Flexovit Usa
Campbell
View:
Active Filters :
- Brand: Campbell Flexovit Usa Jamesbury
Part #:500366
- Item # F1707, Type 1 Cutoff Wheel
Long Life - A60SSTThe RAZORBLADE wheel combines fast, chatter free cutting with exceptional wheel life, making it the wheel of choice where wheel usage is high, and wheel change downtime is a concern. In most applications Razorblade gives the lowest overall cost per cut of any angle grinder thin cutoff product.
Qty:
Part #:500566
-
#2 Twist Link Machine Chain, Zinc Plated, 100' per Carton
Uses General Utility Applications
Standard Material Low Carbon Steel
Standard Finish Bright, Zinc Plated and Galvanized
Design Factor 4 to 1
Packaged in Cartons, Order Unit is "Feet"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:500567
-
#35 Sash Chain, Zinc Plated, 100' per Carton
Counter-Balance Chain for Double Hung Window Sashes
Also for Arc Lamp Chain, Animal Chain
Standard Material Low Carbon Steel
Standard Finish Zinc Plated, Copper Glo, Solid Bronze
Design Factor 4 to 1
Packaged in Cartons, Order Unit is "Feet"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:502655
- Item # A1230, Type 27 Grinding Wheel
Metalhog Type 27 Grinding Wheels incorporate a blend of premium, semi-premium, and standard abrasive grain with custom bond systems. This produces a wheel with extremely aggressive, rapid grinding action, without sacrificing wheel life. METALHOG grinds up to 30% faster and 3 times longer than regular aluminum oxide products.Rapid Grind - AXT24SFast, aggressive stock removal.
Qty:
Part #:502824
-
2/0 Double Loop (Inco) Chain, Zinc Plated, 100' per Carton
Farm and Animal Chains, and Many General-Purpose Applications
Standard Material Low Carbon Steel
Standard Finish Zinc Plated, Galvanized
Design Factor 4 to 1
Packaged in Cartons, Order Unit is "Feet"
Made in the USA
Note Avoid Twisting in Suspension Applications
Campbell Recommends The Use of Proof Coil or Straight Link Coil Chain for Swing Set Applications
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:502912
-
3/16&rdquo Cold Shut, Steel, Zinc Plated
Connections for Chain and Attachments
When Using Cold Shuts with Chain, Use One Size Larger Than Chain Size
With A Hammer, Drive the Open End Through the Cold Shut Eye. Peen the Extended End to Prevent Opening
Order Unit is "Each"
Note Cold Shuts Should Not Be Reused After Closure Has Been Made
DO NOT EXCEED THE WORKING LOAD LIMIT
Do Not Use for Overhead Lifting or Hoisting
Qty:
Part #:503720
- Item # A0575, Type 27 Cutoff Wheel
Flexovit&rsquos RAZORBLADE 27 series of Thin Cutoff Wheels for angle grinders are an indispensable tool for the metalworker in both production and maintenance applications. Choose from 5 versatile specs depending on the job requirement. The Type 27 wheel shape facilitates flush cutting on flat surfaces. Heavy Duty - A24/30TThe RAZORBLADE 27 HD in 3/32&rdquo thickness will resist wheel wear in tough applications, including sheet metal and other jobs that involve heavy dressing action from the workpiece.
Qty:
Part #:504397
- Item # VB20R2, Grinding Carbide Bur
Flexovit carbide burs feature precision ground flutes. These flutes are manufactured on five axis CNC fluting machines resulting in precise control of tool geometry. This eliminates chatter and premature wear. With their chisel tooth cutting pattern, double cut carbide burs produce small distinct granular chips instead of long sharp slivers. This eliminates the loading of the bur&rsquos flutes and minimizes chatter. Double Cut Carbide Burs are the most popular, smooth cutting style burs and ideal for use on steel, stainless steel, alloys and exotics.
Qty:
Part #:504553
- Item # A0735, Type 27 Cutoff Wheel
Flexovit HIGH PERFORMANCE Type 27 Cutoff Wheels are the hardest working aluminum oxide wheels available. Precision made to ensure smooth and safe operation, the versatile A30S and heavy duty A24/30T specifications set the standards for fast cutting, and for rugged reliability and long life.Fast Cut - A30SFast cutting with good life. Ideal for most metals, including stainless and other hard alloys. An excellent &lsquoall-purpose&rsquo spec.
Qty:
Part #:505942
-
1/2" Grade 30 Proof Coil Chain, Zinc Plated, 40' per Round Pail
Excellent Low Carbon Steel Chain for General Purpose Applications
Frequently Used for Fabricating Tow Chains, Binding and Logging Chains, Marine and Other General Applications
Standard Finish Zinc Plated or Galvanized
Hallmarking "C3" and "USA" on 5/16" and Larger
Proof Tested
Design Factor 4 to 1
Packaged in Pails, Order Unit is "Each"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:507505
-
5/16" Alloy Clevis Slip Hook, Forged Alloy, Painted Orange
Material is Heat-Treated Alloy Steel
Alloy Hooks Are Painted Orange and Stamped "AH"
1/4" to 3/8" Hooks Have Drilled Hole for Latch Kit
Design Factor 3.5 to 1
Slip Hooks Are Designed to Allow Chain to Slip Through the Hook
Hooks are Sized by the Material Diameter of the Chain That They Engage. Make Sure the Hook Size and Chain Diameter are Compatible Before Attaching to Load
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:507886
- Item # H0552H, Blending & Finishing Conditioning Disc
Ideal for deburring, cleaning, blending and polishing.
Choose from 'Rolon', 'Spin-On' or 'Hook and Loop' mounting systems.
MediumA general purpose product, good for routine applications.
