Benders
Electrical Equipment
View:
Active Filters :
- Main Category: Electrical Equipment
- Electrical Tools: Benders Circuit Tester Modular Plug Crimp Tool
Part #:302514
- Bender Handle, 1" x 44"
IDEAL® Iron conduit bender head with handle has ductile iron construction for exceptional durability and rugged construction that withstands a lifetime of heavy use. Baked-on blue enamel finish on the handle resists corrosion and enhances visibility. Bends conduit pipes to fit around any corner, ceiling, wall or irregularly shaped passageways. It features precision marks locating degree scale, star, arrow and rim notch for perfect bends every time. Bender head has easy visibility markings that are raised and cast into both sides. It has a deeply serrated steps and grooved internal hook surface that prevents slippage, while applying high leverage. It is heat treated for extra strength and reinforced at stress points for longer life. Uses the Benfield bending system, which is standard to the industry, resulting in accurate and dependable bends. Includes convenient bending guide as a reference for basic bends. Four sizes provided to accommodates four sizes of pipe. Available complete with head and handle both included, as well as the handle and head each sold separately as a replacement part.
Withstands a lifetime of heavy use
Exceptional, durable, materials for extra strength, and reinforced at stress points for longer life
Ductile iron material is stronger than malleable iron or aluminum
Qty:
Part #:302987
- 120V AC E-Z Check® Plus GFCI Circuit Tester
Tests for correct wiring, open ground, reverse polarity, open hot, open neutral, hot on neutral, hot and ground reversed with open hot in 3 wire, 120 VAC circuits
Simulates ground fault for testing GFCI
No-slip ergonomic design maximizes comfort
Premium neon lamps prevent false readings
Tough, impact-resistant case
2-year warranty
$
65.40
Qty:
Part #:302507
- Ductile Iron Bender Head, 1/2" EMT
IDEAL® Iron conduit bender head with handle has ductile iron construction for exceptional durability and rugged construction that withstands a lifetime of heavy use. Baked-on blue enamel finish on the handle resists corrosion and enhances visibility. Bends conduit pipes to fit around any corner, ceiling, wall or irregularly shaped passageways. It features precision marks locating degree scale, star, arrow and rim notch for perfect bends every time. Bender head has easy visibility markings that are raised and cast into both sides. It has a deeply serrated steps and grooved internal hook surface that prevents slippage, while applying high leverage. It is heat treated for extra strength and reinforced at stress points for longer life. Uses the Benfield bending system, which is standard to the industry, resulting in accurate and dependable bends. Includes convenient bending guide as a reference for basic bends. Four sizes provided to accommodates four sizes of pipe. Available complete with head and handle both included, as well as the handle and head each sold separately as a replacement part.
Withstands a lifetime of heavy use
Exceptional, durable, materials for extra strength, and reinforced at stress points for longer life
Ductile iron material is stronger than malleable iron or aluminum
Qty:
Part #:302510
- Ductile Iron Bender Head - 3/4" EMT, 1/2" Rigid & 1/2" IMC
IDEAL® Iron conduit bender head with handle has ductile iron construction for exceptional durability and rugged construction that withstands a lifetime of heavy use. Baked-on blue enamel finish on the handle resists corrosion and enhances visibility. Bends conduit pipes to fit around any corner, ceiling, wall or irregularly shaped passageways. It features precision marks locating degree scale, star, arrow and rim notch for perfect bends every time. Bender head has easy visibility markings that are raised and cast into both sides. It has a deeply serrated steps and grooved internal hook surface that prevents slippage, while applying high leverage. It is heat treated for extra strength and reinforced at stress points for longer life. Uses the Benfield bending system, which is standard to the industry, resulting in accurate and dependable bends. Includes convenient bending guide as a reference for basic bends. Four sizes provided to accommodates four sizes of pipe. Available complete with head and handle both included, as well as the handle and head each sold separately as a replacement part.
