Inductive load circuits, electronic circuits
Fitting
View:
Active Filters :
Part #:507247
- Technical Information
Agency Approvals / Specifications
UL
Application Method
Dispense System, Manual
Applications
Pipe Sealing, Thread Sealing
Breakaway Torque, Steel M10
12.0 N·m (110.0 in./lb. )
Color
White Off White
Cure Type
Anaerobic Cure
Key Characteristics
Immediate Low Pressure Sealing, Oil Tolerant, Strength Low Strength, Temperature High Temperature, Thixotropic
Operating Temperature
-55.0 - 200.0 °C (-65.0 - 400.0 °F )
Physical Form
Paste
Substrates
Metal, Metal Aluminum, Metal Steel - Galvanized Steel, Metal Steel - Stainless Steel, Thread Type Coarse, Thread Type Tapered
Technology
Acrylic
Viscosity, 20 RPM
540000.0 mPa·s
$
100.98
Qty:
Part #:508141
- Technical Specs Item Instant Adhesive Materials Bonded Metal, Plastic Begins to Harden - Adhesives 15 sec Viscosity - Adhesives 150 to 450 cPs Container Type - Adhesives Tube Container Size - Adhesives 3 g Adhesive Color Clear Series 454 Gap Fill 0.01 in Functional Cure Not Specified Full Cure 24 hr Temp. Range -65 Degrees to 250 Degrees F Specific Gravity 1.05 Chemical Type Cyanoacrylate VOC Content 20g/L Characteristics General purpose, bonds a variety of porous surfaces Tensile Strength 3200 psi Standards 29 CFR 1910.1200 Application For Difficult to Bond Surfaces, Irregular Rough and Acidic Surfaces, Use on Porous Substrates
$
8.22
Qty:
Part #:521212
- Technical Specs Item Pipe Thread Sealant Size 50 mL Container Type Tube Chemical Type Dimethacrylate Ester Strength Medium Color White Gas Pressure Range 10,000 psi Begins to Harden 24 hr Application Temp. Range 72 Degrees F Performance Temp. Range -65 Degrees to 400 Degrees F Flash Point 199.94 Degrees F Specific Gravity 1.21 @ 25 Degrees C Viscosity 350,000cP For Use With NF Application Thread sealing
$
24.92
Qty:
Part #:512443
- Technical Specs Item Instant Adhesive Materials Bonded Metal, Plastic, Rubber Begins to Harden - Adhesives 20 sec Viscosity - Adhesives 45 cPs Container Type - Adhesives Tube Container Size - Adhesives 3 g Adhesive Color Clear Series 495 Gap Fill 0.004 in Functional Cure Not Specified Full Cure 24 hr Temp. Range -65 Degrees to 250 Degrees F Specific Gravity 1.1 @ 23.89 Degrees C Chemical Type Cyanoacrylate VOC Content 20g/L Characteristics General Purpose Tensile Strength 2750 psi Standards 29 CFR 1910.1200 Application Bonds Rubber, Metal and Plastic Parts with Gaps up to 0.004 in
$
5.70
Qty:
Part #:509132
- Technical Specs Item Pipe Thread Sealant Size 10 mL Container Type Bottle Chemical Type Methacrylate Ester Color Purple Gas Pressure Range 10,000 psi Begins to Harden Not Specified Application Temp. Range 72 Degrees F Performance Temp. Range -65 Degrees to 300 Degrees F Flash Point 199.94 Degrees F Specific Gravity 1.02 @ 25 Degrees C Viscosity 14,000cP For Use With 7649, Primer 7088, or 7471 Application Locks and Seals Hydraulic and Pneumatic Fittings without Fouling the System, Suitable for Fittings Up to 50mm in Diameter Includes Pneumatic and Hydraulic Fittings
$
18.81
Qty:
Part #:509610
- Product details Legacy part 26392 250 mL Tube Anaerobic Sealant Medium Strength Semi-Rigid Cured State
$
127.18
Qty:
Part #:300656
- Catalog Number FNA-(amp) Dimensions 13⁄32” x 1 1⁄2” (10.3 x 38.1mm) Volts - 250Vac (1⁄10-6A) - 125Vac (6 1/4-15A) - 32Vac (20-30A) Amps 1⁄10-30A IR See data sheet # 2029 for interrupting rating by circuit voltage and fuse amp rating Agency Information - CE - UL Listed 1/10 to 8/10A @ 125/250Vac, 1-15A @ 125Vac, Guide JDYX, File E19180 - CSA Certified 1/10 to 10A @ 125Vac, Class 1422-01, File 53787 Typical Applications - Power electronic circuits with high inrush currents and fuse openings must be quickly apparent - Inductive load circuits where pin indication of open fuse condition is desired Construction - Silver-plated pin for positive, electrical signal activation - 12 amp and more versions are dual-tube construction:
Qty:
closeout
$5.93 MSRP
$
4.93
Qty:
closeout
$14.79 MSRP
$
12.31
Qty:
closeout
$19.41 MSRP
$
16.16
Qty:
closeout
$10.28 MSRP
$
8.56
Qty:
closeout
$25.94 MSRP
$
21.60
Qty:
Part #:508137
- Technical Specs
Anti-Seize Type General Purpose Anti-Seize Anti-Seize Brand Loctite Series LB 8150 Net Fill 4 oz Container Size 8 oz Anti-Seize Container Brush-Top Can Anti-Seize Base Aluminum Primary Additive Graphite Metal Free No For Use On Materials Aluminum, Soft Metals, Stainless Steel Conductive Yes Maximum Pressure Not Rated Anti-Seize Color Silver Odorless No Min. Operating Temp. -20 Degrees F Max. Operating Temp. 1,600 Degrees F NSF Rating Not Rated 50 State VOC Compliant No VOC Content 3 % Flammability Non-Flammable Flash Point 199 Degrees F Standards CFIA Listed Military Standard MIL-PRF-907E USDA Certified Biobased Product No
Qty:
Displaying: 1 - 22 of 22 Matching Items