Devcon
3M
Part #:500440
- Product Details
Typical Use
Bonds metals, fabrics, ceramics, glass, wood, and concrete (in combinations).
Brand
5 Minute Epoxy
Chemical Composition
Epoxy resin polyamines
Color
Light Amber
Components
2 part
Cure System
Room Temperature
Cure Time
12h @ 22.2 °C
Dielectric Strength
490 V/mil
Elongation
1%
Flash Point
>204.4 °C
Hardness
85 D
Impact Resistance
5.5 ft-lb/in^2
Mix Ratio
11 by volume 11 by weight
Peel Strength
2 to 3 pli
Service Temperature
-40 to 93.3 °C
Shear Strength
1,900
Specific Gravity
1.17
Viscosity
Mixed 10,000
Working Time
3 to 6min @ 22.2 °C
$
21.25
Qty:
Part #:508073
- Devcon® Plastic Steel® Putty (A)The original metal-filled epoxy putty, itis ideal for repairing areas wherewelding or brazing would be impractical.Can be drilled, tapped and machined.Conforms to the requirements ofMIL-PRF-24176C, Type I.
$
95.13
Qty:
Part #:508082
- Description
Aluminum-filled epoxy putty for dependable non-rusting repairs to aluminum castings, machinery and equipment widely used in HVAC applications.
Key Features
Repairs air conditioning system components
Listed under NSN Stock #8030-00-051-4511 #8030-00-670-8553
Bonds to aluminum and many other metals
Fills porosity in aluminum castings
Can be machined drilled or tapped using conventional metalworking tools
Qualifies under Mil Spec MIL-PRF-24176C, Type II
Open Time 60 Minutes
Gap Fill 0.0625&Prime &ndash 0.75&Prime
Devcon® Metal Repair PuttiesMetal-filled epoxy putties allow fast, economical, permanent repairs to plantand equipment cure quickly and resist corrosion and harsh chemicals
$
137.59
Qty:
Part #:510290
- Description
High-performance, brushable urethane coating that cures to a medium hard rubber (Hardness Shore A 86) for protection against wear due to abrasion and impact.
Key Features
Applies in thicknesses of 50 mils in one application
Protects hoppers, chutes, pump impellers, feeder bowls, and fans
Used with Flexane® primers for maximum adhesion to metals, rubber, wood, fiberglass, and concrete
Open Time 45 Minutes
Color Black
Unit Size 1lb
Part #:508074
- Devcon® Plastic Steel® Putty (A)The original metal-filled epoxy putty, itis ideal for repairing areas wherewelding or brazing would be impractical.Can be drilled, tapped and machined.Conforms to the requirements ofMIL-PRF-24176C, Type I.
$
428.46
Qty:
Part #:508083
- Description
Aluminum-filled pourable epoxy for making molds, patterns, and holding fixtures.
Key Features
Mixes and pours easily
Hardens in just over 1 hour cures in 16 hours
Can be cast over models for accurate reproduction of details
Low viscosity permits reproduction of delicate or intricate parts
Listed under NSN stock #8030-00-229-8740 #8030-00-159-5032
Open Time 75 Minutes
Gap Fill .0625&Prime &ndash .075&Prime
Liquids and Metal Casting CompoundsPourable epoxy compounds provide accurate detail reproductionand are ideal for making molds, patterns, holding fixtures andforming dies.
Part #:509841
- Description
Rapid-curing, general-purpose adhesive/encapsulant which easily dispenses and mixes in seconds, dries in 15 minutes and reaches functional strength in 1 hour.
Key Features
Bonds rigid durable substrates such as metals, glass, ceramics, concrete and wood in all combinations
Forms a clear hard rigid bond self leveling liquid in minutes
Listed under NSN Stock#8040-00-264-6816#8040-01-067-6126
Functional strength in 1 hour
100% reactive, no solvents
Low viscosity (10,000 cps)
Open Time 4-7 minutes
Fixture Time 10-15 minutes
Color Clear
Mix Ratio 11
Working Time Min 3
Working Time Max 6
Fixture Time Min 10
Fixture Time Max 15
Devcon® advanced epoxy adhesives are used for structural bonding, potting and encapsulating,and come in a variety of cure times and package sizes.
$
12.45
Qty:
$
109.03
Qty:
Part #:506005
- Description
Stainless steel-filled epoxy putty for patching, repairing and rebuilding stainless steel food processing equipment.
Devcon Stainless Steel Putty (ST)Product DetailsStainless steel-filled epoxy putty for patching, repairing, and rebuilding stainless steel food processing equipment Bonds to ferrous and non-ferrous metals Non-rusting NSF certified for potable water applications Acceptable for use in meat and poultry plants 58-minute working time
NSF/ANSI 61
$
198.65
Qty:
Part #:502554
- Devcon® Ceramic Repair Putty
Smooth, trowelable, alumina-filled epoxy compound for rebuilding and protecting processing equipment exposed to corrosion, erosion, cavitation, chemicals, and acids.
$
482.49
Qty:
Part #:511445
- Description
Mixing and delivery tool for11 and 21 epoxy adhesives (50 ml), 11 and 101 methacrylate adhesives (35 ml and 47 ml) and 11 urethane adhesives.
