DeWalt 5/8in-11 x 3-1/2in Power-Stud Wedge Expansion Anchor Zinc Plated 7430SD1-PWR

Power-Stud^®+ SD1 Wedge Expansion Anchor

The Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, and grouted concrete masonry. The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.

FEATURES

• Consistent performance in high and low strength concrete
• Nominal drill bit size is the same as the anchor diameter
• Anchor can be installed through standard fixture holes
• Length ID code and identifying marking stamped on head of each anchor
• Anchor design allows for follow-up expansion after setting under tensile loading

APPLICATIONS

• Structural connections, i.e., beam and column anchorage
• Safety-related attachments
• Interior applications / low level corrosion environment
• Tension zone applications, i.e., cable trays and strut, pipe supports, fire sprinklers

APPROVALS

• International Code Council, Evaluation Service (ICC-ES), ESR-2818 for cracked and uncracked concrete
• International Code Council, Evaluation Service (ICC-ES), ESR-2966 for masonry
• Code compliant with the 2015 IBC, 2015 IRC, 2012 IBC, 2012 IRC, 2009 IBC, and 2009 IRC
• Tested in accordance with ACI 355.2/ASTM E 488 and ICC-ES AC193 for use in structural concrete under the design provisions of ACI 318-14 Chapter 17 or ACI 318-11/08 Appendix D
• Evaluated and qualifi ed by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading (Category 1 anchors)
• Tested in accordance with ICC-ES AC01 for use in Masonry
• Underwriters Laboratories (UL Listed) - File No. EX1289, see listing for sizes