Greenlee
Electrical Equipment
View:
Active Filters :
- Main Category: Electrical Equipment
- Brand: Greenlee Ideal Industries Inc Parker Powers
Part #:510307
- 240' Steel Fish Tape
Oil-tempered spring steel for excellent fishing performance
Dirt-free tape finish keeps hands cleaner during use
Advanced comfort handle grip reduces fatigue
Superior rapid tape pay-out and rewind
Smaller Fish Eye with offset bend for improved fishing ability
Improved low profile tip for easy fishing through all sizes of conduit
Viewing Port gives visibility to remaining tape and ability to remove jobsite debris quickly
Rugged case design improves drop impact capability
Flared case with Grip Ridges for no slip handling
Fish tape is available in 50 FT (15
2 m), 65 FT (19
8 m), 125 FT (38
1 m) and 240 FT (73
2 m) lengths
1/8 IN, 1/4 IN and flat steel profiles to accommodate different fishing situations
$
115.80
Qty:
Part #:501682
- Slug-Buster® 1/2" Conduit Size Replacement Punch
Made in USA
Alignment Markings improve punching accuracy and productivity
Punches and dies are clearly marked for quick part identification
$
34.30
Qty:
Part #:504951
- Standard Round 1/2" - 1-1/4" Manual Knockout Set
For use with new Greenlee KRW-1 high-leverage ratchet wrench
Slug-Buster® punch profile splits slugs for easy slug removal
Knurled edge on punches for better grip
New die design optimized for widest range of materials and drivers
Easy threading - draw studs with "dog point" tip helps eliminate cross-threading.
Knockout set punches, dies and case made in the USA
Draw stud manufactured in the USA from US and global components
Laser markings for quick part identification. Alignment markings for improved accuracy.
$
299.00
Qty:
Part #:500437
- 1/2" Conduit Size Slug-Buster® Manual Knockout Set
Unique punch profile splits slugs allowing for easy slug removal
Knurled edge for better grip
Laser markings for quick part identification
Alignment markings for improved accuracy
Punch and die Made in USA
Replaces 60246
$
60.60
Qty:
Part #:500493
- 3/4" Conduit Size Slug-Buster® Manual Knockout Set
Unique punch profile splits slugs allowing for easy slug removal
Knurled edge for better grip
Knockout sets are laser marked for quick part identification
Alignment markings for improved accuracy
Punch and die Made in USA
Replaces 7211BB-3/4
$
78.75
Qty:
Part #:511006
- Digital Light Meter
Measures incandescent, fluorescent, metal halide, high-pressure sodium and halogen lamp output
Color and cosine-corrected for enhanced accuracy
Measures up to 50,000 lux
Peak and data hold means no lost measurements
Accessories included (1) 9V battery and carrying case
Lifetime Limited Warranty
$
261.55
Qty:
Part #:804724
- 1/2" EMT Hand Bender
Bends offsets in one easy operation
Insert conduit, depress handle, release and remove conduit Makes identical offsets every time for wall mounted boxes with exposed conduit Creates offset that matches the knockout in box Maximum offset of 0
.56" (9/16)
$
351.55
Qty:
Part #:501961
- Ratchet Reel Stand 28" - 46-5/8" (711 mm - 1184 mm)
Ratchet mechanism to easily raise or lower the height
Roller bearings fit in the spindle groove to keep the spindle in place and turning freely
Two stands and a spindle are required for a complete setup
$
1,085.15
Qty:
Part #:500514
- 1-1/2" Conduit Size Slug-Buster® Manual Knockout Set
Unique punch profile splits slugs allowing for easy slug removal
Knurled edge for better grip
Laser markings for quick part identification
Alignment markings for improved accuracy
Punch and die Made in USA
Replaces 7211BB-1-1/2
$
132.35
Qty:
Part #:500525
- Slug-Buster® 1/2" - 1-1/4" Manual Knockout Set
For use with new Greenlee KRW-1 high-leverage ratchet wrench
Slug-Buster® punch profile splits slugs for easy slug removal
Knurled edge on punches for better grip
knockout set features new die design optimized for widest range of materials and drivers
Laser markings for quick part identification. Alignment markings for improved accuracy
Easy threading - draw studs with "dog point" tip helps eliminate cross-threading
Punches, dies and case made in the USA
Draw stud manufactured in the USA from US and global components
$
249.00
Qty:
Part #:509382
- 4 Piece Quick Change Carbide Cutter Set
Metal cutting tool cuts stainless steel quickly and easily
Quick Change arbor allows for easy changes to cutter heads
Flange stop prevents over-drilling
Replaceable cobalt-steel pilot drill with split-point tip prevents walking
Minimum chuck size 3/8 In
$
134.70
Qty:
Part #:500252
