Powder Actuated
Fasteners and Hardware


Displaying: 1 - 22 of 22 Matching Items
22 Items
View:
Active Filters :
Part #:508560

X-U P8 Steel/concrete nails Universal nail X-U 37 P8 #2141088 Ultimate-performance single nail for fastening to concrete and steel using powder-actuated tools Base materialsConcrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick) Minimum thickness of base material (concrete)80 mm Minimum thickness of base material (steel)1/4 in Corrosion protectionGalvanized zinc coatedEnvironmental ConditionsDry indoorMaterialCarbon steelFastener shank diameter0.16 inWasher size5/16 inPoint typeBallistic point, knurledApprovalsABS, COLA, DIBt, IBMB, ICC-ES, LRFor use with (tools)DX 2, DX 35, DX 351, DX 351 M/E, DX 36, DX 460 F8, DX 462 F8, DX 5 F8, DX E72Product ClassUltimate
$ 82.47
BX
Part #:508562

X-U P8 Steel/concrete nails Universal nail X-U 47 P8 #2141180 Base materialsConcrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)Minimum thickness of base material (concrete)80 mmMinimum thickness of base material (steel)1/4 inCorrosion protectionGalvanized zinc coatedEnvironmental ConditionsDry indoorMaterialCarbon steelFastener shank diameter0.16 inWasher size5/16 inPoint typeBallistic point, knurledApprovalsABS, COLA, DIBt, IBMB, ICC-ES, LRFor use with (tools)DX 2, DX 36, DX 460 F8, DX 5 F8, DX E72Product ClassUltimate
$ 95.45
BX
Part #:508567

X-U P8 Steel/concrete nails Universal nail X-U 19 P8 #2141084Base materialsSteelMinimum thickness of base material (concrete)80 mmMinimum thickness of base material (steel)1/4 inCorrosion protectionGalvanized zinc coated &lt20 &micromEnvironmental ConditionsDry indoorMaterialCarbon steelFastener shank diameter0.16 inWasher size5/16 inPoint typeBallistic point, knurledApprovalsABS, COLA, DIBt, IBMB, ICC-ES, LRFor use with (tools)DX 2, DX 35, DX 351, DX 351 M/E, DX 36, DX 460 F8, DX 462 F8, DX 5 F8, DX E72Product ClassUltimate
$ 69.53
BX
Part #:508555

X-U P8 Steel/concrete nails Universal nail X-U 22 P8 #2141085 Ultimate-performance single nail for fastening to concrete and steel using powder-actuated tools Base materialsConcrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick) Minimum thickness of base material (concrete)80 mm Minimum thickness of base material (steel)1/4 in Base materialsConcrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)Minimum thickness of base material (concrete)80 mmMinimum thickness of base material (steel)1/4 inCorrosion protectionGalvanized zinc coatedEnvironmental ConditionsDry indoorMaterialCarbon steelFastener shank diameter0.16 inWasher size5/16 inPoint typeBallistic point, knurledApprovalsABS, COLA, DIBt, IBMB, ICC-ES, LRFor use with (tools)DX 2, DX 35, DX 351, DX 351 M/E, DX 36, DX 460 F8, DX 462 F8, DX 5 F8, DX E72Product ClassUltimate
$ 71.61
BX
Part #:508556

X-U P8 Steel/concrete nails Universal nail X-U 27 P8 #2141086 Ultimate-performance single nail for fastening to concrete and steel using powder-actuated tools Base materialsConcrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick) Minimum thickness of base material (concrete)80 mm Minimum thickness of base material (steel)1/4 in Base materialsConcrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)Minimum thickness of base material (concrete)80 mmMinimum thickness of base material (steel)1/4 inCorrosion protectionGalvanized zinc coatedEnvironmental ConditionsDry indoorMaterialCarbon steelFastener shank diameter0.16 inWasher size5/16 inPoint typeBallistic point, knurledApprovalsABS, COLA, DIBt, IBMB, ICC-ES, LRFor use with (tools)DX 2, DX 35, DX 351, DX 351 M/E, DX 36, DX 460 F8, DX 462 F8, DX 5 F8, DX E72Product ClassUltimate
$ 73.84
BX
Part #:508557

