Black & Decker (Us) Inc
Fasteners and Hardware
View:
Active Filters :
- Main Category: Fasteners and Hardware
- Brand: Black & Decker (Us) Inc Columbus Mckinnon Hilti Porter Cable
Part #:521094
- Country of Origin TW:
Qty:
Part #:513171
- Country of Origin CN:
Qty:
Part #:500192
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
7.49
Qty:
Part #:508616
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
2.53
Qty:
Part #:805310
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
3.36
Qty:
Part #:508621
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
4.72
Qty:
Part #:519003
- Country of Origin CN:
Qty:
Part #:500704
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
7.05
Qty:
Part #:505194
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
1.39
Qty:
Part #:508560
-
X-U P8 Steel/concrete nails Universal nail X-U 37 P8 #2141088
Ultimate-performance single nail for fastening to concrete and steel using powder-actuated tools
Base materialsConcrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)
Minimum thickness of base material (concrete)80 mm
Minimum thickness of base material (steel)1/4 in
Corrosion protectionGalvanized zinc coatedEnvironmental ConditionsDry indoorMaterialCarbon steelFastener shank diameter0.16 inWasher size5/16 inPoint typeBallistic point, knurledApprovalsABS, COLA, DIBt, IBMB, ICC-ES, LRFor use with (tools)DX 2, DX 35, DX 351, DX 351 M/E, DX 36, DX 460 F8, DX 462 F8, DX 5 F8, DX E72Product ClassUltimate
Part #:508562
-
X-U P8 Steel/concrete nails Universal nail X-U 47 P8 #2141180
Base materialsConcrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)Minimum thickness of base material (concrete)80 mmMinimum thickness of base material (steel)1/4 inCorrosion protectionGalvanized zinc coatedEnvironmental ConditionsDry indoorMaterialCarbon steelFastener shank diameter0.16 inWasher size5/16 inPoint typeBallistic point, knurledApprovalsABS, COLA, DIBt, IBMB, ICC-ES, LRFor use with (tools)DX 2, DX 36, DX 460 F8, DX 5 F8, DX E72Product ClassUltimate
Part #:508567
-
X-U P8 Steel/concrete nails Universal nail X-U 19 P8 #2141084Base materialsSteelMinimum thickness of base material (concrete)80 mmMinimum thickness of base material (steel)1/4 inCorrosion protectionGalvanized zinc coated <20 µmEnvironmental ConditionsDry indoorMaterialCarbon steelFastener shank diameter0.16 inWasher size5/16 inPoint typeBallistic point, knurledApprovalsABS, COLA, DIBt, IBMB, ICC-ES, LRFor use with (tools)DX 2, DX 35, DX 351, DX 351 M/E, DX 36, DX 460 F8, DX 462 F8, DX 5 F8, DX E72Product ClassUltimate
Part #:508626
-
HDI+ / HDI Flush anchor Drop-in anchor HDI 5/8" #336428Approvals / Test reportsFM (Factory Mutual), UL (Underwriter Laboratories)Material, corrosionCarbon steel, zinc-platedBase materialsConcrete (lightweight), Concrete (lightweight over metal deck), Concrete (uncracked)PROFIS SoftwareNoDrill bit diameter27/32 inProduct ClassPremium
Part #:508625
-
HDI+ / HDI Flush anchor Drop-in anchor HDI+ 1/2" #2080046Approvals / Test reportsFM (Factory Mutual), UL (Underwriter Laboratories)Material, corrosionCarbon steel, zinc-platedBase materialsConcrete (lightweight), Concrete (lightweight over metal deck), Concrete (uncracked)PROFIS SoftwareNoDrill bit diameter5/8 inProduct ClassPremium
$
1.90
Qty:
Part #:508573
-
X-W10 P10 Threaded studs Threaded stud W10-30-27 P10 #26472Base materialsConcrete (soft), Concrete (tough)Corrosion protectionGalvanized zinc coatedEnvironmental ConditionsDry indoorMaterialCarbon steelPoint typeBallistic pointFor use with (tools)DX 600NProduct ClassPremium
Qty:
closeout
$0.90 MSRP
$
0.72
Part #:504416
- CLOSEOUTS Only 91 Left!
- Country of Origin CN:
Qty:
closeout
$3.42 MSRP
$
2.73
Part #:519075
- CLOSEOUTS Only 25 Left!
