Cast
Electrical Equipment
View:
Active Filters :
- Main Category: Electrical Equipment
- Material: Cast Die-cast Polycarbonate
Part #:304966
- Extremely durable for hard-use institutional applications. Spring-loaded covers close automatically when plugs are removed. Die-cast copper-free aluminum construction. Stainless steel springs. Screws and spring covers are chrome-plated brass. Baked-on lacquer finish. Heavy rubber gaskets provide positive seal. All covers below are for 4 screw mounting only. Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
$
12.35
Qty:
Part #:308442
- 60A Power Interrupting Receptacle, Diecast with Lift Lid Enclosure
$
964.68
Qty:
Part #:303701
- One Gang Heavy Cast Aluminum Cover Duplex Receptacle Horizontal, Gray
Extremely durable for hard-use institutional applications.
Spring-loaded covers close automatically when plugs are removed.
Die-cast copper-free aluminum construction.
Stainless steel springs.
Screws and spring covers are chrome-plated brass.
Baked-on lacquer finish.
Heavy rubber gaskets provide positive seal.
All covers below are for 4 screw mounting only.
Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
CSA File Number 16807
Qty:
$
93.89
Qty:
Part #:307241
- NightFox&trade Stem Mount Electronic Photocontrol, 120-277 V
NightFox&trade electronic photocontrols permanently install on outdoor electrical boxes or outdoor lighting fixtures. Ideal for LED fixtures with long-life expectations. ½&rdquo-14 NPSM threaded stem fits standard outlet boxes and wall packs with a minimum installation hole size of 7/8&rdquo diameter. Come with 9" wire leads.
$
22.40
Qty:
Part #:309735
- NightFox&trade Stem and Swivel Mount Electronic Photocontrol, 120-277 V
NightFox&trade electronic photocontrols permanently install on outdoor electrical boxes or outdoor lighting fixtures. Ideal for LED fixtures with long-life expectations. ½&rdquo-14 NPSM threaded stem fits standard outlet boxes and wall packs with a minimum installation hole size of 7/8&rdquo diameter. Come with 9" wire leads.
$
24.48
Qty:
Part #:300310
- Single Gang Cast While-In-Use Cover, Gray
Compliant with National Electric Code (NEC) Section 406.8(B)(1) for wet locations.
UL listed for ''Extra-Duty'' applications.
Heavy cast aluminum construction.
Corner hinge allows for vertical or horizontal mounting.
Device inserts allow for multiple device types.
Install without removing electrical device thanks to keyed mounting holes.
Cord flap gaskets inhibit water splash and insects, all gaskets are factory installed.
Accepts padlocks.
Qty:
$
83.38
Qty:
Part #:301181
- 30A Power Interrupting Receptacle Angled, 3/4 inch Tap for Conduit, Die Cast
Quality Materials, durability, and time-tested design
Qty:
Part #:312425
- Stem Mount Thermal Photocontrol, 208-277 V
These photocontrols install on standard outdoor light fixtures and electrical boxes with 1&frasl2"-14 NPSM thread or 7&frasl8" knock-out holes for dusk-to-dawn ON/OFF control of outdoor lighting.
$
28.45
Qty:
Part #:308971
- NightFox&trade Button Electronic Photocontrol, 120-277 V
NightFox&trade electronic photocontrols permanently install on outdoor electrical boxes, in-wall boxes or outdoor lighting fixtures. Ideal for LED fixtures with long-life expectations. Mounts internally to an enclosure with a minimum installation hole size of 5/8&rdquo diameter. Comes with 9" wire leads.
$
21.59
Qty:
Part #:308196
- NightFox&trade Wall Mount Electronic Photocontrol, 120-277 V
NightFox&trade electronic photocontrols permanently install on standard single-gang in-wall boxes. Standard wall plate included. Ideal for LED fixtures with long-life expectations.
$
25.76
Qty:
Part #:302593
- One Gang Heavy Cast Aluminum Cover Decorator/GFCI Horizontal, Gray
Extremely durable for hard-use institutional applications.
Spring-loaded covers close automatically when plugs are removed.
Die-cast copper-free aluminum construction.
Stainless steel springs.
Screws and spring covers are chrome-plated brass.
Baked-on lacquer finish.
Heavy rubber gaskets provide positive seal.
All covers below are for 4 screw mounting only.
Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
CSA File Number 16807
Qty:
Part #:302594
- One Gang Heavy Cast Aluminum Cover Decorator/GFCI Vertical, Gray
Extremely durable for hard-use institutional applications.
