Dixon Valve & Coupling Company
Flexovit Usa
View:
Active Filters :
- Brand: Flexovit Usa Dixon Valve & Coupling Company Jamesbury
- Size: 6in
Part #:703544
- Offset Shaft and Eccentric Disc • No seat/disc contact in the open or intermediate position • Eliminates wear points at top and bottom of seats for higher cycle life • Reduces torque requirements, allowing for smaller operators Fire-Tested Version Available • Fire-Tite® Wafer-Sphere valves have been tested to API 607 and ISO-10497-5:
- 2004 Positive Shaft Retention • 2-1/2” - 24” (DN 65 - 600) valves are equipped with a retaining ring at the top of the shaft to prevent movement of the top portion of the shaft past the compression ring if for any reason the shaft should break within the valve. Easy Seat Maintenance • Simply remove body insert and replace seat – disassembly of disc and shaft is not required. Excellent for both On-Off and Control Applications • Superior control characteristics. • Inherent flow characteristic is modified equal percentage. • Wide rangeability. • Tight shut-off even in control applications. •Standard lugged style valves are suitable for bidirectional dead-end service at the full pressuretemperature rating of the valve.
Qty:
Part #:708927
- Offset Shaft and Eccentric Disc • No seat/disc contact in the open or intermediate position • Eliminates wear points at top and bottom of seats for higher cycle life • Reduces torque requirements, allowing for smaller operators Fire-Tested Version Available • Fire-Tite® Wafer-Sphere valves have been tested to API 607 and ISO-10497-5:
- 2004 Positive Shaft Retention • 2-1/2” - 24” (DN 65 - 600) valves are equipped with a retaining ring at the top of the shaft to prevent movement of the top portion of the shaft past the compression ring if for any reason the shaft should break within the valve. Easy Seat Maintenance • Simply remove body insert and replace seat – disassembly of disc and shaft is not required. Excellent for both On-Off and Control Applications • Superior control characteristics. • Inherent flow characteristic is modified equal percentage. • Wide rangeability. • Tight shut-off even in control applications. •Standard lugged style valves are suitable for bidirectional dead-end service at the full pressuretemperature rating of the valve.
Qty:
Part #:334-600-A-SS
- Dixon Cam & Groove Type A Adapter x Female NPT Attributes
Maximum Operating Pressure
75 PSI
Weight
5.66 lb
Size
6"
Material
316 Stainless Steel
$
249.30
Qty:
Part #:334-AC600
- Boss-Lock Cam & Groove Type C Coupler x Hose Shank Attributes
Maximum Operating Pressure
75 PSI
Weight
5.52 lb
Size
6"
Material
356T6 Aluminum
Seal
Buna-N
$
207.93
Qty:
Part #:334-STC60
- King Combination Nipple NPT Threaded Attributes
Weight
13.15 lb
Size
6" (150 mm)
Material
Plated Steel
$
94.70
Qty:
Part #:510221
- Cast Iron Threaded Foot Valve Attributes
Weight
37.8 lb
Size
6"
Material
Painted Cast Iron
Thread
NPT
$
254.00
Qty:
Part #:510396
- Counter Clockwise Spiral Clamp Attributes
Weight
2.09 lb
Size
6"
Material
Plated Steel
Hose OD To
7"
Hose OD From
6-16/64"
$
23.68
Qty:
Part #:334-600-C-AL
- Dixon Cam & Groove Type C Coupler x Hose Shank Attributes
Maximum Operating Pressure
75 PSI
Weight
5.7 lb
Size
6"
Material
356T6 Aluminum
Seal
Buna-N
$
150.48
Qty:
Part #:700341
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:700447
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:702391
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:701373
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Qty:
Part #:705123
