal for cleaning and deburring metal surfaces. May be used dry or with oil.
Part #:507583
- Aluminum Oxide Cloth Rolls Good Tier / Aluminum Oxide Resin ClothIdeal for cleaning and deburring metal surfaces. May be used dry or with oil.
JCF 0852
Qty:
Part #:505714
- Aluminum Oxide Cloth Sheets Good Tier / Aluminum Oxide Resin Cloth
Ideal for hand sanding, deburring, polishing and removing cutting tool marks on all metal parts.
P320 JCF 0852
Qty:
Part #:507471
- Aluminum Oxide Cloth Sheets Good Tier / Aluminum Oxide Resin Cloth
Ideal for hand sanding, deburring, polishing and removing cutting tool marks on all metal parts.
JCF 0852
Qty:
Part #:507466
- Aluminum Oxide Cloth Sheets Good Tier / Aluminum Oxide Resin Cloth
Ideal for hand sanding, deburring, polishing and removing cutting tool marks on all metal parts.
JCF 0852
Qty:
Part #:507465
- Aluminum Oxide Cloth Sheets Good Tier / Aluminum Oxide Resin Cloth
Ideal for hand sanding, deburring, polishing and removing cutting tool marks on all metal parts.
JCF 0852
Qty:
Part #:503817
- Aluminum Oxide Narrow Belts Good Tier / Aluminum Oxide Resin Waterproof Cloth
Ideal for operations requiring a belt specification that does not generate heat, but is capable of sandinga variety of materials. Closed coat for fast metal removal.
Grading P60
YP 0998 W
Qty:
Part #:504491
- Aluminum Oxide Narrow Belts Good Tier / Aluminum Oxide Resin Waterproof Cloth
Ideal for operations requiring a belt specification that does not generate heat, but is capable of sandinga variety of materials. Closed coat for fast metal removal.
Qty:
Part #:507452
- Silicon Carbide Paper Sheets Better Tier / Silicon Carbide Resin Waterproof Paper
Exceptional finishing in wet applications
BF 0416 W
Qty:
Part #:505674
- Fibrate x Non-Woven Hand Pads Good Tier / Aluminum Oxide, Silicon Carbide, or Non-Abrasive
Very fine, aluminum oxide pads for general cleaning and finishing, removal of rust and oxidation from metals, and lightlysanding old paint or new primers. No color bleeding when working with solvents. 84700 is perforated to create two smaller4-1/2" x 6" pads.
Fibrate x Non-Woven Hand PadsGood Tier / Aluminum Oxide, Silicon Carbide, or Non-Abrasive
Very Fine A/O Gen. Purp. Maroon
Qty:
Part #:500847
- Green &ndash 05539579600 A very fine grit aluminum oxide pad for general clean-up as well as finishing stainless steel.
Fibrate x Non-Woven Hand PadsGood Tier / Aluminum Oxide, Silicon Carbide, or Non-Abrasive
Fibratex products are a non-woven nylon web impregnated with abrasive grain and resin bond. They arenon-metallic, won't rust, and are ideal as replacements for steel wool and/or wire brushes.
Qty:
Part #:800373
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
Qty:
Part #:800375
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
$
1,707.91
Qty:
Part #:301703
- Greenie® Grounding Wire Connector, Model 92® Green, Box of 100
For grounding and bonding
High-leverage, contoured wing design provides superior torque on every twist
Wide range, live-action spring handles small combinations and expands to accommodate large combinations as you need it
Copolymer shell expands for smooth, progressive tightening providing dependable connections
Removable for repeat usage on same size or larger combinations
UL 486C & UL 467 Listed
More power with every twist.
The Wing-Nut® Wire Connector provides an easy, secure grip when connecting a wide range of wires. The specially designed contoured wings make for extra torque and quick work on any electrical job. The wide range, live-action spring is flexible enough to handle small combinations with ease but then expands to accept large combinations when you need it. It can also be reused on same size or larger combinations for quick and easy circuit changes and additions.
The Wing-Nut® also features a tough, copolymer, flame-retardant shell that withstands environmental extremes with a deep skirt that provides maximum dielectric protection to prevent flash-over and turned-back strands.
The Red Model 452® offers the widest range winged connector in the industry from 2 #18 to 4 #10.
Greenie Grounding Connectors fully meet the intent of the NEC and specifically aids in compliance with the following
Article 250 Grounding
250-146 Connecting Receptacle Grounding Terminal to Box
250-148 Continuity and Attachment of Equipment Grounding Conductors to Boxes
(B) Grounding continuity
(D) Nonmetallic boxes
Qty:
Part #:300190
- Twister® Wire Connector, Model 341® Tan, Box of 100
Swept-Wing Design Industry's Choice for Comfort
Preferred Choice for Residential Jobs
Comfortable swept wings offer extra leverage and less effort on large wire combinations
Expanding square-wire spring supports a wide range of common wiring configurations
Durable copolymer shell expands for smooth, progressive tightening that provides dependable connections
Hexagonal top with ribbed cap allows for quick fingertip start as well as use of standard 5/16 in. nutdriver for fast installation
Quick take-up on even the toughest combinations, including solid-to-stranded
Qty:
Part #:307274
- Yellow 77® Plus, 1-Quart Squeeze Bottle
IDEAL Yellow 77® Plus Wire pulling lubricant is a wax-based formula offering superior lubricity due to the Rapid Glide&trade polytetrafluoroethylene additive &mdash great for tough pulls. It is safe to use with all cable types. It won't break down/separate after repeated exposure to freezing temperatures and dries to a thin, non-conductive film that won't clog conduit. Yellow 77® Plus has a creamy texture and clings to cable throughout long pulls. Apply conveniently and uniformly by hand or brush. It is a homogeneous blend that requires no mixing and forms surface coat to control evaporation, so it won't dry out. It is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. Lubricant remains stable in high temperature from 32°F to 190°F (0°C to 88°C). It comes in 1 qt squeeze bottle, 1-gallon bucket, and 5-gallon bucket. Lubricant is UL listed.
Rapid Glide&trade polytetrafluoroethylene additive provides greater lubricity than other wax-based lubricants &mdash great for tough pulls
Safe to use with all cable types
Clings to cable throughout long runs, even where moisture is present
Remains temperature stable from 32°F to 190°F (0°C to 88°C)
Environmentally safe &ndash non-toxic, non-flammable and non-corrosive
Qty:
Part #:800374
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
$
1,306.00
Qty:
Displaying: 1 - 24 of 226 Matching Items