Irwin
Core and Main
View:
Active Filters :
- Brand: Core and Main Irwin
Part #:841-585-3095001
- Features and Benifts
&bull Adaptors feature a 3/8" square drive toaccommodate socket wrench or extension&bull Designed for use with taps, reamers, screwextractors, and other tools with a square shank&bull Not recommended for cutting new threads
Qty:
Part #:841-585-88601
- Woodboring Bit Extensions Features
Available in 6" and 12" lengths
Not for use with quick change woodboring bits
Qty:
Part #:841-585-80187
- 13pc Tap (HCS) & Drill Bit Sets (HSS) Features
These drill and tap combinations produce a thread that is strong and easy to tap
135° split point HSS drill bits ensure fast, precise drilling
High carbon steel plug taps are ideal for general purpose threading
Qty:
Part #:134-15104
- Titanium Nitride Coated Fractional Self-Starting Features
Ideal for drilling holes into thin materials such as stainless steel, copper, brass, aluminum, plastic and laminates
Single-flute cutting edge for greater control through steps
3 flatted shank prevents slipping in drill chuck
New SpeedPoint tip penetrates faster than previous Unibits and prevents walking
12 Steps
3/8" Hex Shank Size
Qty:
Part #:221100
- #585 Washers Carbon Steel For 3&rdquo - 12&rdquo Socket Clamps&bull Usage for 3/4&rdquo rod&bull Two washers are requiredfor each Socket Clamp
$
6.40
Qty:
Part #:203864
- Socket Clamps Pipe OD 4.8, 5/8in-11 x 3in Bolt Size, Stock Size 1/2in x 2in,
$
56.85
Qty:
Part #:203865
- Socket Clamps Pipe OD 6.90in, 5/8in-11 x 3in Bolt Size, Stock Size 1/2in x 2in,
For use in preventing underground pipe joints from separating
Also known as &ldquoRetainer Clamps&rdquo or &ldquoFriction Clamps&rdquo. Designed for centrifugally-spun cast and ductile iron pipe with OD&rsquos as shown in the table below.
All Socket Clamps include two half clamps, two bolts and nuts and two washers. Sizes 3&Prime through 12&Prime are supplied with #585 cast washers, which are shown below as replacement parts. Sizes 14&Prime and larger are supplied with two fabricated washers.
Used with all-thread rod and Trumbull tie-lugs or tie-bolts for joint restraint, shown
$
56.65
Qty:
Part #:203866
- Socket Clamps Pipe OD 9.05in, 5/8in-11 x 3in Bolt Size, Stock Size 1/2in x 2in,
For use in preventing underground pipe joints from separating
Also known as &ldquoRetainer Clamps&rdquo or &ldquoFriction Clamps&rdquo. Designed for centrifugally-spun cast and ductile iron pipe with OD&rsquos as shown in the table below.
All Socket Clamps include two half clamps, two bolts and nuts and two washers. Sizes 3&Prime through 12&Prime are supplied with #585 cast washers, which are shown below as replacement parts. Sizes 14&Prime and larger are supplied with two fabricated washers.
Used with all-thread rod and Trumbull tie-lugs or tie-bolts for joint restraint, shown
$
84.75
Qty:
Part #:203867
- Socket Clamps Pipe OD 11.10in, 5/8in-11 x 3in Bolt Size, Stock Size 1/2in x 2in,
For use in preventing underground pipe joints from separating
Also known as &ldquoRetainer Clamps&rdquo or &ldquoFriction Clamps&rdquo. Designed for centrifugally-spun cast and ductile iron pipe with OD&rsquos as shown in the table below.
All Socket Clamps include two half clamps, two bolts and nuts and two washers. Sizes 3&Prime through 12&Prime are supplied with #585 cast washers, which are shown below as replacement parts. Sizes 14&Prime and larger are supplied with two fabricated washers.
Used with all-thread rod and Trumbull tie-lugs or tie-bolts for joint restraint, shown
Qty:
Part #:1585-364-3429
- Socket Clamps Pipe OD 17.40, 1in-8 x 4-1/2in Bolt Size, Stock Size 3/4in x 4in,
For use in preventing underground pipe joints from separating
Also known as &ldquoRetainer Clamps&rdquo or &ldquoFriction Clamps&rdquo. Designed for centrifugally-spun cast and ductile iron pipe with OD&rsquos as shown in the table below.