Withstands a lifetime of heavy use
Exceptional, durable, materials for extra strength, and reinforced at stress points for longer life
Ductile iron material is stronger than malleable iron or aluminum
Qty:
Part #:302511
- Ductile Iron Bender 74-003 w/Handle - 1" EMT, 3/4 in. Rigid & 3/4" IMC
IDEAL® Iron conduit bender head with handle has ductile iron construction for exceptional durability and rugged construction that withstands a lifetime of heavy use. Baked-on blue enamel finish on the handle resists corrosion and enhances visibility. Bends conduit pipes to fit around any corner, ceiling, wall or irregularly shaped passageways. It features precision marks locating degree scale, star, arrow and rim notch for perfect bends every time. This conduit bender head has easy visibility markings that are raised and cast into both sides. It has a deeply serrated steps and grooved internal hook surface that prevents slippage, while applying high leverage. It is heat treated for extra strength and reinforced at stress points for longer life. Uses the Benfield bending system, which is standard to the industry, resulting in accurate and dependable bends. Includes convenient bending guide as a reference for basic bends. Four sizes provided to accommodates four sizes of pipe. Available complete with head and handle both included, as well as the handle and head each sold separately as a replacement part.
Withstands a lifetime of heavy use
Exceptional, durable, materials for extra strength, and reinforced at stress points for longer life
Ductile iron material is stronger than malleable iron or aluminum
Qty:
Part #:302512
- Ductile Iron Bender Head - 1-1/4" EMT, 1" Rigid, 1" IMC
IDEAL® Iron conduit bender head with handle has ductile iron construction for exceptional durability and rugged construction that withstands a lifetime of heavy use. Baked-on blue enamel finish on the handle resists corrosion and enhances visibility. Bends conduit pipes to fit around any corner, ceiling, wall or irregularly shaped passageways. It features precision marks locating degree scale, star, arrow and rim notch for perfect bends every time. Bender head has easy visibility markings that are raised and cast into both sides. It has a deeply serrated steps and grooved internal hook surface that prevents slippage, while applying high leverage. It is heat treated for extra strength and reinforced at stress points for longer life. Uses the Benfield bending system, which is standard to the industry, resulting in accurate and dependable bends. Includes convenient bending guide as a reference for basic bends. Four sizes provided to accommodates four sizes of pipe. Available complete with head and handle both included, as well as the handle and head each sold separately as a replacement part.
Withstands a lifetime of heavy use
Exceptional, durable, materials for extra strength, and reinforced at stress points for longer life
Ductile iron material is stronger than malleable iron or aluminum
Qty:
Part #:302513
- Bender Handle, 3/4" x 38"
IDEAL® Aluminum conduit bender is made of lightweight aluminum construction for easy handling. Bends conduit pipes to fit around any corner, ceiling, wall or irregularly shaped passageways. It features precision marks locating degree scale, star, arrow and rim notch for perfect bends every time. Bender head has easy visibility markings that are raised and cast into both sides. It has a deeply serrated steps and grooved internal hook surface that prevents slippage, while applying high leverage. It is heat treated for extra strength and reinforced at stress points for longer life. Baked-on blue enamel finish on the handle resists corrosion and enhances visibility. Uses the Benfield bending system, which is standard to the industry. Includes convenient bending guide as a reference for basic bends. Two sizes accommodate 1/2 in. and 3/4 in. conduit. Available complete with head and handle, as well as the handle and head each sold separately as a replacement part.
Withstands a lifetime of heavy use
Exceptional, durable, materials for extra strength, and reinforced at stress points for longer life
Ductile iron material is stronger than malleable iron or aluminum
Qty:
Part #:307697
- 100' S-Class® Fiberglass Fish Tape w/Non-Conductive Eyelet & Rapid-Pak® Case
S-Class® Fiberglass Fish Tapes are non-conductive, and the best choice when working near live circuits. A high quality fiberglass core provides column strength for optimum pushing and pulling capability. Its round shape allows an omni-directional capability perfect for multiple bends, or bends that change planes. Choose from three end types metal eyelet, a leader for even better maneuverability, and a nonconductive eyelet which prevents arc flash. Offered in two case choices our standard Tuff-Grip&trade Pro, as well as our own unique Rapid-Pak® design with an easy winder knob. Available in three lengths 50 ft., 100 ft., and 200 ft. Replacement tapes also available.
3/16" diameter
Non-conductive fish tape designed for use around live circuits
Strong S-Class® fiberglass core for strength and greater pushing power
Smooth nylon jacket protects fiberglass, and provides smooth surface for great handling around bends
Round shape provides omni-directional pushing through tough bends
Pulling strength 500 lbs.
