J. H. Williams
Greenlee
View:
Active Filters :
Part #:521244
- Extended DTAP Kit
Complete hole drilling, tapping and deburring/countersinking in one operation using power drill to save time and labor
Back tapered beyond tap to prevent thread damage from over-drilling
Made from hardened high-speed steel versus carbon-steel for longer life
High wuality hex shank to ensure strong connection to drill chuck
Designed to tap up to 10 gauge metal
Quick change adaptor included
Qty:
Part #:506147
- Hand-Held Cable Cutter
Easily cuts heavier copper and aluminum cables up to 2/0 (70 mm²)
Precision-ground, shear-action, curved cutting blades
727 has PVC-covered, high-leverage handles for easier cuts
Heat-treated for long life
Made of heavy-duty forged steel
Rust-resistant black oxide finish
Qty:
Part #:510307
- 240' Steel Fish Tape
Oil-tempered spring steel for excellent fishing performance
Dirt-free tape finish keeps hands cleaner during use
Advanced comfort handle grip reduces fatigue
Superior rapid tape pay-out and rewind
Smaller Fish Eye with offset bend for improved fishing ability
Improved low profile tip for easy fishing through all sizes of conduit
Viewing Port gives visibility to remaining tape and ability to remove jobsite debris quickly
Rugged case design improves drop impact capability
Flared case with Grip Ridges for no slip handling
Fish tape is available in 50 FT (15
2 m), 65 FT (19
8 m), 125 FT (38
1 m) and 240 FT (73
2 m) lengths
1/8 IN, 1/4 IN and flat steel profiles to accommodate different fishing situations
Qty:
Part #:507333
- 67362 V & B Supreme Replacement Handle for 10# to 16# Sledge Hammers. Eye Size 1-3/8" x 1". Length 36". Includes one wood wedge, one steel wedge and instructions. MADE IN USA.
$
13.88
Qty:
Qty:
Part #:506907
- The 16oz 99 hammers are based on a unique rip hammer design originated by Vaughan. The extra steel behind the striking face, and the deep throat, octagon neck and smoothly swept claws creates a hammer that looks as good as it feels in use. Rust-resistant powder coat finish. MADE IN USA.
Qty:
Part #:506922
- R99 has Polished striking head, sides and claw. Octagon neck and round face. Forged steel from head to heel. Exclusive, Shock-Blok&trade plug in head absorbs shock. Non-slip cushioned PVC grip is molded to handle. "MADE IN THE USA".
Qty:
Part #:507326
- Supreme Hickory replacement handle for 2 lb to 4 lb Blacksmith Hammer. Oval Eye 1 inch x 3/4 inch. Overall length 16 inches. One wood wedge, two steel wedges and instructions included. MADE IN USA.
Qty:
Part #:508143
- DB200 Heads are partially filled with steel shot to increase impact and reduce rebound. The one-piece threaded faces feature a shoulder to absorb the force of side blows, protecting the threads. The one-piece, aluminum alloy heads are serrated to help keep the faces tight. A neoprene compound grip on the handle absorbs shock. Supplied with two white nylon faces. MADE IN ENGLAND.
Qty:
$
48.45
Qty:
Part #:507402
- Technical Specs
Item Rust Treatment Color Opaque Container Size 1 qt Dry Time 20 min Application Method Brush Or Commercial Sprayer
Qty:
Part #:512443
- Technical Specs Item Instant Adhesive Materials Bonded Metal, Plastic, Rubber Begins to Harden - Adhesives 20 sec Viscosity - Adhesives 45 cPs Container Type - Adhesives Tube Container Size - Adhesives 3 g Adhesive Color Clear Series 495 Gap Fill 0.004 in Functional Cure Not Specified Full Cure 24 hr Temp. Range -65 Degrees to 250 Degrees F Specific Gravity 1.1 @ 23.89 Degrees C Chemical Type Cyanoacrylate VOC Content 20g/L Characteristics General Purpose Tensile Strength 2750 psi Standards 29 CFR 1910.1200 Application Bonds Rubber, Metal and Plastic Parts with Gaps up to 0.004 in
$
5.70
Qty:
Part #:511836
- Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Low Threadlocker Color Purple Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 10 mL Chemical Type Dimethacrylate Ester For Fastener Dia. Up to 1/4 in Begins to Harden 20 min Series 222MS Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.05 Viscosity 1,200 to 5,000 cP Removable With Hand Tools Application For Locking All Fasteners 1/4 in or Smaller. Removable With Hand Tools Standards ASTM D5363, MIL-S-46163A Type II Grade M, NSF P1 Certified, RoHS Certified
$
20.50
Qty:
Part #:509131
- Technical Specs Item Wicking Grade Threadlocker Threadlocker Classification Wicking Grade Threadlocker Threadlocker Strength Medium Threadlocker Color Green Threadlocker Disassembly Removable Physical Form Liquid Threadlocker Container Bottle Size 10 mL Chemical Type Anaerobic For Fastener Dia. Up to 1/2 in Begins to Harden 20 min Series 290 Gap Fill 0.003 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Greater Than 93.3 Degrees C Specific Gravity 1.07 Viscosity 25 to 55 cP Removable With Hand Tools Application For Locking Preassembled Fasteners No. 2 to 1/2 in . Penetrates By Capillary Action Standards MIL-S-46163A Type III Grade R, NSF P1/ANSI 61 Certified, OSHA Hazard Communication, RoHS Certified
