Ideal
Fluke
View:
Active Filters :
- Brand: Fluke Ideal Pass & Seymour (Legrand)
Part #:301615
- Key features
DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
Right angle connector on one end and straight connector on the other
Reinforced strain relief
1.5 meter silicone-insulated wire resists heat & cold
CAT IV 600 V, CAT III 1000 V, 10 A rating. CSA listed
One year warranty
$
53.33
Qty:
Part #:304331
- 20A Double Pole, Double Throw Switch, Brown
Oversize silver alloy contacts for long life and better heat dissipation.
Side wired terminals accept #14 - #10 AWG copper or copper-clad conductors.
Fiber terminal insulation barriers standard.
Can be mounted in standard device boxes or in NEMA 1 sheet steel enclosures.
Bodies, covers, and toggles molded of durable nylon.
Single Pole-Double Throw and Double Pole-Double Throw.
Locking Switches supplied with one 1498-NT key.
Normally open.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
CSA File Number 17949
Qty:
Part #:304966
- Extremely durable for hard-use institutional applications. Spring-loaded covers close automatically when plugs are removed. Die-cast copper-free aluminum construction. Stainless steel springs. Screws and spring covers are chrome-plated brass. Baked-on lacquer finish. Heavy rubber gaskets provide positive seal. All covers below are for 4 screw mounting only. Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
$
12.35
Qty:
Part #:304993
- Key features
AC220 SureGrip&trade Alligator Clip Set
TP1 Slim-Reach&trade Test Probes (flat bladed)
TL224 SureGrip&trade Silicone Test Lead Set (straight to right)
One year warranty
$
121.58
Qty:
Part #:306993
- Key features
&ldquoThis meter is perfect for my use as I do HVAC and Electrical work and this will give me what I need for troubleshooting and performance of equipment.&rdquo - Paul
Automatically measure AC and DC voltage up to 600 V with precise digital resolution
Measure current up to 100 A without breaking the circuit with OpenJaw&trade design
Troubleshoot resistance problems up to 1000 &Omega
Work in tight spaces with detachable Slim Reach probe tips
$
196.02
Qty:
Part #:307265
- Key features
Digital multimeter designed specifically for HVAC professionals
Includes built-in thermometer to measure temperature from -40°C to 400°C (-40°F to 752°F)
Provides microamps to test flame sensors
Features low input impedance to helps prevent false readings due to ghost voltage
Presents a large white LED backlight for working in poorly lit areas
Qty:
closeout
$94.22 MSRP
$
50.21
Part #:308114
- CLOSEOUTS Only 3 Left!
- In-Line Portable 15A GFCI, Manual Reset
In-line portable GFCI interrupter
Qty:
Part #:308442
- 60A Power Interrupting Receptacle, Diecast with Lift Lid Enclosure
$
964.68
Qty:
closeout
$
159.15
Qty:
Part #:310204
- Key features
Ultimate troubleshooting tool for electricians and instrumentation professionals
Combines the functionality of a loop calibrator with the power of a precision 1000 V, 440 mA True-RMS digital multimeter
Optional IR3000FC module for wireless data logging capabilities via Fluke Connect® mobile App
Includes 24 V loop power supply
Features a very large dual display with enhanced two-level backlight brightness settings
Qty:
Part #:310841
- radiant® Spec Grade 15A Self Test GFCI Receptacle, Brown
Protects against shock caused by ground-fault occurrences. Unlike breaker alternatives, GFCI receptacles make it easier to fix trips with a reset button right on the device.
Conducts an industry-leading automatic self-test every 3 seconds. If the device ever fails, the indicator light flashes to signal it should be replaced.
Equipped with proven SafeLock protection feature if critical components are damaged and protection is lost, power to the outlet is disconnected.
Extends GFCI protection to "downstream" outlets when used with feed-thru wiring configuration. Note Will cut power to face and downstream outlets if wired incorrectly.
Replaces any standard receptacle with ease, in as little as 10 minutes.
Features durable, high-impact resistant thermoplastic construction.
More color options available to fit any style, including finishes to match current hardware and lighting trends.
Complete the look with a sleek, screwless radiant® Wall Plate, and coordinate with other designer switches and outlets available from the radiant® Collection.
Qty:
Part #:308441
- Power Interrupting Device Accessory Box and Plate
Qty:
Part #:300433
- 60A Power Interrupting Plug, Metallic, Yellow
Quality Materials, durability, and time-tested design
cULus ListingNumber 146159
Qty:
Part #:301703
- Greenie® Grounding Wire Connector, Model 92® Green, Box of 100
For grounding and bonding
High-leverage, contoured wing design provides superior torque on every twist
Wide range, live-action spring handles small combinations and expands to accommodate large combinations as you need it
Copolymer shell expands for smooth, progressive tightening providing dependable connections
Removable for repeat usage on same size or larger combinations
UL 486C & UL 467 Listed
More power with every twist.
The Wing-Nut® Wire Connector provides an easy, secure grip when connecting a wide range of wires. The specially designed contoured wings make for extra torque and quick work on any electrical job. The wide range, live-action spring is flexible enough to handle small combinations with ease but then expands to accept large combinations when you need it. It can also be reused on same size or larger combinations for quick and easy circuit changes and additions.
The Wing-Nut® also features a tough, copolymer, flame-retardant shell that withstands environmental extremes with a deep skirt that provides maximum dielectric protection to prevent flash-over and turned-back strands.
The Red Model 452® offers the widest range winged connector in the industry from 2 #18 to 4 #10.
