3/4in
Electrical Equipment
View:
Active Filters :
- Main Category: Electrical Equipment
- Length: 3/4in 4ft 1.812in 3.281in
Part #:307080
- Appleton RB Series reducers are explosionproof and dust-ignitionproof. They are designed to reduce conduit entries to a smaller size and are used in threaded rigid and IMC conduit systems.
$
2.04
Qty:
Part #:307244
- Appleton™ Type RW steel reducing washers are used to reduce the size of a knockout or slip hole in a sheet metal enclosure to a smaller trade size..
$
0.44
Qty:
Part #:304511
- 15A NEMA L515 Single Receptacle
Compact, impact-resistant nylon face and body are ultrasonically welded together for unrivaled strength.
Face color coding by voltage facilitates locating and mating of proper devices.
One piece, high-grade brass contacts offer excellent conductivity and heat-rise resistance.
Clearly marked NEMA configuration, rating, and third-party listing on each unit's face.
Single-piece, solid brass mounting strap is free of easily loosened rivets found on other brands.
Side and external screw-pressure-plate back wire capability.
Accepts #14 - #10 AWG.
cULus ListingNumber 140596
Qty:
Part #:301461
- Non-NEMA 3 Wire Connector, Yellow
Quick-thread assembly screws and cord-grip screws come backed-out, ready-to-wire.
Industrial-strength, brass alloy plug blades and connector contacts resist heat rise, provide excellent conductivity.
Raised ribs provide non-slip gripping profile for turning to lock and unlock.
Double dovetail design provides superior protection against cord pull-out forces.
Impact- and corrosion-resistant durable nylon 6/6 shell material.
Rounded back contour reduces snags and hang-ups on the job site.
Scallop shell design provides non-slip gripping surface for insertion and withdrawal.
Visible stamped NEMA configuration and device rating.
New-design external cord grips provide visible assurance of safe and proper cord retention.
Integral flexible rubber cord grommet conforms to and seals around SO cord to provide protection from oils, water, or chips entering wiring chamber.
Qty:
Part #:539-46-601
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 1/16" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:539-46-602
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 3/32" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:539-46-604
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 3/16" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:808975
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 1/8" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Part #:306687
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 5/16" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:803691
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 1/2" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:806554
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 1/4" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:539-46-609
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 3/4" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Displaying: 1 - 12 of 12 Matching Items