- Pocket Multimeter, 450V
Auto-Select Mode for hassle-free use
Low impedance eliminates stray or "ghost" voltage readings
AC/DC voltage measurement
Hassle-Free, automatic measurement of voltage and resistance
Autoranging for quick, convenient measurements
Non-contact voltage detection for identifying live lines without contacting conductors
Intelligent Auto-Off for longer battery life
Low battery indicator
Resistance measurement
Audible continuity test
Frequency measurement in voltage mode
Capacitance meausurement
6000-Count LCD for high resolution
Accessories Included (1)3 V Battery (CR2032), Carrying Case
Lifetime Limited Warranty
$
61.20
Qty:
Part #:501616
- 1 Ply Spiral Wrap Twine
Ready-to-use, pre-punched hole in lid with resealable cap
Use with power fishing systems directly from the container
Power fishing tool resists tangling when dispensing
Rot and mildew resistant
Handy reusable plastic dispenser pail with handle keeps the line dry
Use to pull rope through conduit
$
96.80
Qty:
Part #:500511
- 1" Conduit Size Slug-Buster® Manual Knockout Set
Unique punch profile splits slugs allowing for easy slug removal
Knurled edge for better grip
Laser markings for quick part identification
Alignment markings for improved accuracy
Punch and die Made in USA
Replaces 7211BB-1
$
92.50
Qty:
Part #:500513
- 1-1/4" Conduit Size Slug-Buster® Manual Knockout Set
Unique punch profile splits slugs allowing for easy slug removal
Knurled edge for better grip
Laser markings for quick part identification
Alignment markings for improved accuracy
Punch and die Made in USA
Replaces 7211BB-1-1/4
$
104.50
Qty:
Part #:802876
- Conduit Die IPS - 2-1/2"
Made in the USA
Replacement Die 2-1/2" Conduit Size Die
Alignment Markings improve punching accuracy and productivity when making holes.
Punches and dies are marked with catalog numbers and sizes for quick part identification.
$
99.25
Qty:
Part #:509621
- 125' Steel Fish Tape
Oil-tempered spring steel for excellent fishing performance
Dirt-free tape finish keeps hands cleaner during use
Advanced comfort handle grip reduces fatigue
Superior rapid tape pay-out and rewind
Smaller Fish Eye with offset bend for improved fishing ability
Improved low profile tip for easy fishing through all sizes of conduit
Viewing Port gives visibility to remaining tape and ability to remove jobsite debris quickly
Rugged case design improves drop impact capability
Flared case with Grip Ridges for no slip handling
Available in 50 FT (15
2 m), 65 FT (19
8 m), 125 FT (38
1 m) and 240 FT (73
2 m) lengths
1/8 IN, 1/4 IN and flat steel profiles to accommodate different fishing situations
$
83.50
Qty:
Part #:801143
- DMM, 600V AC/DC, 10A, CAP, TEMP (DM-45)
Large, easy-to-read displays
Lifetime warranty
Feature packed
Replaceable fuses for easy field repair
Frequency, capacitance, duty cycle, temperature, battery test and analog bar graph are just some of the features available on these meters
$
72.85
Qty:
Part #:801444
- 4,000-Count Digital Multimeter, 1000V, 10A (DM-65)
Large, easy-to-read displays
Lifetime warranty
Feature packed
Replaceable fuses for easy field repair
Frequency, capacitance, duty cycle, temperature, battery test and analog bar graph are just some of the features available on these meters
$
124.35
Qty:
Part #:805304
- 3/4" Conduit Size Slug-Buster® Knockout Punch
Unique punch profile splits slugs allowing for easy slug removal
Knurled edge for better grip
Laser markings for quick part identification
Made in USA
Replaces 721-3/4P
$
36.30
Qty:
Part #:805771
- 1" Conduit Size Slug-Buster® Knockout Punch
Unique punch profile splits slugs allowing for easy slug removal
Knurled edge for better grip
Laser markings for quick part identification
Made in USA
Replaces 721-1P
$
43.90
Qty:
Part #:805317
- 50118684,TEST (TSG-3)
39 IN (1 m) long flexible silicon insulated wire
Right-angle meter plugs
Comfort-grip over molded probes
Gold plated tips for low contact resistance
Set of 2 leads, one black, one red
Measurement Category IV, 1000V per UL-61010
Maximum current 10 amps
Lifetime Limited Warranty
$
38.60
Qty:
Part #:505326
- Pilot Drill Hole Saw (6 Pack)
Qty:
closeout
$31.18 MSRP
$
27.50
Part #:521040
- CLOSEOUTS Only 3 Left!
- TWISTED PAIR STRIPPER
No tool is better for trimming the jacket from twisted pair cable without damaging the individual conductors
Blade depth adjustment ensures precise cutting depth
Blade penetration controlled by tension loop
Strip length gauge
Made in the USA
Qty:
Displaying: 1 - 24 of 32 Matching Items