14in
Electrical Equipment
View:
Active Filters :
- Main Category: Electrical Equipment
- Length: 14in 50ft .56in 4.563in
$
60.26
Qty:
Part #:303701
- One Gang Heavy Cast Aluminum Cover Duplex Receptacle Horizontal, Gray
Extremely durable for hard-use institutional applications.
Spring-loaded covers close automatically when plugs are removed.
Die-cast copper-free aluminum construction.
Stainless steel springs.
Screws and spring covers are chrome-plated brass.
Baked-on lacquer finish.
Heavy rubber gaskets provide positive seal.
All covers below are for 4 screw mounting only.
Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
CSA File Number 16807
Qty:
Part #:302084
- Features Separate overload and short-circuit elements provide time delay for sizing as close as 125% of motor FLA 2:
- 1 selective coordination amp ratio (within the Cooper Bussmann RK5 fuse family) prevents overcurrent events from opening upstream Fusetron fuses Insulated end caps for 225A-600A fuses reduces exposure to live parts and extends air gap to distance between blades of adjacent mounted fuses or to housing
Qty:
Part #:302093
- Features Separate overload and short-circuit elements provide time delay for sizing as close as 125% of motor FLA 2:
- 1 selective coordination amp ratio (within the Cooper Bussmann RK5 fuse family) prevents overcurrent events from opening upstream Fusetron fuses Insulated end caps for 225A-600A fuses reduces exposure to live parts and extends air gap to distance between blades of adjacent mounted fuses or to housing
Qty:
Part #:302101
- Features Separate overload and short-circuit elements provide time delay for sizing as close as 125% of motor FLA 2:
- 1 selective coordination amp ratio (within the Cooper Bussmann RK5 fuse family) prevents overcurrent events from opening upstream Fusetron fuses Insulated end caps for 225A-600A fuses reduces exposure to live parts and extends air gap to distance between blades of adjacent mounted fuses or to housing
Qty:
Part #:302863
- Basic Protection 250V (NON) and 600V (NOS), 1/8-600A General Purpose Fuses
Qty:
Part #:306503
- Features Separate overload and short-circuit elements provide time delay for sizing as close as 125% of motor FLA 2:
- 1 selective coordination amp ratio (within the Cooper Bussmann RK5 fuse family) prevents overcurrent events from opening upstream Fusetron fuses Insulated end caps for 225A-600A fuses reduces exposure to live parts and extends air gap to distance between blades of adjacent mounted fuses or to housing
Qty:
Part #:310293
- 50' Blued-Steel&trade Replacement Fish Tape
Perfect for longer conduit runs, this fish tape boasts the highest tensile strength, and highest grade carbon steel for professional durability and reliability. The Blued-Steel&trade also provides rust and corrosion resistance for longer life. The Tuff-Grip&trade Pro case and handle are impact resistant, while the unique design keeps the wire inside the case, even after a long fall. Multiple width, length and eyelet options are available for ease of use for any application. Replacement tapes also available.
Replacement Tape - No Case
Laser etched in 12 in. increments to provide instant conduit length (Tuff-Grip&trade Pro models only)
Unique "blued" finish is non-oily and resists rust
Industry's straightest wire
Stiffer for long runs
Tensile strength 1,600 lbs.
Qty:
Part #:194-FRN-R-8/10
- Eaton Bussmann series FRN-R fuse, 0.8 A, Dual, Class RK5, Non-indicating, Ferrule end x ferrule end, 8 sec at 500%, 200 kAIC at 250 V20 kAIC at 125 Vdc, Standard, 250 V, 125 Vdc
Qty:
Part #:306674
- Cable Tie, 14", 50 lb., UV Black, 100/Bag
Agency Compliant
UL Approved, CSA Approved, Mil-Spec Approved, RoHs Compliant Products
Quality Construction
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
UL Listed, CSA Listed, Mil-Spec Approved, RoHs Compliant
Quality construction
Low insertion force
No burrs or sharp edges
Stepped tail gripper
Angled tail
$
38.35
BAG
Qty:
Displaying: 1 - 10 of 10 Matching Items