Spring-loaded covers close automatically when plugs are removed.
Die-cast copper-free aluminum construction.
Stainless steel springs.
Screws and spring covers are chrome-plated brass.
Baked-on lacquer finish.
Heavy rubber gaskets provide positive seal.
All covers below are for 4 screw mounting only.
Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
CSA File Number 16807
Qty:
Part #:303252
- Cast Weatherproof Two Gang Cover, Gray
Broad line of two gang covers for switches, receptacles, GFCIs, and power outlets.
Baked-on electrostatic, polyester, powder paint for superior scratch and corrosion resistance.
Heavy-duty die-cast zinc.
Stainless steel springs.
All covers have 2 self-closing lids.
Covers comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
Qty:
Part #:303216
- Cast Weatherproof Cover Single Pole Toggle Switch, Gray
Broad line of single gang covers for switches and GFCIs.
Baked-on electrostatic, polyester, powder paint for superior scratch and corrosion resistance.
Heavy-duty die-cast zinc.
Stainless steel springs.
Covers comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
Qty:
Part #:566-K4141C
- Stem Mount Thermal Photocontrol, 120 V, 25 A
These photocontrols install on standard outdoor light fixtures and electrical boxes with 1&frasl2"-14 NPSM thread or 7&frasl8" knock-out holes for dusk-to-dawn ON/OFF control of outdoor lighting.
$
33.82
Qty:
Part #:829-RWP262W
- radiant® Two-Gang Screwless Wall Plate White
Adds a touch of sophistication to any space with a sleek, screwless face and low-profile. Sized to fit even over ragged openings for a seamless look.
Designed to exclusively fit the designer switches, dimmers and outlets from the radiant® Collection, snapping into place with ease.
Ensures proper plate positioning with subplate screws.
Molded of highly durable polycarbonate, Wall Plates from the radiant® Collection are available in an array of classic colors and metallic finishes.
Qty:
Part #:829-RWP263W
- radiant® Three-Gang Screwless Wall Plate
Adds a touch of sophistication to any space with a sleek, screwless face and low-profile. Sized to fit even over ragged openings for a seamless look.
Designed to exclusively fit the designer switches, dimmers and outlets from the radiant® Collection, snapping into place with ease.
Ensures proper plate positioning with subplate screws.
Molded of highly durable polycarbonate, Wall Plates from the radiant® Collection are available in an array of classic colors and metallic finishes.
Qty:
Part #:829-RWP264W
- radiant® Four-Gang Screwless Wall Plate, White
Adds a touch of sophistication to any space with a sleek, screwless face and low-profile. Sized to fit even over ragged openings for a seamless look.
Designed to exclusively fit the designer switches, dimmers and outlets from the radiant® Collection, snapping into place with ease.
Ensures proper plate positioning with subplate screws.
Molded of highly durable polycarbonate, Wall Plates from the radiant® Collection are available in an array of classic colors and metallic finishes.
Qty:
Part #:829-RWP26W
- radiant® One-Gang Screwless Wall Plate
Adds a touch of sophistication to any space with a sleek, screwless face and low-profile. Sized to fit even over ragged openings for a seamless look.
Designed to exclusively fit the designer switches, dimmers and outlets from the radiant® Collection, snapping into place with ease.
Ensures proper plate positioning with subplate screws.
Molded of highly durable polycarbonate, Wall Plates from the radiant® Collection are available in an array of classic colors and metallic finishes.
Qty:
Part #:566-K4021C
- Button Thermal Photocontrol, 120 V
These photocontrols install within lighting fixtures, post lamps, or in-wall boxes to provide dusk-to-dawn ON/OFF control of outdoor lighting.
$
13.82
Qty:
Part #:566-K4221C
- Stem and Swivel Mount Thermal Photocontrol, 120 V
These photocontrols are provided with a swivel arm for easy and flexible installation to standard outdoor light fixtures or electrical boxes.
$
26.20
Qty:
Part #:566-WP1010HMXD
- Extra-Duty Die-Cast In-Use Weatherproof Cover, Single-Gang, Hrz, 3.125" Gray
Die-Cast In-Use Aluminum Weatherproof Covers are extra-duty rated and easy to install. Heavy-duty die-cast aluminum construction ensures long-lasting durability. Covers come with a gasket, mounting screws, base, cover assembly and inserts to meet the needs of a variety of applications.
$
22.32
Qty:
Displaying: 1 - 24 of 25 Matching Items