X-U P8 Steel/concrete nails Universal nail X-U 32 P8 #2141087 Ultimate-performance single nail for fastening to concrete and steel using powder-actuated tools Base materialsConcrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick) Minimum thickness of base material (concrete)80 mm Minimum thickness of base material (steel)1/4 in Base materialsConcrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)Minimum thickness of base material (concrete)80 mmMinimum thickness of base material (steel)1/4 inCorrosion protectionGalvanized zinc coated &lt20 &micromEnvironmental ConditionsDry indoorMaterialCarbon steelFastener shank diameter0.16 inWasher size5/16 inPoint typeBallistic point, knurledApprovalsABS, COLA, DIBt, IBMB, ICC-ES, LRFor use with (tools)DX 2, DX 35, DX 351, DX 351 M/E, DX 36, DX 460 F8, DX 462 F8, DX 5 F8, DX E72Product ClassUltimate
$ 76.05
BX
Part #:508561

X-U P8 Steel/concrete nails Universal nail X-U 42 P8 #2141089 Ultimate-performance single nail for fastening to concrete and steel using powder-actuated tools Base materialsConcrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick) Minimum thickness of base material (concrete)80 mm Minimum thickness of base material (steel)1/4 in Corrosion protectionGalvanized zinc coatedEnvironmental ConditionsDry indoorMaterialCarbon steelFastener shank diameter0.16 inWasher size5/16 inPoint typeBallistic point, knurledApprovalsABS, COLA, DIBt, IBMB, ICC-ES, LRFor use with (tools)DX 2, DX 36, DX 460 F8, DX 5 F8, DX E72Product ClassUltimate
$ 90.54
BX
Part #:508564

X-U P8 Steel/concrete nails Universal nail X-U 52 P8 #2141181 Base materialsConcrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)Minimum thickness of base material (concrete)80 mmMinimum thickness of base material (steel)1/4 inCorrosion protectionGalvanized zinc coatedEnvironmental ConditionsDry indoorMaterialCarbon steelFastener shank diameter0.16 inWasher size5/16 inPoint typeBallistic point, knurledApprovalsABS, COLA, DIBt, IBMB, ICC-ES, LRFor use with (tools)DX 2, DX 36, DX 460 F8, DX 5 F8, DX E72Product ClassUltimate
$ 105.12
BX
Part #:508565

X-U P8 Steel/concrete nails Universal nail X-U 57 P8 #2141182Base materialsConcrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)Minimum thickness of base material (concrete)80 mmMinimum thickness of base material (steel)1/4 inCorrosion protectionGalvanized zinc coatedEnvironmental ConditionsDry indoorMaterialCarbon steelFastener shank diameter0.16 inWasher size5/16 inPoint typeBallistic point, knurledApprovalsABS, COLA, DIBt, IBMB, ICC-ES, LRFor use with (tools)DX 2, DX 36, DX 460 F8, DX 5 F8, DX E72Product ClassUltimate
$ 115.96
BX
Part #:508566

X-U P8 Steel/concrete nails Universal nail X-U 62 P8 #2141183 Base materialsConcrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)Minimum thickness of base material (concrete)80 mmMinimum thickness of base material (steel)1/4 inCorrosion protectionGalvanized zinc coatedEnvironmental ConditionsDry indoorMaterialCarbon steelFastener shank diameter0.16 inWasher size5/16 inPoint typeBallistic point, knurledApprovalsABS, COLA, DIBt, IBMB, ICC-ES, LRFor use with (tools)DX 2, DX 36, DX 460 F8, DX 5 F8, DX E72Product ClassUltimate
$ 118.35
BX
Part #:508573

X-W10 P10 Threaded studs Threaded stud W10-30-27 P10 #26472Base materialsConcrete (soft), Concrete (tough)Corrosion protectionGalvanized zinc coatedEnvironmental ConditionsDry indoorMaterialCarbon steelPoint typeBallistic pointFor use with (tools)DX 600NProduct ClassPremium
$ 159.82
BX
Part #:504507