Key Features
Automatically and thoroughly mixes adhesive components for application
Easy to load
20 element
635 mm (.25&Prime) diameter
6 in. length
Use with 14280 and 74001 Mark 5 Manual Gun
$
170.94
Qty:
Part #:1165-MMM653YW
$
10.20
Qty:
Part #:841-230-14260
- Product Category ADHESIVES SEALANTS & TAPES
UPC Code 78143142604
$
34.21
Qty:
Part #:841-230-14280
- Product Category ADHESIVES SEALANTS & TAPES
UPC Code 78143142802
$
131.31
Qty:
Part #:841-247-311-1101
- E-A-R Classic Foam Earplugs, PVC, Corded
UPC 10080529110012
3MTM Personal Safety Division E-A-RTM ClassicTM Foam EarplugsProduct DetailsFlame-retardantMoisture resistantShape prevents shifting and keeps effectiveness of noiseSlow recovery PVC foam provides comfort with low pressure
$
85.20
BOX
Qty:
Part #:841-405-021200-04305
- UPC 021200043055
3MTM Industrial Vinyl Tape 471Product DetailsIdeal for color coding, abrasion protection, decoration, sealing, patching, splicing, wrapping, and general purpose applications
$
61.74
RL
Qty:
Part #:841-405-021200-04308
- Vinyl Tape 471, Blue, 4.35 in x 2 in
UPC 021200043086
Specifications
Big Catalog Page#
2012234
Brand
3M ABRASIVE
Color
Blue
Country of Origin
US
Hazmat
NO
Height [Nom]
4.35 in
Length [Nom]
2 in
UNSPSC
31201500
Width [Nom]
4.35 in
Wt.
0.66 lb
$
1,595.77
CASE
Qty:
Part #:841-405-021200-04310
- UPC 021200043109
3MTM Industrial Vinyl Tape 471Product DetailsIdeal for color coding, abrasion protection, decoration, sealing, patching, splicing, wrapping, and general purpose applications
$
66.49
RL
Qty:
Part #:841-405-021200-04313
- UPC 021200043130
3MTM Industrial Vinyl Tape 471Product DetailsIdeal for color coding, abrasion protection, decoration, sealing, patching, splicing, wrapping, and general purpose applications
$
66.49
RL
Qty:
Part #:841-405-048011-04029
- Scotch-Brite Hand Pads, Very Fine, Aluminum Oxide, Maroon
UPC 048011040295
3MTM Abrasive Scotch-BriteTM Hand PadsProduct DetailsDesigned to offer a flexible and conformable abrasive for general purpose cleaning, blending, prep work, and finishing without damaging the work pieceHand pads are also a great alternative to steel wool&mdashsimilar performance without the rusting or splintering
Qty:
Part #:841-500-102243
- Product Category ADHESIVES SEALANTS & TAPES
UPC Code 54007102243
3MTM Electrical Scotch® Vinyl Electrical Color Coding Tapes 35Product DetailsDesigned for use in phase identification, color coding of motor leads and piping systems and for marking safety areasHas excellent electrical insulating properties, wraps smoothly, conforms well and holds over a wide range of temperaturesPressure-sensitive rubber based adhesiveInhibits corrosion of electrical conductorsTesting and ApprovalsUL Listed, UL 510 Standard "Insulating Tape" (product category OANZ), file E129200 CSA Certification, Standard C22.2 No. 197-M1983 "PVC Insulation Tape", File LR 48769
$
3.40
RL
Qty:
Part #:300559
- 3M&trade Particulate Respirator 8511, N95
Details
NIOSH approved for at least 95 percent filtration efficiency against certain non-oil based particles
3M&trade Cool Flow&trade Exhalation Valve helps reduce heat build-up inside the respirator
M-Noseclip adjusts easily for fewer pressure points and greater comfort
Braided headbands two-strap design with dual point attachment helps provide a secure seal
Spacious and durable
Designed to increase comfort and wearability
Advanced Electret Media is designed for ease of breathing
This disposable N95 particulate respirator features the proprietary 3M Cool Flow Valve and helps provide comfortable, reliable worker respiratory protection. It is ideally suited for hot/dusty work settings that require long periods of wear.
3M&trade Particulate Respirator 8511, N95 is a disposable particulate respirator that is designed to help provide reliable respiratory protection of at least 95 percent filtration efficiency against certain non oil based particles. The respirator is designed for use for particles such as those from grinding, sanding, sweeping, sawing, bagging, or other dusty operations. This respirator can also help reduce inhalation exposures to certain airborne biological particles (examples mold, Bacillus anthracis, Mycobacterium tuberculosis), but cannot eliminate the risk of contracting infection, illness, or disease. Soft inner material provides added comfort while the cup shape design makes the respirator spacious and durable. Braided headbands and an adjustable M noseclip helps provide a custom and secure seal. The respirator incorporates 3M&rsquos proprietary technology with advanced electrostatically charged microfiber filter media designed for ease of breathing. This respirator is compatible with a variety of protective eyewear and hearing protection. Fitted with a 3M&trade Cool Flow&trade Exhalation Valve, this respirator is ideally suited for work situations involving heat, humidity, or long periods of wear. The 3M&trade Cool Flow&trade valve is designed to release your hot, humid exhaled breath quickly, helping to reduce heat buildup.
$
35.49
BOX
Qty:
Part #:841-405-021200-04367
- Country of Origin UNITED STATES. HAZMAT Item NO. Special Order Item NO. State Restricted NO:
$
90.01
RL
Qty:
Displaying: 1 - 24 of 27 Matching Items