- Unique Sealing The superior performance of Jamesbury ball valves is achieved by the unique design of the seats. The flexible lip seats exert continuous sealing pressure on the ball and automatically compensate for wear and changes in pressure and temperature, yielding positive bi-directional zero-leak shut-off. The stem seal sealing system ensures minimum emissions. Materials Standard products are available with carbon steel body and stainless steel trim or all stainless steel construction. Special body and trim materials such as Alloy 20, Hastelloy® C, and others are available upon request. For applications involving chemicals, acids, caustics, and steam we recommend our Xtreme® seat material, which provides superior lifecycle and sealing performance compared to virgin or filled PTFE. We can accommodate nearly any special customer or application specific requirement. Fite-Tite® Valves All Jamesbury Fire-Tite flanged ball valves are qualified to API 607 and ISO 10497. This ensures minimal leakage in the event of a fire.:
Qty:
Part #:705124
- Offset Shaft and Eccentric Disc • No seat/disc contact in the open or intermediate position • Eliminates wear points at top and bottom of seats for higher cycle life • Reduces torque requirements, allowing for smaller operators Fire-Tested Version Available • Fire-Tite® Wafer-Sphere valves have been tested to API 607 and ISO-10497-5:
- 2004 Positive Shaft Retention • 2-1/2” - 24” (DN 65 - 600) valves are equipped with a retaining ring at the top of the shaft to prevent movement of the top portion of the shaft past the compression ring if for any reason the shaft should break within the valve. Easy Seat Maintenance • Simply remove body insert and replace seat – disassembly of disc and shaft is not required. Excellent for both On-Off and Control Applications • Superior control characteristics. • Inherent flow characteristic is modified equal percentage. • Wide rangeability. • Tight shut-off even in control applications. •Standard lugged style valves are suitable for bidirectional dead-end service at the full pressuretemperature rating of the valve.
Qty:
Part #:334-ID600
- Boss-Lock Cam & Groove Type D Coupler x Female NPT Attributes
Maximum Operating Pressure
75 PSI
Weight
12.85 lb
Size
6"
Material
Plated Ductile Iron
Seal
Buna-N
$
327.91
Qty:
Part #:334-RH600EZ
- EZ Boss-Lock Cam & Groove Type H Dust Cap Attributes
Weight
7.43 lb
Size
6" (150 mm)
Material
316 Stainless Steel
Seal
Buna-N
$
304.03
Qty:
Part #:334-600-A-AL
- Dixon Cam & Groove Type A Adapter x Female NPT Attributes
Maximum Operating Pressure
75 PSI
Weight
2.545 lb
Size
6"
Material
356T6 Aluminum
$
86.29
Qty:
Part #:18-A2721
- Item # A2721, Type 27 Cutoff, Notching & Light Grinding Wheel
Flexovit HIGH PERFORMANCE Type 27 Combination Wheels are the hardest working aluminum oxide wheels available. Precision made to ensure smooth and safe operation, the versatile A30S and heavy duty A24/30T specifications set the standards for fast material removal, and for rugged reliability and long life.Heavy Duty - A24/30TExtremely rugged and hardworking. Delivers the longest life of any aluminum oxide wheel without sacrificing aggressive cutting/grinding.
Qty:
Part #:334-600-G-BU
- Cam & Groove Gasket
Attributes
Weight
0.12 lb
Optional Package/Box Quantity
25
Size
6" (150 mm)
Material
Nitrile Rubber
Color Code
1 blue stripe
Color
Black
$
3.44
Qty:
Part #:334-AD600
- Boss-Lock Cam & Groove Type D Coupler x Female NPT
Maximum Operating Pressure
75 PSI
Weight
5.06 lb
Size
6"
Material
356T6 Aluminum
Seal
Buna-N
$
173.71
Qty:
Part #:334-600-F-AL
- Dixon Cam & Groove Type F Adapter x Male NPT Attributes
Maximum Operating Pressure
75 PSI
Weight
3.93 lb
Size
6"
Material
356T6 Aluminum
$
104.24
Qty:
Part #:334-600-G-VI
- Cam & Groove Gasket Attributes
Weight
0.175 lb
Size
6" (150 mm)
Material
FKM-A
Color Code
1 yellow stripe
Color
Green
$
47.29
Qty:
Part #:801126
- Boss-Lock Cam & Groove Type H Dust Cap Attributes
Weight
4.8 lb
Size
6"
Material
356T6 Aluminum
Seal
Buna-N
$
175.62
Qty:
Displaying: 1 - 24 of 26 Matching Items