Hilti
Fluke
View:
Active Filters :
- Brand: Fluke Hilti J. H. Williams Milwaukee Starrett
Part #:805310
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
3.36
Qty:
Part #:508621
- Kwik Bolt 1 carbon steel wedge anchor
High-performance wedge anchor for cracked concrete and seismic (carbon steel)
Material, corrosionCarbon steel, zinc-plated
Head configurationExternally threaded
Drilling Method (AS)Hammer Drilling, Hollow Drill Bit Drilling
Material, corrosionCarbon steel, zinc-platedHead configurationExternally threadedDrilling Method (AS)Hammer Drilling, Hollow Drill Bit DrillingInstallation toolsTE 6-A36 Cordless rotary hammer, SIW 6AT-A22 Cordless impact wrench
$
4.72
Qty:
Part #:300994
-
Previous
Key features
One pair (red, black) of nickel plated pincers open to 5 mm
11.4 cm flexible insulated shaft
Recommended for use with TL222 and TL224 test leads
CSA listed
One year warranty
Next
Key features
One pair (red, black) of nickel plated pincers open to 5 mm
11.4 cm flexible insulated shaft
Recommended for use with TL222 and TL224 test leads
CSA listed
One year warranty
$
69.15
Qty:
Part #:300995
- Key features
SureGrip&trade AC285 has rubber overmolded surfaces for a firm reliable grip
Multi-purpose tooth pattern grips anything from fine gauge wire to a 20 mm (0.75 in) nut
Strong, nickel-plated steel jaws for a tight hold
Conforms to safety standard IEC61010-0312002 +A12008, CAT III 1000 V, CAT IV 600 V
10 A maximum, pollution degree 2, 2000 m altitude
Operating temperature -20 °C to 55 °C (-4 °F to 131 °F), 95% RH
One-year warranty
Qty:
Part #:300997
- Key features
Single probe pierces 0.25 to 1.5 mm insulated wire
Small pin allows self-healing of the insulation
1000 V, 10 A maximum
One year warranty
Qty:
Part #:301012
- Key features
Zippered polyester carrying case with padding and inside pocket.
Dimensions 218 x 128 x 64 mm (8.6 x 5 x 2.52 in)
Recommended for 11x series, 87v, 32x series, and most mid-sized DMMs
&ldquo...ample room for the quick reference card, the meter, and the leads (...) the material quality and construction should take abuse while protecting your expensive meter&rdquo- Jabit, verified customer
$
58.08
Qty:
Part #:301084
- Key features
Zippered carrying case with inside pocket belt loop and inside meter strap
One year warranty
Qty:
Part #:301182
- Key features
Zippered carrying case with inside pocket and belt loop
One year warranty
Qty:
closeout
Part #:301280
- Availability: Will be backordered (Typically arrives in 14 days)
$
299.23
Qty:
closeout
$
199.00
Qty:
closeout
$
129.00
Qty:
closeout
$
329.00
Qty:
Part #:301612
- Key features
SureGrip design so you can do your work comfortably. With interchangeable test lead set for multiple electrical applications. Compatible with all instruments and test probes that accept standard 4mm shrouded banana connectors. This handy all-in-one kit includes
AC220 SureGrip
Alligator Clip Set
TP220 SureGrip
Insulated Test Probe Set
TL224 SureGrip Silicone Test Lead Set
$
119.37
Qty:
Part #:301641
- Key features
48 inches (1.22 meter) PVC insulated test leads with banana plugs
CAT IV 600 V, CAT III 1000 V, CAT II 1000 V, only with protective cap
One-year warranty
Qty:
closeout
$
159.59
Qty:
closeout
Part #:301776
- CLOSEOUTS Only 1 Left!
- Key features
Companion to your scope or power quality meter to measure up to 400 A AC
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a compact shape
Take accurate current readings without breaking the circuit
Soft non-slippery overmold handle
Optional PM9081/001 BNC/Banana adapter for DMM's
Two ranges 40 A and 400 A, 10 and 1 mV/Amp output
Max. conductor Ø 32 mm
$
289.99
Qty:
closeout
$
395.00
Qty:
closeout
Part #:301870
- CLOSEOUTS Only 1 Left!
- Key features
Current Range0.1 to 100A DC or 0.1 to 70A AC
Basic Accuracy (DC to 1kHz) 100mV/A setting50mA to 10A +/- 3% of reading + 50mA 10mV/A setting50mA to 40A +/- 4% of reading + 50mA 40A to 80A +/- 12% of reading + 50mA 80 to 100A +/- 15% of reading
Output Signal10A range 100mV/A 100A range 10mV/A
Bandwidth1Hz to 20kHz
Working Voltage600V AC rms
Maximum Conductor Size11.8 mm (.46 inch) diameter
Safety RatingIEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V
$
440.00
Qty:
Qty:
closeout
$
165.00
Qty:
Part #:302002
- Key features
Converts a DMM to a thermometer
For use with type-K thermocouples in low voltage applications (below 24 V AC, 60 V DC)
Measurement range -50 to 1000 °C (probe dependent)
One year warranty
Qty:
Displaying: 25 - 48 of 336 Matching Items