Pass & Seymour/legrand
Dykem
View:
Active Filters :
- Brand: Dykem Pass & Seymour/legrand
Part #:308114
- In-Line Portable 15A GFCI, Manual Reset
In-line portable GFCI interrupter
Qty:
Qty:
Part #:302600
- Midget Flanged Outlet - Black Face, Gray Flange
Qty:
Part #:301036
- Midget Connector, Black
Quality Materials, durability, and time-tested design
Qty:
Part #:302984
- Midget Flanged Inlet - Black Face, Gray Flange
Qty:
Part #:304924
- Midget Flanged Outlet - Black Face, Gray Flange
Qty:
Part #:829-220
- Appliance Switch
Qty:
Part #:829-2536
- Fluorescent Lampholder, White
Qty:
Part #:829-2537
- Fluorescent Lampholder, White
Qty:
Part #:841-253-83307
- DYKEM® Hi-SpotProduct DetailsIntensely blue, soft, uniform paste that spreads easily and evenly to show high spots on bearingsIt's most valuable when used on flat bearing surfaces of lathes, planers, milling machines, etcA thin coating may be left on the surface day in and day out, and will not dry outThe film remains "wet" and "transferable", and in condition for monthsNo night clean-up or morning rebluing is necessaryNon-hardeningTransfers from one surface to anotherSaves valuable time and money in surface scraping work
$
11.23
TUBE
Qty:
Part #:829-3796
- Outdoor Heavy Cast Aluminum Multigang Cover, Gray
Heavy-duty die-cast aluminum covers and plate.
3/32 inch gasket included.
Stainless steel mounting screws.
Qty:
Part #:829-3830
- Power Outlets
cULus ListingNumber 140596
Qty:
Part #:829-5406BK
- Appliance Switch, Black
Qty:
Qty:
Part #:829-FCSD40
- Support Grips Service and Bus Drop
Service drop grips provide support for utility distribution lines from service pole to building or from pole to pole.
They can also be used for cable TV and fiber optic cable support.
They are woven from tinned bronze wire to provide superior corrosion resistance, and are available in single eye and locking bale configurations.
Qty:
Part #:829-CR6300
- Industrial Extra Heavy Duty Spec Grade Receptacles, Corrosion-Resistant, Back and Side Wire, 20A, 125V, Yellow
One-piece brass mounting strap with integral ground.
Strap tabs wrap around and lock down on face to prevent strap from separating from face and back body.
Two drive screws anchor strap to back body and face.
Exclusive patented feature, circuit label on face allows permanent circuit identification.
.036 inch thick, brass, triple-wipe power contacts for lasting retention.
Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring.
Impact-resistant nylon face and back body.
Oversized #10 deep tri-drive head brass terminal and ground screws.
Exclusive patented feature, external screw-pressure-plate back wire clamp on ground terminal for faster, easier installation.
External screw-pressure-plate back wire clamps with #10 brass terminal screws for visual assurance of a good connection.
Line terminals accept #14 -- #10 AWG stranded or solid copper clad conductors.
Auto-ground clip assures positive ground.
Corrosion-resistant models have nickel-plated straps and contacts.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
cULus ListingNumber 140596
Qty:
Part #:829-CS6365
- California Standard Plug
Product Line
Pass & Seymour
Color
Black
UPC Number
785007636505
Country Of Origin
Mexico
Application Sector
Industrial
Standard
UL 498
Qty:
Part #:829-FC150U
- Support Grips Standard Duty, Closed Mesh
Standard closed mesh support grips are designed for loads up to 600 lbs.
Vertical runs of no more than 100 ft.
They are available in a variety of eye styles and cable ranges for supporting electrical and fiber optic cable, metal rods, and tubing.
Closed mesh support grips are used when the end of the cable is accessible.
Support grips are woven of corrosion-resistant tinned-bronze wire.
Most Flexcor products have UL and/or CSA approvals. Please contact factory for approval information.
CSA File Number 67507
Qty:
Part #:829-13741
- Snap-in receptacle
Qty:
Part #:829-25W47
- Watertight NEMA 4X/6P Locking Connector, Yellow
Thermoplastic elastomer (TPV) construction stands up to impacts, oils, chemicals, heat , and weather.
Nickel-Plated blades and contacts for long lasting, superior corrosion resistance.
Multipoint sealing system provides environmental protection of NEMA 4, 4X, 6, 6P, & IP67 rated.
Devices resist high-pressure hose down of 1,500 psi.
Color coded sealing bushings provided for large range of cord diameters
Large ribs on body for a superior grip when mating.
CSA File Number 701645
Qty:
Part #:829-28W48
- 28W48 Watertight NEMA 4X/6P Locking Plug,Yellow
Thermoplastic elastomer (TPV) construction stands up to impacts, oils, chemicals, heat , and weather.
Nickel-Plated blades and contacts for long lasting, superior corrosion resistance.
Multipoint sealing system provides environmental protection of NEMA 4, 4X, 6, 6P, & IP67 rated.
Devices resist high-pressure hose down of 1,500 psi.
Color coded sealing bushings provided for large range of cord diameters
Large ribs on body for a superior grip when mating.
Qty:
Part #:829-29W48
- 29W48 Watertight NEMA 4X/6P Locking Connector,Yellow
Thermoplastic elastomer (TPV) construction stands up to impacts, oils, chemicals, heat , and weather.
Nickel-Plated blades and contacts for long lasting, superior corrosion resistance.
Multipoint sealing system provides environmental protection of NEMA 4, 4X, 6, 6P, & IP67 rated.
Devices resist high-pressure hose down of 1,500 psi.
Color coded sealing bushings provided for large range of cord diameters
Large ribs on body for a superior grip when mating.
Qty:
Part #:829-3802
- Power Outlets
cULus ListingNumber
140596
Qty:
Part #:829-3852
- Power Outlets
cULus ListingNumber 140596
Qty:
Displaying: 1 - 24 of 64 Matching Items