Dixon Valve & Coupling Company
E-Z Lok
View:
Active Filters :
- Brand: E-Z Lok Dixon Valve & Coupling Company Jamesbury J.H. Williams
- Size: 3/8in
Part #:701042
- 3/8in Jamesbury 9F Series/Eliminator 2000 Fire-Tite Threaded Ball Valve. Carbon steel body with stainless steel ball and stem. Jamesbury Xtreme seats with TFM seals. Non-ANSI Class Jamesbury Part # MA00060389FB2236XTB
Qty:
Part #:701896
- 3/8in Jamesbury 5H Value-Line Series High Pressure Threaded Ball Valve. Carbon steel body with stainless steel ball and 17-4PH stem. Seats are Acetal Homopolymer with PTFE seals. Jamesbury Part # MA0010763 5H22HBRT
Qty:
Part #:702783
- 3/8in Jamesbury 3000 Series Fire-Tite Threaded Ball Valve. Carbon steel body with stainless steel ball. Acetal seats with graphite seal. Jamesbury Part # MA0010768332236RLC
Qty:
Part #:700295
- Male NPTF x Hose Barb Attributes
Weight
0.061 lb
Material
Brass
Male Thread
NPTF
Length
1.76"
Hose ID
3/8"
Hex
11/16"
Male Thread Size
3/8"
$
2.03
Qty:
Part #:810217
- 1/2" Drive SAE 3/8" Standard Length Hex Bit Socket
&bull High-polished chrome finish socket cleans easily
&bull Two piece design allows bits to be replaced easily
Qty:
Part #:702874
- Barbed Hose Mender Attributes
Weight
0.0405 lb
Material
Brass
Length
2.06"
Hose ID
3/8"
$
1.59
Qty:
Part #:503700
- 3/8" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:100150
- Clear PVC Tubing Attributes
Tube OD
1/2"
Weight
5.95 lb
Material
PVC
Tube ID
3/8"
Color
Clear
Working Pressure
70 PSI @70°F
Length
100'
Maximum Temperature
175°F (79.4°C)
$
0.65
Qty:
Part #:701177
- 3/8in Jamesbury 9F Series/Eliminator 2000 Fire-Tite Threaded Stainless Steel Ball Valve. Stainless steel body with stainless steel ball and stem. Jamesbury Xtreme seats with TFM seals. Non-ANSI Class Jamesbury Part # MA00060429FB3600XTB
Qty:
Part #:702801
- 3/8in Jamesbury Clincher Series 2000 2-Piece Threaded Ball Valve. Brass body with brass ball and stem. Seats and seals are PTFE. Assembled dry, no silicone. Jamesbury Part # MA0010758 211100TTC061
Qty:
Part #:804337
- Boss® Clamp 2 Bolt Type, 2 Gripping Fingers Attributes
Weight
0.25 lb
Material
Global Investment Cast Carbon Steel
Torque
6 ft. lbs.
Hose ID
3/8" (9.5 mm)
Hose OD To
56/64" (22.3 mm)
Hose OD From
44/64" (17.46 mm)
$
7.17
Qty:
Part #:700304
- Female NPTF x Hose Barb Attributes
Weight
0.063 lb
Material
Brass
Female Thread
NPTF
Length
1.66"
Hose ID
3/8"
Hex
3/4"
Female Thread Size
3/8"
$
2.44
Qty:
Part #:503686
- 3/8" Shank Diameter Eyebolts Plain Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Plain pattern eyebolts must never be used to lift an angular load
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:804346
- Air King® 2-Lug Hose End Attributes
Weight
0.425 lb
Size
3/8"
Material
Iron, global investment cast
Pressure Rating Metric
1 MPa
Seal
Rubber
Pressure Rating
150 PSI
$
7.29
Qty:
Part #:810243
- 5 1/2" Cold Chisels
The most commonly used chisels in the chisel line
For cutting, shaping and removing metal softer than the cutting edge of the chisel
Qty:
Part #:512587
- Steel 3500 Male Nipple Attributes
Weight
0.13 lb
Material
Zinc Plated Steel
Male Thread
NPT
Hose Size
3/8"
Male Thread Size
3/8"
Pressure Rating
600 PSI at 70°F (21°C)
$
7.06
Qty:
Part #:506181
- Steel 3500 Female Nipple Attributes
Weight
0.125 lb
Material
Zinc Plated Steel
Female Thread
NPT
Hose Size
3/8"
Pressure Rating
600 PSI at 70°F (21°C)
Female Thread Size
3/8"
$
12.01
Qty:
Part #:503141
- Air King® 2-Lug Male NPT End Attributes
Weight
0.52 lb
Size
3/8"
Material
Iron
Pressure Rating Metric
1 MPa
Seal
Rubber
Pressure Rating
150 PSI
$
7.41
Qty:
Part #:505943
- Air King® 2-Lug Female NPT End Attributes
Weight
0.55 lb
Size
3/8"
Material
Iron
Pressure Rating Metric
1 MPa
Seal
Rubber
Pressure Rating
150 PSI
$
7.32
Qty:
Part #:810313
- 5" Center Punches
Pierces or marks work by indentation for starting pilot drills in metal or other materials
Qty:
Part #:500372
- 3/8" 12-Point SAE SUPERCOMBO® Combination Wrench
&bull SUPERCOMBO® open end has specially designed grooves that direct wrench force away from fastener corners
&bull SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points
&bull Meets or exceeds AErospace specification AS 954 for 12 point fasteners (as defined by AS 870) to provide accurate torque/tension relationship for precision application
&bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy
&bull Box and open end openings are identical
Qty:
Part #:501575
- 3/4" Drive 12-Point SAE 2-3/16" Shallow Socket
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for quick engagement on both 6 and 12 point fasteners
Qty:
Part #:509576
- 3/8 X 3" Nutdriver Cushion GRIP
Hollow shaft accommodates long bolts or studs
Precision machined socket end
Cushion grip handle for comfort
Size imprinted on color coded ends for easy identification
Qty:
Part #:810224
- 3/8" Drive SAE 3/8" Standard Length Hex Bit Socket
&bull All tools are professional quality, made of high-grade chrome vanadium steel
&bull Sockets feature SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Metal tool box made for years of rugged use
Qty:
Displaying: 1 - 24 of 44 Matching Items