Bussmann Division
Electrical Equipment
View:
Active Filters :
- Main Category: Electrical Equipment
- Brand: Bussmann Division Klein Pass & Seymour (Legrand)
- Color: Red
Part #:505102
- Cable Cutter
&bull High-leverage design for exceptional cutting capability of 4/0 aluminum, 2/0 soft copper, 100-pair 24 AWG communications cable&bull Precision, one-hand shearing action&bull Cable-gripping shear-type jaws&bull Perfect for working in confined spaces&bull Can be carried in most tool pouches&bull Beveled jaw tips provide proper mating and shearing action, which protects leading jaw edges&bull Through-hardened (not case-hardened) for longer-lasting cutting surfaces&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Custom, US-made tool steel&bull Has a jaw capacity of 1.06'' (26.9 mm)
Qty:
Part #:504785
- End-Cutting Pliers, 8-Inch
&bull Wide throat clearance for clean, even, close range cutting of wire or nails&bull High-leverage design provides greater cutting power at the knives than other plier designs&bull Extended handles for longer reach and increased leverage&bull Hot-riveted joint for smooth action and no handle wobble&bull Forged steel for maximum durability&bull Made in the USA
Qty:
Part #:508516
- Multi Tool, Stripper, Crimper, Wire Cutter, 8-22 AWG
&bull Two wire cutters double the utility of this tool&bull Crimps 7-8 mm insulated and non-insulated terminals, lugs and splices&bull Cuts and strips 8-22 AWG solid and 10-26 AWG stranded wire&bull Cleanly shears bolts&bull Pivot nut adjusts tension&bull Full-sized, plastic-covered cushioned handles for comfort&bull Wire cutter in nose and below pivot&bull Crimping dies color-coded for easy identification
Qty:
Part #:194-ATC-10
- Motor fuse-link, medium voltage, 125 A, AC 3.6 kV, 76 x 359 mm, back-up, BS, with striker
Qty:
Part #:806744
- Diagonal Cutting Pliers, Semi-Flush, 6-Inch
&bull Trims plastic or printed circuit boards&bull Spring-loaded for self-opening action&bull Short jaws and beveled cutting edges permit close cutting of wire&bull Induction-hardened cutting knives for long life&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Plastic-dipped handles for comfort and ease of identification&bull Custom, US-made tool steel
Qty:
Part #:303194
- Industrial Extra Heavy Duty Specification Grade Switch, Lighted When On, Back and Side Wire, Red
External screw-pressure-plate back and side wired. Accepts #14 - #10 AWG copper or copper-clad conductors.
Heavy-gauge one-piece copper alloy contact arm virtually eliminates contact bounce.
Cam controls fast ''make'' and positive ''break'' to minimize arcing.
Heavy-duty bumper pads for quiet operation.
High strength thermoplastic polycarbonate toggle.
Back body made of glass-reinforced nylon.
Locking support provides resistance to face and back body separation.
Oversized silver alloy contacts for long life and better heat dissipation.
Grounding terminal is standard.
Shallow design for ease of installation.
Strap nickel-plated steel with integral ground.
Auto-ground clip assures positive ground.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
cULus ListingNumber 140597
Qty:
Part #:315446
- Heavy Duty Hospital Grade Compact Design Receptacles, Back and Side Wire, 20A, 125V, Red
Impact-resistant nylon face.
One-piece heat-treated triple-wipe brass power contacts.
Easily accessible break-off line contact connecting tab for split circuit wiring.
Corrosion-resistant, zinc-plated steel strap is locked in.
Internal screw-pressure-plate back wire and side wire line terminals accept #14 #10 AWG copper or copper-clad conductors.
High strength thermoplastic back body.
Back wire holes allow entry of conductor insulation partially into body but not into wiring compartment.
Auto-ground clip assures positive ground.
Compact design for easy installation.
Tri-drive terminal and mounting screws.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
cULus ListingNumber 140596
Qty:
Part #:303195
- Extra Heavy Duty Hospital Grade Receptacles, Back and Side Wire, 20A, 125V, Red
One-piece nickel-plated brass mounting strap with integral ground.
Strap tabs wrap around and lock down on face to prevent strap from separating from face and back body.
Two drive screws anchor strap to back body and face.
Exclusive patented feature, circuit label on face allows permanent circuit identification.
.040 inch thick, nickel-plated brass, triple-wipe power contacts for lasting retention.
Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring.
Impact-resistant nylon face and back body.
Oversized #10 deep tri-drive head brass terminal and ground screws.
Exclusive patented feature, external screw-pressure-plate back wire clamp on ground terminal for faster, easier installation.
External nickel-plated screw-presure-plate back wire clamps with #10 brass terminal screws for visual assurance of a good connection.
Line terminals accept #14 - #10 AWG stranded or solid copper-clad conductors.
Auto-ground clip assures positive ground.
Illuminated version features exclusive LED lamp with solder connection for long durable life (10-12 years).
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
cULus ListingNumber 140596
Qty:
closeout
$49.66 MSRP
$
34.76
Part #:500025
- CLOSEOUTS Only 1 Left!
- Diagonal Cutting Pliers, Heavy-Duty, Tapered Nose, 7-Inch
Diagonal Cutters have heavy-duty tapered nose design
Pliers with 1-Inch jaws easily reach into confined spaces
Short jaws and beveled cutting edges permit close cutting of wire
Induction-hardened, standard cutting knives for long life
Forged in the USA with custom, US-made tool steel
Hot-riveted joint ensures smooth action and no handle wobble
Handform handles for comfort and ease of identification
These Heavy Duty, Diagonal-Cutting Pliers come with a 1-Inch tapered nose design. The pliers are made of US-made steel and have induction hardened beveled cutting edges for added durability. They also have plastic dipped handles and a hot-riveted joint for added comfort and no handle wobble while working.
Qty:
Part #:803340
- Multi Tool, 6-in-1 Multi-Purpose Stripper, Crimper, Wire Cutter
&bull Cuts and strips 8-22 AWG solid and 10-26 AWG stranded wire with built-in, knife-type wire cutter&bull Cleanly shears machine screws&bull Measures machine screw sizes&bull Crimps insulated terminals and connectors&bull Gauges wire sizes&bull Plastic covered handles for comfort
Qty:
Displaying: 1 - 10 of 10 Matching Items