Heat Shrink
Electrical Equipment
View:
Active Filters :
- Main Category: Electrical Equipment
- Electrical Supplies: Heat Shrink Pulling Lube Push-In Connectors
Part #:307274
- Yellow 77® Plus, 1-Quart Squeeze Bottle
IDEAL Yellow 77® Plus Wire pulling lubricant is a wax-based formula offering superior lubricity due to the Rapid Glide&trade polytetrafluoroethylene additive &mdash great for tough pulls. It is safe to use with all cable types. It won't break down/separate after repeated exposure to freezing temperatures and dries to a thin, non-conductive film that won't clog conduit. Yellow 77® Plus has a creamy texture and clings to cable throughout long pulls. Apply conveniently and uniformly by hand or brush. It is a homogeneous blend that requires no mixing and forms surface coat to control evaporation, so it won't dry out. It is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. Lubricant remains stable in high temperature from 32°F to 190°F (0°C to 88°C). It comes in 1 qt squeeze bottle, 1-gallon bucket, and 5-gallon bucket. Lubricant is UL listed.
Rapid Glide&trade polytetrafluoroethylene additive provides greater lubricity than other wax-based lubricants &mdash great for tough pulls
Safe to use with all cable types
Clings to cable throughout long runs, even where moisture is present
Remains temperature stable from 32°F to 190°F (0°C to 88°C)
Environmentally safe &ndash non-toxic, non-flammable and non-corrosive
Qty:
closeout
$
7.25
Qty:
Part #:307340
- Yellow 77®, 5-Gallon Bucket
IDEAL Yellow 77® Wire pulling lubricant is a wax-based formula, and is the perfect general purpose lube. It is safe to use with most cable types except low-density polyethylene and semi-conducting jackets. It won't break down/separate after repeated exposure to freezing temperatures and dries to a thin, non-conductive film that won't clog conduit. Yellow 77® has a creamy texture and clings to cable throughout long pulls. Apply conveniently and uniformly by hand or brush. It is a homogeneous blend that requires no mixing and forms surface coat to control evaporation, so it won't dry out. It is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. Lubricant remains stable in high temperature of 32°F to 130°F (0°C to 54°C). It comes in 1 qt squeeze bottle, 1-gallon bucket, 5-gallon bucket, and 55 gallon drum. Lubricant is UL listed.
Safe to use with most cable types except low-density polyethylene and semi-conducting jackets
Clings to cable throughout long runs, even where moisture is present
Remains temperature stable from 32°F to 130°F (0°C to 54°C)
Dries slowly to a thin, non-conductive film that won&rsquot harden in conduit
Environmentally safe &ndash non-toxic, non-flammable and non-corrosive
Qty:
Part #:539-46-601
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 1/16" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:539-46-602
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 3/32" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:539-46-604
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 3/16" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:310794
- Thermo-Shrink® Heavy-Wall Heat Shrink, 9" Length, 6-1 AWG
TS-46 irradiated cross-linked polyolefin with 31 standard shrink ratio
Adhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applications
Maximum flame retardancy
Meets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirements
Rated for 600V, 90°C continuous use
Qty:
Part #:808975
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 1/8" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Part #:306687
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 5/16" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:803691
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 1/2" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:539-31-391
- Yellow 77® Plus, 1-Gallon Bucket
IDEAL Yellow 77® Plus Wire pulling lubricant is a wax-based formula offering superior lubricity due to the Rapid Glide&trade polytetrafluoroethylene additive &mdash great for tough pulls. It is safe to use with all cable types. It won't break down/separate after repeated exposure to freezing temperatures and dries to a thin, non-conductive film that won't clog conduit. Yellow 77® Plus has a creamy texture and clings to cable throughout long pulls. Apply conveniently and uniformly by hand or brush. It is a homogeneous blend that requires no mixing and forms surface coat to control evaporation, so it won't dry out. It is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. Lubricant remains stable in high temperature from 32°F to 190°F (0°C to 88°C). It comes in 1 qt squeeze bottle, 1-gallon bucket, and 5-gallon bucket. Lubricant is UL listed.
Rapid Glide&trade polytetrafluoroethylene additive provides greater lubricity than other wax-based lubricants &mdash great for tough pulls
Safe to use with all cable types
Clings to cable throughout long runs, even where moisture is present
Remains temperature stable from 32°F to 190°F (0°C to 88°C)
Environmentally safe &ndash non-toxic, non-flammable and non-corrosive
Qty:
Part #:310947
- Thermo-Shrink® Heavy-Wall Heat Shrink, 9" Length, 4/0-400 MCM
TS-46 irradiated cross-linked polyolefin with 31 standard shrink ratio
Adhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applications
Maximum flame retardancy
Meets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirements
Rated for 600V, 90°C continuous use
Qty:
Part #:311426
- Thermo-Shrink® Heavy-Wall Heat Shrink, 9" Length, 500-1,000 MCM
TS-46 irradiated cross-linked polyolefin with 31 standard shrink ratio
Adhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applications
Maximum flame retardancy
Meets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirements
Rated for 600V, 90°C continuous use
Qty:
Part #:806554
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 1/4" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:539-46-609
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 3/4" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:539-30-372
- PowerPlug® Luminaire Disconnect, Model 102, 2-Wire, Card of 25
Advanced Push-In Technology
Fast & Efficient Ballast Connections Improved Labor Savings
$
195.28
Qty:
Part #:310950
- In-Sure® Push-In Wire Connector, Model 33 3-Port Org, Box of 100
Strip, push, connect &ndash the fastest way to make a connection.
The In-Sure® Push-In Wire Connector is perfect for residential, light commercial, lighting retrofit, and pre-fab wiring systems, or any other branch circuit wiring application where a traditional twist-on wire connector would be used. Simply push the wire in &ndash the low insertion force makes it easy.
The color-coded shell allows for quick identification of port configuration while the clear polycarbonate housing allows for visual verification of every connection. The ergonomic design is easier to grip which means more comfortable push-in connections. The compact size makes for easy installations in even the tightest spots or shallow boxes, and the tough, flame-retardant shell stands up to the harshest environments.
UL Listed, CSA Certified, and rated to 600V &ndash the In-Sure® saves time and improves productivity while perfecting connections.
COPPER TO COPPER ONLY. Do not use on aluminum.
Ergonomic design for easy grip and comfortable installation
Low insertion force for fast and easy connections
Compact size makes installation easy
Clear shell gives visual verification of connection
Tough, UL 94V-2 flame-retardant shell rated at 105°C (221°F)
Approved for bonding and grounding applications
Qty:
Displaying: 1 - 17 of 17 Matching Items