Greenie Grounding Connectors fully meet the intent of the NEC and specifically aids in compliance with the following
Article 250 Grounding
250-146 Connecting Receptacle Grounding Terminal to Box
250-148 Continuity and Attachment of Equipment Grounding Conductors to Boxes
(B) Grounding continuity
(D) Nonmetallic boxes
Qty:
Part #:300190
- Twister® Wire Connector, Model 341® Tan, Box of 100
Swept-Wing Design Industry's Choice for Comfort
Preferred Choice for Residential Jobs
Comfortable swept wings offer extra leverage and less effort on large wire combinations
Expanding square-wire spring supports a wide range of common wiring configurations
Durable copolymer shell expands for smooth, progressive tightening that provides dependable connections
Hexagonal top with ribbed cap allows for quick fingertip start as well as use of standard 5/16 in. nutdriver for fast installation
Quick take-up on even the toughest combinations, including solid-to-stranded
Qty:
Part #:307274
- Yellow 77® Plus, 1-Quart Squeeze Bottle
IDEAL Yellow 77® Plus Wire pulling lubricant is a wax-based formula offering superior lubricity due to the Rapid Glide&trade polytetrafluoroethylene additive &mdash great for tough pulls. It is safe to use with all cable types. It won't break down/separate after repeated exposure to freezing temperatures and dries to a thin, non-conductive film that won't clog conduit. Yellow 77® Plus has a creamy texture and clings to cable throughout long pulls. Apply conveniently and uniformly by hand or brush. It is a homogeneous blend that requires no mixing and forms surface coat to control evaporation, so it won't dry out. It is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. Lubricant remains stable in high temperature from 32°F to 190°F (0°C to 88°C). It comes in 1 qt squeeze bottle, 1-gallon bucket, and 5-gallon bucket. Lubricant is UL listed.
Rapid Glide&trade polytetrafluoroethylene additive provides greater lubricity than other wax-based lubricants &mdash great for tough pulls
Safe to use with all cable types
Clings to cable throughout long runs, even where moisture is present
Remains temperature stable from 32°F to 190°F (0°C to 88°C)
Environmentally safe &ndash non-toxic, non-flammable and non-corrosive
Qty:
Part #:315113
- Heavy Duty Spec Grade Single Receptacles, Back and Side Wire, 20A, 250V, Brown
Corrosion-resistant, plated steel strap locked in to face and back body to resist pulling away from face/body assembly.
One-piece brass, triple-wipe power contacts for lasting retention.
Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring.
Impact-resistant nylon face and thermoplastic back body.
Internal screw-pressure-plate back wire capable of accepting #14 - #10 AWG solid or stranded copper or copper-clad wire.
Terminal compartments isolated from each other for positive conductor containment.
Tri-drive terminal and mounting screws.
Auto-ground clip assures positive ground.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
cUL ListingNumber 140596
Qty:
Part #:303701
- One Gang Heavy Cast Aluminum Cover Duplex Receptacle Horizontal, Gray
Extremely durable for hard-use institutional applications.
Spring-loaded covers close automatically when plugs are removed.
Die-cast copper-free aluminum construction.
Stainless steel springs.
Screws and spring covers are chrome-plated brass.
Baked-on lacquer finish.
Heavy rubber gaskets provide positive seal.
All covers below are for 4 screw mounting only.
Comply with 2005 NEC Section 406.8(A) and 406.8(B)(2).
CSA File Number 16807
Qty:
Part #:304510
- 15A NEMA L515 Duplex Receptacle
Compact, impact-resistant nylon face and body are ultrasonically welded together for unrivaled strength.
Face color coding by voltage facilitates locating and mating of proper devices.
One piece, high-grade brass contacts offer excellent conductivity and heat-rise resistance.
Clearly marked NEMA configuration, rating, and third-party listing on each unit's face.
Single-piece, solid brass mounting strap is free of easily loosened rivets found on other brands.
Side and external screw-pressure-plate back wire capability.
Accepts #14 - #10 AWG.
CSA File Number 16063
Qty:
Part #:300790
- Hard Use Spec Grade Receptacle, Back and Side Wire, 20A, 125V, Brown
Corrosion-resistant, plated and tabbed steel strap locked in to face and back body to resist pulling away from face/body assembly.
.032 inch thick, brass, triple-wipe power contacts for lasting retention.
Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring.
Impact-resistant nylon face.
8 hole internal screw-pressure-plate back wire terminals accept #10 - #14 AWG solid or stranded copper or copper-clad conductors.
Terminal compartments isolated from each other for positive conductor containment.
Tri-drive terminal and mounting screws.
Auto-ground clip assures positive ground.
For covering patents, see www.legrand.us/patents.
For compatible wall plate options, from our TradeMaster unbreakable plates to our radiant screwless plates to our metal wall plates, click here.
cULus ListingNumber 140596
Qty:
Part #:302600
- Midget Flanged Outlet - Black Face, Gray Flange
Qty:
Part #:310921
- Pre-Insulated Crimp Connector, Model 49, Box of 1,000
Crimp connectors from IDEAL are designed for making fast, permanent, pressure-type connections. Whether there is a connection in a high vibration environment or installations at an OEM, there is a solution available. IDEAL&rsquos Pre-Insulated Crimp Connectors have a compact design that fits easily into tight locations.
Connectors are translucent, allowing for confirmation of proper connection
Compact design fits easily into tight locations
Flared skirt protects against turned-back strands
Beveled opening eases wire entry
Tough UL 94V-2 flame-retardant shell rated at 105°C (221°F)
$
0.23
Qty:
Displaying: 1 - 24 of 643 Matching Items