Dixon Valve & Coupling Company
Armstrong International
View:
Active Filters :
Part #:334-600-A-SS
- Dixon Cam & Groove Type A Adapter x Female NPT Attributes
Maximum Operating Pressure
75 PSI
Weight
5.66 lb
Size
6"
Material
316 Stainless Steel
$
249.30
Qty:
Part #:334-AC600
- Boss-Lock Cam & Groove Type C Coupler x Hose Shank Attributes
Maximum Operating Pressure
75 PSI
Weight
5.52 lb
Size
6"
Material
356T6 Aluminum
Seal
Buna-N
$
207.93
Qty:
Part #:334-STC60
- King Combination Nipple NPT Threaded Attributes
Weight
13.15 lb
Size
6" (150 mm)
Material
Plated Steel
$
94.70
Qty:
Part #:510221
- Cast Iron Threaded Foot Valve Attributes
Weight
37.8 lb
Size
6"
Material
Painted Cast Iron
Thread
NPT
$
254.00
Qty:
Part #:510396
- Counter Clockwise Spiral Clamp Attributes
Weight
2.09 lb
Size
6"
Material
Plated Steel
Hose OD To
7"
Hose OD From
6-16/64"
$
23.68
Qty:
Part #:334-600-C-AL
- Dixon Cam & Groove Type C Coupler x Hose Shank Attributes
Maximum Operating Pressure
75 PSI
Weight
5.7 lb
Size
6"
Material
356T6 Aluminum
Seal
Buna-N
$
150.48
Qty:
Part #:334-6040-DA-AL
- Dixon® Cam & Groove Reducing Coupler x Adapter (Type DA):
$
133.17
Qty:
Part #:334-ID600
- Boss-Lock Cam & Groove Type D Coupler x Female NPT Attributes
Maximum Operating Pressure
75 PSI
Weight
12.85 lb
Size
6"
Material
Plated Ductile Iron
Seal
Buna-N
$
327.91
Qty:
Part #:334-RH600EZ
- EZ Boss-Lock Cam & Groove Type H Dust Cap Attributes
Weight
7.43 lb
Size
6" (150 mm)
Material
316 Stainless Steel
Seal
Buna-N
$
304.03
Qty:
Part #:501-D27090
- AEH Series Exhaust Heads Armstrongs AEH series carbon steel exhaust heads should be used when there is a risk of water carryover up an atmospheric vent pipe. The internal knock-out plate and stainless steel mesh screening effectively contains water carry-over and discharges it through the bottom drain leaving dry flash steam to vent through the top of the vessel.
Connections
• Flanged ASME B16.5 CL 150
• Drain FNPT
Qty:
Part #:501-D39124
- DS Series In-Line Condensate SeparatorsCarbon Steel Drain SeparatorCondensate in steam and air piping reduces thermal efficiency, causes water hammer, corrodes equipment such as valves and pipes, and causes other problems.
In-line (drain) separators DS-1, DS-2, DS-3, and DS-4 separate condensate efficiently by using the centrifugal force of steam or air created by introducing it into a specifically shaped path. Because of the simple structure of the drain separators, pressure loss is minimized, enabling clean, dry steam or air to be fed to equipment.
When steam or air flow enters the drain separator, centrifugal force is generated in the fluid because of the devices internal structural design. The fluid drains along the wall because of the difference in specific gravity with steam or air, eventually striking the baffle. The baffle guides the fluid to the drain outlet and to the trap, which drains it. As a result, small dirt particles and condensate are separated and removed from the system through the bottom drain.
• Cyclone structure maximizes liquid separation efficiency
• Pressure loss is extremely low
• No moving parts means no breakdowns
Qty:
Part #:501-D502638
- A/CA Series Cast Iron Y-Type Pipe Strainer Y-Type Cast Iron Strainer
• 250lb Screwed 1/2in - 3in
• Class 125 Flanged 2in - 6in
• Class 250 Flanged 2in - 6inScreen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:334-600-A-AL
- Dixon Cam & Groove Type A Adapter x Female NPT Attributes
Maximum Operating Pressure
75 PSI
Weight
2.545 lb
Size
6"
Material
356T6 Aluminum
$
86.29
Qty:
Part #:334-600-G-BU
- Cam & Groove Gasket
Attributes
Weight
0.12 lb
Optional Package/Box Quantity
25
Size
6" (150 mm)
Material
Nitrile Rubber
Color Code
1 blue stripe
Color
Black
$
3.44
Qty:
Part #:334-AD600
- Boss-Lock Cam & Groove Type D Coupler x Female NPT
Maximum Operating Pressure
75 PSI
Weight
5.06 lb
Size
6"
Material
356T6 Aluminum
Seal
Buna-N
$
173.71
Qty:
Part #:334-FM60F60T
- FM60F60T - Female to Male Hex Nipple Brass
Attributes
Weight
10.8 lb
Break Quantity
0
Optional Package/Box Quantity
0
Material
Cast Brass
Male Thread
NPT
Female Thread
NST (NH)
Male Thread Size
6"
Female Thread Size
6"
$
498.14
Qty:
Part #:334-600-F-AL
- Dixon Cam & Groove Type F Adapter x Male NPT Attributes
Maximum Operating Pressure
75 PSI
Weight
3.93 lb
Size
6"
Material
356T6 Aluminum
$
104.24
Qty:
Part #:334-600-G-VI
- Cam & Groove Gasket Attributes
Weight
0.175 lb
Size
6" (150 mm)
Material
FKM-A
Color Code
1 yellow stripe
Color
Green
$
47.29
Qty:
Part #:334-L06
- Grooved Lightweight Flexible Coupling - Series-L, Style 10
Attributes
Maximum Operating Pressure
300 PSI at 70°F (21°C)
Weight
6.5 lb
Optional Package/Box Quantity
5
Material
Ductile Iron
Seal
EPDM
Nominal Size
6"
Pipe OD
6.625"
$
36.15
Qty:
Part #:334-RHS60
- Catalog Pg 389. Package Qty Only N :
$
74.94
Qty:
Part #:801126
- Boss-Lock Cam & Groove Type H Dust Cap Attributes
Weight
4.8 lb
Size
6"
Material
356T6 Aluminum
Seal
Buna-N
$
175.62
Qty:
Displaying: 1 - 21 of 21 Matching Items