5.5/16 Powder cartridges (.22 caliber) Cartridge 5.6/16 .22 cal brown #50396 Propellant cartridges for use with the DX E72 powder actuated tool For use with (tools)DX 351 BT Cartridge type5.5/16 NC ApprovalsCE, CIP, PTB For use with (tools)DX 351 BTCartridge type5.5/16 NCApprovalsCE, CIP, PTBCartridge colorBrownCartridge strip capacity1Energy level (ANSI)2Clean-TecNoEnergy level (DIN)2Storage temperature - min.41 &degFStorage temperature - max.77 &degFProduct ClassUltimate
$ 17.26 BOX
BX
Part #:504513

5.5/16 Powder cartridges (.22 caliber) Cartridge 5.6/16 .22 cal yellow #50398 Propellant cartridges for use with the DX E72 powder actuated tool For use with (tools)DX E37, DX E72 Cartridge type5.5/16 NC ApprovalsCE, CIP, PTB For use with (tools)DX E37, DX E72Cartridge type5.5/16 NCApprovalsCE, CIP, PTBCartridge colorYellowCartridge strip capacity1Energy level (ANSI)4Clean-TecNoEnergy level (DIN)4Storage temperature - min.41 &degFStorage temperature - max.77 &degFProduct ClassUltimate
$ 17.26 BOX
BX
Part #:508532

6.8/11 M10 Powder cartridges Cartridge 6.8/11 M .27 cal green #50351 Collated cartridges for use with powder actuated nailers For use with (tools)DX 2, DX 351, DX 351 CT, DX 351 M/E, DX 351 MX 27, DX 351 MX 32, DX 36, DX 450, DX 460 F10, DX 460 F8, DX 460 F8S12, DX 460 FP8, DX 460 GR, DX 460 IE, DX 460 IE-XL, DX 460 MX, DX 460 MX, DX 460 SM, DX 460 SR, DX 462 CM, DX 462 CM, DX 462 F8, DX 462 F8S12, DX 5 F10, DX 5 F8, DX 5 F8S12, DX 5 GR, DX 5 IE, DX 5 IE-XL, DX 5 MX, DX 5 MX, DX 5 SM, DX A40, DX A41 Cartridge type.27 caliber short ApprovalsCE, CIP, PTB ApprovalsCE, CIP, PTBCartridge colorGreenCartridge strip capacity10Energy level (ANSI)3Clean-TecNoEnergy level (DIN)3Storage temperature - min.41 &degFStorage temperature - max.77 &degFProduct ClassUltimate
$ 32.32
BX
Part #:508537

6.8/11 M10 Powder cartridgesCartridge 6.8/11 M .27 cal yellow #50352 Collated cartridges for use with powder actuated nailers For use with (tools)DX 2, DX 351, DX 351 CT, DX 351 M/E, DX 351 MX 27, DX 351 MX 32, DX 36, DX 450, DX 460 F10, DX 460 F8, DX 460 F8S12, DX 460 FP8, DX 460 GR, DX 460 IE, DX 460 IE-XL, DX 460 MX, DX 460 MX, DX 460 SM, DX 460 SR, DX 462 CM, DX 462 CM, DX 462 F8, DX 462 F8S12, DX 5 F10, DX 5 F8, DX 5 F8S12, DX 5 GR, DX 5 IE, DX 5 IE-XL, DX 5 MX, DX 5 MX, DX 5 SM, DX A40, DX A41 Cartridge type.27 caliber short ApprovalsCE, CIP, PTB Cartridge strip capacity10Energy level (ANSI)4Clean-TecNoEnergy level (DIN)4Storage temperature - min.41 &degFStorage temperature - max.77 &degF
$ 31.68
BX
Part #:508546