All Socket Clamps include two half clamps, two bolts and nuts and two washers. Sizes 3&Prime through 12&Prime are supplied with #585 cast washers, which are shown below as replacement parts. Sizes 14&Prime and larger are supplied with two fabricated washers.
Used with all-thread rod and Trumbull tie-lugs or tie-bolts for joint restraint, shown
Qty:
Part #:134-54009
- 9-pc Fractional Bolt Extractor Set Features
When you are faced with a rounded-off, rusted-tight or painted-over bolt, bolt extractors will break it free
Reverse spiral flutes are designed to bite down to provide maximum gripping power
High carbon steel ensures longer life and greater durability
Universal lobular design fits all types of fasteners
3/8" square drive for use with hand ratchets, impact wrenches, and air ratchets hexagonal flats for use with flat wrench, pliers, adjustable wrench, sockets or VISE-GRIP locking pliers
Set includes plastic case
Qty:
Part #:841-586-2089100
- Folding Features
Quick Change Button
Extended Thumb Ledge
Anchored Belt Clip
Wire Stripper Notch
Qty:
Part #:841-586-IRHT82584
- New Fast Release&trade Locking Clamp Features
20% Reduced Hand Span¹ improves user control and helps reduce hand strain
Wide-opening jaws provide greater versatility in clamping a variety of shapes
Redesigned tactile grip zone helps improve user control and is suited for high-temperature applications
Hex key adjusting screw tightens to adjust pressure and draws materials together, providing a more controlled release
Made with a one-handed, triggerless release that is 2X easier to open²
Built with heat treated alloyed steel for maximum durability
Backed by IRWIN Lifetime Guarantee
Qty:
Part #:134-394100
- Country of Origin BRAZIL HAZMAT Item NO Special Order Item NO State Restricted NO:
Qty:
Qty:
Part #:310101
- 48Pc Master Extraction Set Features
6 Spiral Flute Extractors - For use on common fasteners where lower torque is adequate
13 Multi-Spline Extractors - For use when higher torque or a lower profile tool is needed
13 Bolt Extractors - For use when part of the fastener is exposed
16 Left-Hand Cobalt Drill Bits - Use these to drill out the interior of the fastener. They often extract the fastener by themselves.
Qty:
Part #:134-26394
- Country of Origin UNITED STATES. HAZMAT Item NO. Special Order Item NO.:
Qty:
Part #:134-53226
- Country of Origin UNITED STATES. HAZMAT Item NO. Special Order Item NO. State Restricted NO:
Qty:
Part #:134-97094ZR
- 25-pc Fractional Tap & Hex Die Set Features
We're working with a variety of tradesmen to solve endless fastening challenges IRWIN® HANSON® Taps & Dies are the answer. Whether creating new tools from raw steel or repairing damaged and worn threads, achieving a precise fit is essential. IRWIN Industrial Tools® sets the standard for delivering quality every step of the way in your threading applications.
Qty:
Part #:841-586-2078712
- 8-pc GrooveLock Pliers Set Features
Press and slide button quickly adjusts lower jaw
All purpose jaw grips on round, flat, square and hex shapes
More groove positions provide the optimum hand location for a better grip on the work piece
ProTouch&trade Grips provide extra comfort and reduces hand fatigue
Ratcheting action allows GrooveLock to be adjusted from the open position up to the work piece by pushing the handle up - no need to press the button
Anti-pinch design prevents handles from pinching
Qty:
Qty:
Part #:134-4008
- Replacement Parts Features
Exclusive parts for Vise-Grip locking tools including springs, adjusting screws, chains and pads
Qty:
Part #:134-275
- Country of Origin PEOPLE'S REPUBLIC OF CHINA. HAZMAT Item NO. Special Order Item NO.:
Qty:
Part #:134-3095001
- IRWIN Tap Socket Set, Adjustable, 2-Piece
Fits all 3/8" square drive wrenches
Tackle a variety of driving, tapping, and extraction jobs with the Hanson 2 pc. Tap Adaptor Set. These adaptors are designed for use with taps, reamers, screw extractors, and other tools with a square shank. Each adaptor features a 3/8 in. square drive to accommodate socket wrenches and extensions. Not recommended for cutting new threads.
Qty:
Displaying: 1 - 24 of 32 Matching Items