17in
Electrical Equipment
View:
Active Filters :
- Main Category: Electrical Equipment
- Length: 17in .56in 1.81in 3.10in
Qty:
Part #:307236
- 15A, 125V Rubber Dust-Tight Connector, Yellow
Rubber body construction stands up to impacts, oils, chemicals, heat, and weather.
Floating blades allow self-alignment with contacts for a firm, even electrical connection.
Terminal screws backed-out, ready-to-wire, saving time and money.
Nickel-plated blades and contacts for long-lasting, superior corrosion resistance.
Quick-drive assembly screws allow for fast installation, saving time and money.
Self-centering cord clamps provide superior strain relief.
For covering patents, see www.legrand.us/patents.
CSA File Number 701645
Qty:
Part #:302084
- Features Separate overload and short-circuit elements provide time delay for sizing as close as 125% of motor FLA 2:
- 1 selective coordination amp ratio (within the Cooper Bussmann RK5 fuse family) prevents overcurrent events from opening upstream Fusetron fuses Insulated end caps for 225A-600A fuses reduces exposure to live parts and extends air gap to distance between blades of adjacent mounted fuses or to housing
Qty:
Part #:302093
- Features Separate overload and short-circuit elements provide time delay for sizing as close as 125% of motor FLA 2:
- 1 selective coordination amp ratio (within the Cooper Bussmann RK5 fuse family) prevents overcurrent events from opening upstream Fusetron fuses Insulated end caps for 225A-600A fuses reduces exposure to live parts and extends air gap to distance between blades of adjacent mounted fuses or to housing
Qty:
Part #:302101
- Features Separate overload and short-circuit elements provide time delay for sizing as close as 125% of motor FLA 2:
- 1 selective coordination amp ratio (within the Cooper Bussmann RK5 fuse family) prevents overcurrent events from opening upstream Fusetron fuses Insulated end caps for 225A-600A fuses reduces exposure to live parts and extends air gap to distance between blades of adjacent mounted fuses or to housing
Qty:
Part #:302863
- Basic Protection 250V (NON) and 600V (NOS), 1/8-600A General Purpose Fuses
Qty:
Part #:306503
- Features Separate overload and short-circuit elements provide time delay for sizing as close as 125% of motor FLA 2:
- 1 selective coordination amp ratio (within the Cooper Bussmann RK5 fuse family) prevents overcurrent events from opening upstream Fusetron fuses Insulated end caps for 225A-600A fuses reduces exposure to live parts and extends air gap to distance between blades of adjacent mounted fuses or to housing
Qty:
Part #:307240
- Rubber Locking Connector, Yellow
Rubber body construction stands up to impacts, oil, chemicals, heat, and weather.
Floating blades allow self-alignment with contacts and reduce stress on blades and contacts.
Neoprene grommet keeps out contaminants at cord entrance.
Terminal screws come backed out -- ready-to-wire.
Nickel-plated blades and connectors provide an extra measure of corrosion resistance.
Closure cap on watertight model forms a seal to keep out contaminants when connector is not in use.
Multiple seals between plug and connector on watertight version protects electrical connection from contaminants.
CSA File Number 701645
Qty:
Part #:194-FRN-R-8/10
- Eaton Bussmann series FRN-R fuse, 0.8 A, Dual, Class RK5, Non-indicating, Ferrule end x ferrule end, 8 sec at 500%, 200 kAIC at 250 V20 kAIC at 125 Vdc, Standard, 250 V, 125 Vdc
Qty:
Part #:539-IT5LH-L
- Cable Tie, 17", 120 lb., Natural, 50/Bag
Quality Construction
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
UL Compliant, CSA Compliant, MIL-Spec Approved, RoHs Compliant
One-piece design for added strength
Tapered thin tip reduces initial friction
Smooth corners provide added safety
Tapered tall grip assures positive threading
Stepped tail allows for easier grabbing
Qty:
Displaying: 1 - 10 of 10 Matching Items