Pennunion Corp
Columbus McKinnon (C-M)
View:
Active Filters :
Part #:309911
- Copper Mechanical Lug - One Hole Offset Tongue 8 Sol. to 2 Str. CU
$
1.46
Qty:
$
448.55
Qty:
Part #:510283
- CM Series 632
close radius trolley With revolutionary advances, this shorter, more compact
trolley is 50% lighter than competitive trolleys, yet every bit
as tough. Negotiates radius curves as tight as 7 to 10 inches
Made of highest quality rolled steel
Unique double row, ball bearing wheel design
for greater wear capacity
Larger V-bars available for wider flange adjustment
For low headroom applications
Bearings prepacked with lifetime lubricant
Exclusive Dial-Fit collar quickly adapts trolley to
wide range of beams and patented rails
Dust covers shield and protect bearings
Trolleys available for larger beams, rails or tracks
contact CM
Cast iron trolley guards available (except for 3 ton)
Lifetime warranty
Made in U.S.A.
$
588.72
Qty:
Part #:800373
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
$
1,005.72
Qty:
Part #:800375
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
$
2,130.66
Qty:
Part #:800374
- The CM Puller is designed for heavy-duty construction and industrial
applications. Used to pull, lift, drag or stretch, it features Tough aluminum alloy construction
and powder coat finish
Weatherproof for outdoor service
Simple construction with fewer parts
for ease of maintenance and lower
inventories
Hoistaloy hardened steel link type
load chain for strength, long wear
life and flexibility
Weatherized Weston-type automatic
braking system for positive load
control
Easy, one-hand operation and
control only 58 pounds of pull
required for 34 ton model capacity
Forged upper and lower hooks with
latches standard
Free wheeling for fast and easy
attachment to load
Upper and lower Latchlok hooks
available for all capacities
Optional Load Limiter protection
device stops transmission of lever
forces protecting against dangerous
overload
Optional anchor sling simplifies
attachment to allow anchor
hook to swivel in tight space
applications (34 & 112 ton
units only)
Optional Load Sentry warns of
overload condition
Optional zinc-plated chain available
Unlimited lift
Lifetime warranty
Metric rated
Made in U.S.A.
$
1,497.46
Qty:
Part #:309877
- Copper Split Bolt Connector for Two Copper Conductors - 16 Str. to 8 Str. (Equal Main & Tap)
$
1.82
Qty:
Part #:309890
- Copper Split Bolt Connector for Two Copper Conductors - 2 Sol. to 2/0 Str. (Equal Main & Tap)
$
8.08
Qty:
Part #:309891
- Copper Split Bolt Connector for Two Copper Conductors - 2 Sol to 3/0 Str. (Equal Main & Tap)
$
11.02
Qty:
Part #:309892
- Copper Split Bolt Connector for Two Copper Conductors - 1/0 Sol. to 250 kcmil (Equal Main & Tap)
$
12.89
Qty:
Part #:309893
- Copper Split Bolt Connector for Two Copper Conductors - 4/0 Str. to 350 kcmil (Equal Main & Tap)
$
23.77
Qty:
Part #:309942
- Copper Compression Lug - Standard Barrel, One Hole Tongue with Inspection Window 4 AWG
$
1.24
Qty:
Part #:309943
- Copper Compression Lug - Standard Barrel, One Hole Tongue with Inspection Window 4 AWG
$
2.39
Qty:
Part #:309944
- Copper Compression Lug - Standard Barrel, One Hole Tongue with Inspection Window 2 AWG
$
2.39
Qty:
Part #:309945
- Copper Compression Lug - Standard Barrel, One Hole Tongue with Inspection Window 2 AWG
$
2.39
Qty:
Part #:309946
- Copper Compression Lug - Standard Barrel, One Hole Tongue with Inspection Window 2 AWG
$
2.39
Qty:
Part #:309950
- Copper Compression Lug - Standard Barrel, One Hole Tongue with Inspection Window 1/0 AWG
$
2.68
Qty:
Part #:309951
- Copper Compression Lug - Standard Barrel, One Hole Tongue with Inspection Window 1/0 AWG
$
2.68
Qty:
Part #:309952
- Copper Compression Lug - Standard Barrel, One Hole Tongue with Inspection Window 2/0 AWG
$
3.15
Qty:
Part #:801791
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
392.04
Qty:
closeout
$
421.92
Qty:
Part #:802163
- CM Series 632
close radius trolley With revolutionary advances, this shorter, more compact
trolley is 50% lighter than competitive trolleys, yet every bit
as tough. Negotiates radius curves as tight as 7 to 10 inches
Made of highest quality rolled steel
Unique double row, ball bearing wheel design
for greater wear capacity
Larger V-bars available for wider flange adjustment
For low headroom applications
Bearings prepacked with lifetime lubricant
Exclusive Dial-Fit collar quickly adapts trolley to
wide range of beams and patented rails
Dust covers shield and protect bearings
Trolleys available for larger beams, rails or tracks
contact CM
Cast iron trolley guards available (except for 3 ton)
Lifetime warranty
Made in U.S.A.
$
699.60
Qty:
Part #:801783
- SERIES 622
MODEL 622-A
1/2 TO 5 TON CAPACITIES
STANDARD LIFTS UP TO 30 FT.
HAND CHAIN HOIST. The CM Series 622 hand chain hoist features
a simple, efficient and economical design. With an ultra-low-headroom profile and lightweight steel construction, the CM 622 is easy to install, even in confined spaces. Redesigned for optimal performance, this hoist requires even less pull force for operation and has larger hook throat openings for easier attachment.
$
343.44
Qty:
Part #:300122
- BCUA-4 - Aluminum Penn-Crimps® Splice
For copper or aluminum stranded wire
Seamless, one piece pure aluminum construction.
Tin plating assures maximum conductivity.
Generous entrance chamfer provides easy cable insertion.
The barrels are filled with Cual-Aid® and capped at factory to eliminate the need for separate application of oxide inhibitor to the conductor. Wire brushing of aluminum conductor is required. This assures a stable cool running joint.
Positive cable stops insure proper insertion
Catalog number and conductor size marked on every piece insures positve identification. Can be installed with existing crimping tools. Color coding conforms to industry requirements to insure proper connector/die selection and to provide for faster installation
BCUA LUGS ARE SUITABLE FOR USE AT VOLTAGES UP TO 35 KV provided connector is taped in accordance with accepted practices. 5KV is maximum voltage level in all bare splice applications.
EPDM rubber underground submersible cover available - see catlaog number SSI-500
Concentric, compressed and compact stranding
ConductorType
Conductor Range
Wire Diameter (in.)
Aluminum or Copper
4 Str.
.232
Qty:
Displaying: 1 - 24 of 86 Matching Items