- Country of Origin CN:
Qty:
Part #:508555
-
X-U P8 Steel/concrete nails Universal nail X-U 22 P8 #2141085
Ultimate-performance single nail for fastening to concrete and steel using powder-actuated tools
Base materialsConcrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)
Minimum thickness of base material (concrete)80 mm
Minimum thickness of base material (steel)1/4 in
Base materialsConcrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)Minimum thickness of base material (concrete)80 mmMinimum thickness of base material (steel)1/4 inCorrosion protectionGalvanized zinc coatedEnvironmental ConditionsDry indoorMaterialCarbon steelFastener shank diameter0.16 inWasher size5/16 inPoint typeBallistic point, knurledApprovalsABS, COLA, DIBt, IBMB, ICC-ES, LRFor use with (tools)DX 2, DX 35, DX 351, DX 351 M/E, DX 36, DX 460 F8, DX 462 F8, DX 5 F8, DX E72Product ClassUltimate
Part #:508556
-
X-U P8 Steel/concrete nails Universal nail X-U 27 P8 #2141086
Ultimate-performance single nail for fastening to concrete and steel using powder-actuated tools
Base materialsConcrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)
Minimum thickness of base material (concrete)80 mm
Minimum thickness of base material (steel)1/4 in
Base materialsConcrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)Minimum thickness of base material (concrete)80 mmMinimum thickness of base material (steel)1/4 inCorrosion protectionGalvanized zinc coatedEnvironmental ConditionsDry indoorMaterialCarbon steelFastener shank diameter0.16 inWasher size5/16 inPoint typeBallistic point, knurledApprovalsABS, COLA, DIBt, IBMB, ICC-ES, LRFor use with (tools)DX 2, DX 35, DX 351, DX 351 M/E, DX 36, DX 460 F8, DX 462 F8, DX 5 F8, DX E72Product ClassUltimate
Part #:508557
-
X-U P8 Steel/concrete nails Universal nail X-U 32 P8 #2141087
Ultimate-performance single nail for fastening to concrete and steel using powder-actuated tools
Base materialsConcrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)
Minimum thickness of base material (concrete)80 mm
Minimum thickness of base material (steel)1/4 in
Base materialsConcrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)Minimum thickness of base material (concrete)80 mmMinimum thickness of base material (steel)1/4 inCorrosion protectionGalvanized zinc coated <20 µmEnvironmental ConditionsDry indoorMaterialCarbon steelFastener shank diameter0.16 inWasher size5/16 inPoint typeBallistic point, knurledApprovalsABS, COLA, DIBt, IBMB, ICC-ES, LRFor use with (tools)DX 2, DX 35, DX 351, DX 351 M/E, DX 36, DX 460 F8, DX 462 F8, DX 5 F8, DX E72Product ClassUltimate
Part #:508561
-
X-U P8 Steel/concrete nails Universal nail X-U 42 P8 #2141089
Ultimate-performance single nail for fastening to concrete and steel using powder-actuated tools
Base materialsConcrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)
Minimum thickness of base material (concrete)80 mm
Minimum thickness of base material (steel)1/4 in
Corrosion protectionGalvanized zinc coatedEnvironmental ConditionsDry indoorMaterialCarbon steelFastener shank diameter0.16 inWasher size5/16 inPoint typeBallistic point, knurledApprovalsABS, COLA, DIBt, IBMB, ICC-ES, LRFor use with (tools)DX 2, DX 36, DX 460 F8, DX 5 F8, DX E72Product ClassUltimate
Part #:508564
-
X-U P8 Steel/concrete nails Universal nail X-U 52 P8 #2141181
Base materialsConcrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)Minimum thickness of base material (concrete)80 mmMinimum thickness of base material (steel)1/4 inCorrosion protectionGalvanized zinc coatedEnvironmental ConditionsDry indoorMaterialCarbon steelFastener shank diameter0.16 inWasher size5/16 inPoint typeBallistic point, knurledApprovalsABS, COLA, DIBt, IBMB, ICC-ES, LRFor use with (tools)DX 2, DX 36, DX 460 F8, DX 5 F8, DX E72Product ClassUltimate
Part #:508565
-
X-U P8 Steel/concrete nails Universal nail X-U 57 P8 #2141182Base materialsConcrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)Minimum thickness of base material (concrete)80 mmMinimum thickness of base material (steel)1/4 inCorrosion protectionGalvanized zinc coatedEnvironmental ConditionsDry indoorMaterialCarbon steelFastener shank diameter0.16 inWasher size5/16 inPoint typeBallistic point, knurledApprovalsABS, COLA, DIBt, IBMB, ICC-ES, LRFor use with (tools)DX 2, DX 36, DX 460 F8, DX 5 F8, DX E72Product ClassUltimate
Displaying: 1 - 24 of 86 Matching Items