Qty:
Part #:539-30-495
- FT-45&trade Feed-Thru Modular Plug Crimp tool
Don&lsquot let it&lsquos size fool you. The NEW FT-45&trade is a simple, compact and highly effective modular plug crimp tool for installers and techs that terminate RJ-45 connectors regularly. Instead of another traditional oversized, heavy, crimp tool style loaded with features that are rarely used or that just don&lsquot work well, we took this tool in a new direction. It&lsquos built for today and tomorrow, not the past.
This tool was designed to work seamlessly with the IDEAL Feed-Thru Modular plugs, and is compatible with other feed-thru style connectors. A major benefit of Feed-Thru plugs is that they allow the individual conductors to "feed-thru" the end-face of the connector allowing the user to verify the wires are in the correct order prior to crimping the connector.
During crimping, the FT-45&trade cleanly shears the excess conductors and leaves a smooth, flat finish to the end face of the IDEAL Feed-Thru connector. No protrusions or small lengths of conductor remain beyond the plastic face of the connector. This minimizes accidental shorting of conductors or inadvertent contact in plug jacks.
Fitted with a single universal crimp cavity for RJ-45 / 8-position connectors that can be used with Feed-Thru, standard, or shielded connectors for CAT5e or CAT6. No need to carry multiple tools for terminating RJ-45's.
A custom, heavy duty cutting blade that stays sharp, has minimal flex and will last for over 2,000 cuts before it needs replacing. Replacement blades are available (30-4951).
A patent pending mechanical design that requires only 1/3 to 1/2 the hand force of traditional tools to crimp the connector - no ratchet mechanism is needed and one handed crimping is possible.
The tool is compact, 5 1/2&ldquo in length and weighs just over 1/2lb, about half the size and weight of bulkier traditional tools so it easily fits in your pocket and lightens the tool bag load.
Compact design &ndash 2/3 the size of traditional crimpers
Trims wires flush with connector end
Works on feed-thru, standard and shielded modular plugs
For CAT5e and CAT6 RJ-45 connectors
Easier plug assembly with feed-thru design
Large connector cavity window for unobstructed wire pass-thru
$
58.75
Qty:
Part #:539-30-496
- Telemaster&trade Modular Plug Crimp Tool
The Telemaster&trade is the original professional grade tool designed for everyday usage in the data and telecommunications fields by industry professionals.
The Telemaster&trade has been a best-selling tool for crimping Cat5e and Cat 6 modular plugs for over 15 years. Precision ground crimp teeth and a steel-walled body keep the connector stable and all of the moving parts aligned throughout the crimp process for a perfect crimp every time. Many general purpose tools inconsistently crimp each of the eight contacts of a modular plug, and the tool cavity can bend under crimping stresses. This results in weak conductor to pin contact points from contacts that were not fully seated. Uneven/unseated contacts can also cause damage to the mating connector port.
The Telemaster is a weight relieved, non-ratcheting version of the 30-696 Ratchet Telemaster&trade. It provides consistent quality terminations in a smaller and lighter form.
For a time-proven, reliable and best in class modular plug crimping tool, look no further than the Telemaster&trade from IDEAL.
Crimps industry standard Cat 5e/6 RJ-45 (8P8C) and RJ-11/12 (6P6C/6P4C) modular plugs
Lighter and more compact version of the 30-696 Ratchet Telemaster&trade
Precision ground contact dies evenly crimp all standard plugs to industry specifications
Multi-function tool also cuts UTP/STP and strips Cat 5e/6 round cable jackets
Available in several kits and combo packs
Crimps industry standard Cat 5e/6 RJ-45 (8P8C) and RJ-11/12 (6P6C/6P4C) modular plugs
Lighter and more compact version of the 30-696 Ratchet Telemaster&trade
Precision ground contact dies evenly crimp all standard plugs to industry specifications
Multi-function tool also cuts UTP/STP and strips Cat 5e/6 round cable jackets
Available in several kits and combo packs
Can crimp most standard shielded cat5e/6 modular plugs
Black oxide coated steel frame with cushioned handles for strength and comfort
$
62.06
Qty:
Displaying: 1 - 10 of 10 Matching Items