.001in
Electrical Equipment
View:
Active Filters :
- Main Category: Electrical Equipment
- Length: .001in 4ft 2.1in 1.105in
Part #:302114
- Features Separate overload and short-circuit elements provide time delay for sizing as close as 125% of motor FLA 2:
- 1 selective coordination amp ratio (within the Cooper Bussmann RK5 fuse family) prevents overcurrent events from opening upstream Fusetron fuses Insulated end caps for 225A-600A fuses reduces exposure to live parts and extends air gap to distance between blades of adjacent mounted fuses or to housing
Qty:
Part #:302085
- Features Separate overload and short-circuit elements provide time delay for sizing as close as 125% of motor FLA 2:
- 1 selective coordination amp ratio (within the Cooper Bussmann RK5 fuse family) prevents overcurrent events from opening upstream Fusetron fuses Insulated end caps for 225A-600A fuses reduces exposure to live parts and extends air gap to distance between blades of adjacent mounted fuses or to housing
Qty:
closeout
$5.93 MSRP
$
4.93
Qty:
closeout
$14.79 MSRP
$
12.31
Qty:
closeout
$19.41 MSRP
$
16.16
Qty:
Part #:311647
- Features Separate overload and short-circuit elements provide time delay for sizing as close as 125% of motor FLA 2:
- 1 selective coordination amp ratio (within the Cooper Bussmann RK5 fuse family) prevents overcurrent events from opening upstream Fusetron fuses Insulated end caps for 225A-600A fuses reduces exposure to live parts and extends air gap to distance between blades of adjacent mounted fuses or to housing
Qty:
Part #:302795
- Non-NEMA 3 Wire Plug, Yellow
Quick-thread assembly screws and cord-grip screws come backed-out, ready-to-wire.
Industrial-strength, brass alloy plug blades and connector contacts resist heat rise, provide excellent conductivity.
Raised ribs provide non-slip gripping profile for turning to lock and unlock.
Double dovetail design provides superior protection against cord pull-out forces.
Impact- and corrosion-resistant durable nylon 6/6 shell material.
Rounded back contour reduces snags and hang-ups on the job site.
Scallop shell design provides non-slip gripping surface for insertion and withdrawal.
Visible stamped NEMA configuration and device rating.
New-design external cord grips provide visible assurance of safe and proper cord retention.
Integral flexible rubber cord grommet conforms to and seals around SO cord to provide protection from oils, water, or chips entering wiring chamber.
Qty:
Part #:539-46-601
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 1/16" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:539-46-602
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 3/32" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:539-46-604
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 3/16" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:808975
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 1/8" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Part #:306687
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 5/16" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
$
22.76
Qty:
Part #:803691
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 1/2" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:806554
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 1/4" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:539-46-609
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 3/4" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Displaying: 1 - 17 of 17 Matching Items