Federal Process
Ideal
View:
Active Filters :
- Brand: Ideal Federal Process
- Color: Black
Part #:539-B-11-50-0-C
- Cable Tie, 11", 50 lb., UV Black, 100/pack
General purpose cable tie for building and cable management
Agency approved UL Listed, CSA Listed and Plenum Rated
Qty:
Part #:310794
- Thermo-Shrink® Heavy-Wall Heat Shrink, 9" Length, 6-1 AWG
TS-46 irradiated cross-linked polyolefin with 31 standard shrink ratio
Adhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applications
Maximum flame retardancy
Meets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirements
Rated for 600V, 90°C continuous use
Qty:
Part #:539-30-3628
- High-Temp Wire-Nut® Wire Connector, Model 72B® Black, Box of 100
The connector that started it all, an American Classic.
The IDEAL Wire-Nut® Wire Connector set new standards for innovation, quality and convenience when it was first introduced in 1928. As the first screw-on wire connector in America, it literally set the industry standard for years to come.
With a fixed, square-wire spring and a positive grip shell, the Wire-Nut® is perfect to twist-on with fingers for a secure connection that will last. The refined wire range makes it the best choice for fine stranded wire applications. The Wire-Nut® also features a tough, flame-retardant thermoplastic shell that withstands environmental extremes and is reusable for easy circuit changes and addition.
With five color-coded models available, Wire-Nut® Wire Connectors will handle any job from as small as #22 gauge wire up to #6 gauge wire.
Additionally, Models 71B®, 72B®, and 73B®, in both color or black high-temp, are the only twist-on wire connectors rated for use in Air Handling Spaces. These connectors can be used on Class 2 or low-voltage connections inside plenums, ducts, and other environmental air handling spaces without the need for a box.
The black high-temperature models are designed to withstand the extreme heat build-up found in high-wattage light fixtures and signs.
Designed to withstand the extreme heat build-up found in high-wattage light fixtures and signs
Fixed, square-wire spring for a grip that will last
Refined range to handle all common applications
Positive grip shell that is perfect to twist-on with fingers
Excellent for fine stranded wire applications
Models 71B®, 72B®, and 73B® rated for use in Air Handling Spaces
Approved for bonding and grounding applications
Qty:
Part #:808975
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 1/8" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Part #:306687
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 5/16" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:803691
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 1/2" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:310947
- Thermo-Shrink® Heavy-Wall Heat Shrink, 9" Length, 4/0-400 MCM
TS-46 irradiated cross-linked polyolefin with 31 standard shrink ratio
Adhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applications
Maximum flame retardancy
Meets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirements
Rated for 600V, 90°C continuous use
Qty:
Part #:311426
- Thermo-Shrink® Heavy-Wall Heat Shrink, 9" Length, 500-1,000 MCM
TS-46 irradiated cross-linked polyolefin with 31 standard shrink ratio
Adhesive liner provides complete insulation and protection to electrical splices in above-grade, underground or underwater applications
Maximum flame retardancy
Meets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE 383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and NEMA insulation thickness requirements
Rated for 600V, 90°C continuous use
Qty:
Part #:806554
- Thermo-Shrink® Thin-Wall Heat Shrink Disk, 4' Length, 1/4" ID
Polyolefin material electrically insulates and protects in-line components, disconnect terminals and splices with its high strength and excellent resilience
Use to bundle wires for very flexible light-duty harnesses
Highly flame-retardant and flexible resistant to common fluids and solvents
Meets UL 486D 125°C VW-1 600V Material No PBB&rsquos, PBBE&rsquos, conforms to ROHS
21 shrink ratio Minimum shrink temperature 70°C Operating temperature -55°C to +125°C
RoHS compliant
UV resistant
Qty:
Part #:539-IT3I-C0
- Cable Tie, 11", 40 lb., UV Black, 100/Bag
Quality Construction
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
One-piece design for added strength
Tapered thin tip reduces initial friction
Tapered tall grip assures positive threading
Qty:
Part #:539-IT3S-C0
- Cable Tie, 11", 50 lb., UV Black, 100/Bag
Agency Compliant
UL Approved, CSA Approved, Mil-Spec Approved, RoHs Compliant Products
Quality Construction
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
UL Listed, CSA Listed, Mil-Spec Approved, RoHs Compliant
Quality construction
Low insertion force
No burrs or sharp edges
Stepped tail gripper
Angled tail
Qty:
Part #:306674
- Cable Tie, 14", 50 lb., UV Black, 100/Bag
Agency Compliant
UL Approved, CSA Approved, Mil-Spec Approved, RoHs Compliant Products
Quality Construction
One-piece design for added strength
Superior locking mechanism
Exceeds industry tensile strength ratings
Low Insertion Force
Tapered thin tip reduces initial friction
Lowest insertion force with high tensile strength
Reduces installation fatigue
No Burrs or Sharp Edges
Smooth corners provide added safety
Rounded edges eliminate insulation damage
Stepped Tail Gripper
Tapered tail grip assures positive threading
Stepped tail allows for easier grabbing and tightening once engaged
Angled Tail
Provides quicker initial insertion
Lowers installation costs
UL Listed, CSA Listed, Mil-Spec Approved, RoHs Compliant
Quality construction
Low insertion force
No burrs or sharp edges
Stepped tail gripper
Angled tail
$
38.35
BAG
Qty:
Displaying: 1 - 12 of 12 Matching Items