Qty:
Part #:508013
-
1/4" Grade 30 Proof Coil Chain, Zinc Plated, 141' per Round Pail
Excellent Low Carbon Steel Chain for General Purpose Applications
Frequently Used for Fabricating Tow Chains, Binding and Logging Chains, Marine and Other General Applications
Standard Finish Zinc Plated or Galvanized
Hallmarking "C3" and "USA" on 5/16" and Larger
Proof Tested
Design Factor 4 to 1
Packaged in Pails, Order Unit is "Each"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:508023
-
3/8" Grade 30 Proof Coil Chain, Zinc Plated, 63' per Round Pail
Excellent Low Carbon Steel Chain for General Purpose Applications
Frequently Used for Fabricating Tow Chains, Binding and Logging Chains, Marine and Other General Applications
Standard Finish Zinc Plated or Galvanized
Hallmarking "C3" and "USA" on 5/16" and Larger
Proof Tested
Design Factor 4 to 1
Packaged in Pails, Order Unit is "Each"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:508724
- Item # F5231, Type 1 Stationary Saw Cutoff Wheel
Multi Purpose - A30RBThis fast cutting, multi-purpose spec delivers premium performance on solids, structural steel, tubing and bar stock. Ideal on stainless steel and other alloys.
Qty:
Part #:508871
- Item # A3236, Type 27 Grinding Wheel
Flexovit HIGH PERFORMANCE Type 27 Grinding Wheels are the hardest working aluminum oxide wheels available. PrecisionFast Grind - A30SFast grinding with good wheel life. An excellent "all purpose" specification.
Qty:
Part #:509366
- Item # VF20R5, Grinding Carbide Bur
Flexovit carbide burs feature precision ground flutes. These flutes are manufactured on five axis CNC fluting machines resulting in precise control of tool geometry. This eliminates chatter and premature wear. Flexovit aluminum cut burs are manufactured in the USA from high quality carbide. The authentic milling cutter style flutes assure fast chip flow and extremely fast stock removal. These aluminum cut burs are machine ground to exact tolerances. The engineering of these tools offers a smooth quality surface finish.
Qty:
Part #:510602
- Item # Z4505F, Grinding, Blending & Finishing Flap Disc
Flexovit ZIRCOTEX Premium Type 27 and Type 29 Flap Discs are made with premium zirconia alumina abrasive cloth backed by a high strength fiberglass disc.ZA60ZIRCOTEX premium zirconia alumina discs are extremely productive and efficient. Ideal for high production grinding, blending, deburring and finishing, they perform well on a wide variety of materials including stainless and carbon steel. This durable grain resists loading or clogging on softer materials such as aluminum, brass, bronze and fiberglass. Available in Type 27 or Type 29, with a 7/8 arbor or a 5/8-11 spin-on zinc hub.
$
6.95
Qty:
Part #:510634
- Item # F1407, Type 1 Cutoff Wheel
Long Life - A60SSTThe RAZORBLADE wheel combines fast, chatter free cutting with exceptional wheel life, making it the wheel of choice where wheel usage is high, and wheel change downtime is a concern. In most applications Razorblade gives the lowest overall cost per cut of any angle grinder thin cutoff product.
Qty:
Part #:510975
- Item # F1207, Type 1 Cutoff Wheel
Long Life - A60SSTThe RAZORBLADE wheel combines fast, chatter free cutting with exceptional wheel life, making it the wheel of choice where wheel usage is high, and wheel change downtime is a concern. In most applications Razorblade gives the lowest overall cost per cut of any angle grinder thin cutoff product.
$
3.46
Qty:
Part #:510976
- Item # Z6000F, Grinding, Blending & Finishing Flap Disc
Flexovit ZIRCOTEX Premium Type 27 and Type 29 Flap Discs are made with premium zirconia alumina abrasive cloth backed by a high strength fiberglass disc.ZA40ZIRCOTEX premium zirconia alumina discs are extremely productive and efficient. Ideal for high production grinding, blending, deburring and finishing, they perform well on a wide variety of materials including stainless and carbon steel. This durable grain resists loading or clogging on softer materials such as aluminum, brass, bronze and fiberglass. Available in Type 27 or Type 29, with a 7/8 arbor or a 5/8-11 spin-on zinc hub.
Qty:
Part #:510996
- Item # Z4520F, Grinding, Blending & Finishing Flap Disc
Flexovit ZIRCOTEX Premium Type 27 and Type 29 Flap Discs are made with premium zirconia alumina abrasive cloth backed by a high strength fiberglass disc.ZA120ZIRCOTEX premium zirconia alumina discs are extremely productive and efficient. Ideal for high production grinding, blending, deburring and finishing, they perform well on a wide variety of materials including stainless and carbon steel. This durable grain resists loading or clogging on softer materials such as aluminum, brass, bronze and fiberglass. Available in Type 27 or Type 29, with a 7/8 arbor or a 5/8-11 spin-on zinc hub.
Qty:
Part #:511171
- Item # A1236, Type 27 Grinding Wheel
Flexovit HIGH PERFORMANCE Type 27 Grinding Wheels are the hardest working aluminum oxide wheels available. PrecisionFast Grind - A30SFast grinding with good wheel life. An excellent "all purpose" specification.
Qty:
Part #:511427
- Item # 44168, Cutting Small Diameter Diamond Blade
For dry or wet cutting operations using angle grinders, circular saws, and tile saws.
For cool, fast cutting in concrete, brick, marble, stone, tile and other masonry materials.
Standard - SDSG-ST A fast cutting, multi-application blade for cutting concrete and masonry, at an economical price.
Qty:
Displaying: 1 - 24 of 672 Matching Items