6.8/11 M10 Powder cartridges Cartridge 6.8/11 M .27 cal red #50353 Collated cartridges for use with powder actuated nailers For use with (tools)DX 2, DX 351, DX 351 CT, DX 351 M/E, DX 351 MX 27, DX 351 MX 32, DX 36, DX 450, DX 460 F10, DX 460 F8, DX 460 F8S12, DX 460 FP8, DX 460 GR, DX 460 IE, DX 460 IE-XL, DX 460 MX, DX 460 MX, DX 460 SM, DX 460 SR, DX 462 CM, DX 462 CM, DX 462 F8, DX 462 F8S12, DX 5 F10, DX 5 F8, DX 5 F8S12, DX 5 GR, DX 5 IE, DX 5 IE-XL, DX 5 MX, DX 5 MX, DX 5 SM, DX A40, DX A41 Cartridge type.27 caliber short ApprovalsCE, CIP, PTB Cartridge strip capacity10Energy level (ANSI)5Clean-TecNoEnergy level (DIN)6Storage temperature - min.41 &degFStorage temperature - max.77 &degFProduct ClassUltimate
$ 31.68
BX
Part #:508547

6.8/11 M10 Clean-Tec powder cartridges DX cartridge 6.8/11 M10 STD black #416475 Collated Clean-Tec cartridges for use with powder actuated nailers For use with (tools)DX 450, DX 460 F10, DX 460 F8, DX 460 F8S12, DX 460 FP8, DX 460 GR, DX 460 IE, DX 460 IE-XL, DX 460 MX, DX 460 MX, DX 460 SM, DX 460 SR, DX 462 CM, DX 462 CM, DX 5 F10, DX 5 F10 PTR, DX 5 F8, DX 5 F8S12, DX 5 GR, DX 5 IE, DX 5 IE-XL, DX 5 MX, DX 5 MX, DX 5 SM Cartridge type6.8/11 M10 Cartridge colorBlack Cartridge strip capacity10Energy level (ANSI)6Clean-TecYesEnergy level (DIN)7Storage temperature - min.41 &degFStorage temperature - max.77 &degFProduct ClassUltimate
$ 38.08
BX
closeout
Part #:510275

CLOSEOUTS Only 1 Left!
6.3/10 M10 Powder cartridges (.25 caliber) Cartridge 6.3/10 M .25 cal green #50106For use with (tools)DX 35Cartridge type.25 caliber shortApprovalsCIP, PTBCartridge colorGreenCartridge strip capacity10Energy level (ANSI)3Clean-TecNoEnergy level (DIN)3Storage temperature - min.41 &degFStorage temperature - max.77 &degFProduct ClassUltimate
$ 27.72 BOX
Part #:510300

6.3/10 M10 Powder cartridges (.25 caliber) Cartridge 6.3/10 M .25 cal yellow #50116For use with (tools)DX 35Cartridge type.25 caliber shortApprovalsCIP, PTBCartridge colorYellowCartridge strip capacity10Energy level (ANSI)4Clean-TecNoEnergy level (DIN)4Storage temperature - min.41 &degFStorage temperature - max.77 &degFProduct ClassUltimate
$ 267.19 BOX
closeout
Part #:504505

CLOSEOUTS Only 2 Left!
Applications; For use with the DX E72 single-shot tool for fastenings to steel and concrete. For driving pins and studs into concrete and steel.:
$ 11.33 BX
BX
closeout
Part #:507053

CLOSEOUTS Only 2 Left!
$ 109.15
Part #:508558

When 34398 sells, replaced by #237372 X-U 32 P8 S15 X-U P8 S Steel/concrete nails with washer Premium fastener w/washer X-U 32 P8 S15 #237372 Ultimate-performance single nail with steel washer for fastening to concrete and steel using powder-actuated tools Base materialsSteel, Concrete Minimum thickness of base material (concrete)80 mm Corrosion protectionGalvanized zinc coated Base materialsSteel, ConcreteMinimum thickness of base material (concrete)80 mmCorrosion protectionGalvanized zinc coated
$ 72.18 BOX
 
Displaying: 1 - 22 of 22 Matching Items