$
20.50
Qty:
Part #:509662
- Technical Specs Item Pipe Thread Sealant Size 50 mL Container Type Tube Chemical Type Dimethacrylate Ester Strength Low Color White Full Cure 24 hr Begins to Harden Primed 1-3 hr, Unprimed 6-24 hr Application Temp. Range 72 Degrees F Performance Temp. Range -65 Degrees to 300 Degrees F Flash Point 212 Degrees F Specific Gravity 1.25 Viscosity 17,000/50,000 Thixotropic For Use With Use on Coarse Metal Threads Application Lock and Seal Metal Pipes and Fittings to Prevent Loosening and Leakage from Shock and Vibration
$
32.84
Qty:
Part #:509132
- Technical Specs Item Pipe Thread Sealant Size 10 mL Container Type Bottle Chemical Type Methacrylate Ester Color Purple Gas Pressure Range 10,000 psi Begins to Harden Not Specified Application Temp. Range 72 Degrees F Performance Temp. Range -65 Degrees to 300 Degrees F Flash Point 199.94 Degrees F Specific Gravity 1.02 @ 25 Degrees C Viscosity 14,000cP For Use With 7649, Primer 7088, or 7471 Application Locks and Seals Hydraulic and Pneumatic Fittings without Fouling the System, Suitable for Fittings Up to 50mm in Diameter Includes Pneumatic and Hydraulic Fittings
$
18.81
Qty:
Part #:509624
- Technical Specs Item Instant Adhesive Materials Bonded Plastic, Rubber Begins to Harden - Adhesives 15 sec Viscosity - Adhesives 20 cPs Container Type - Adhesives Tube Container Size - Adhesives 3 g Adhesive Color Clear Series 406 Gap Fill 0.004 in Functional Cure Not Specified Full Cure 24 hr Temp. Range -65 Degrees to 250 Degrees F Specific Gravity 1.05 Chemical Type Cyanoacrylate VOC Content 20g/L Characteristics Bonds Quickly Tensile Strength 3200 psi Standards 29 CFR 1910.1200, Commercial Item Standard A-Aa-3097 Application Bonds Plastics and Elastomeric Materials
Qty:
Part #:509290
- Technical Specs
Anti-Seize Type General Purpose Anti-Seize Anti-Seize Brand Loctite Series LB 8065 Net Fill 0.705 oz Container Size 0.7054 oz Anti-Seize Container Stick Anti-Seize Base Copper Primary Additive Graphite Metal Free No Water Resistant No Conductive Yes Maximum Pressure Not Rated Anti-Seize Color Copper Odorless No Min. Operating Temp. -20 Degrees F Max. Operating Temp. 1,800 Degrees F NSF Rating Not Rated 50 State VOC Compliant No VOC Content 0 % Standards CFIA Listed Military Standard MIL-PRF-907F USDA Certified Biobased Product No
$
10.87
Qty:
Part #:509276
- Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength Medium Threadlocker Color Blue Threadlocker Disassembly Removable Physical Form Solid Threadlocker Container Stick Size 0.67 oz Chemical Type Anaerobic For Fastener Dia. 1/4 in to 3/4 in Begins to Harden 5 min Series 248 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Product is a solid Specific Gravity 1.1 Viscosity Semisolid Removable With Hand Tools Application For Fasteners Between 1/4 and 3/4 in Dia Convenient Stick Package Standards OSHA Hazard Communication
Qty:
Part #:509285
- Technical Specs Item Threadlocker Threadlocker Classification Threadlocker Threadlocker Strength High Threadlocker Color Red Threadlocker Disassembly Permanent Physical Form Solid Threadlocker Container Stick Size 0.67 oz Chemical Type Anaerobic For Fastener Dia. Up to 3/4 in Begins to Harden 5 min Series 268 Gap Fill 0.005 in Full Cure 24 hr Temp. Range -65 Degrees to 300 Degrees F Flash Point Product is a solid Specific Gravity 1.1 Viscosity Semisolid Removable With Heat and Hand Tools Application For Fasteners Up to 3/4 in Dia Convenient Stick Package Standards OSHA Hazard Communication
Qty:
Part #:524020
- Technical Specs
Anti-Seize Type General Purpose Anti-Seize Anti-Seize Brand Loctite Series LB 8008 Net Fill 128 oz Container Size 8 lb Anti-Seize Container Can Anti-Seize Base Copper Primary Additive Graphite Metal Free No For Use On Materials Aluminum, Stainless Steel Conductive Yes Maximum Pressure Not Rated Anti-Seize Color Copper Odorless No Min. Operating Temp. -20 Degrees F Max. Operating Temp. 1,800 Degrees F NSF Rating Not Rated 50 State VOC Compliant No VOC Content 3 % Flammability Non-Flammable Flash Point 199 Degrees F Standards CFIA Listed Military Standard MIL-PRF-907F USDA Certified Biobased Product No
Qty:
Part #:516690
- Technical Specs Item Insulating and Sealing Tape Material Silicone Width 1 in Length 120 in Thickness .50 mm Color Red Performance Temp. Range -65 Degrees to 500 Degrees F Application Automotive, Corrosion, Ideal for Industrial, Marine, Plumbing, Seals and Protects Against Air and Water Leakage, Such As Electrical Insulation, and Electrical Uses, and Scratches
Qty:
Part #:506286
- Product details Thread Sealant Brush Top Can 1 Pint Seal Plastic Pipe Threads description Specially formulated without the added lubricity of PTFE to avoid cracked fittings caused by over-tightened plastic joints. applications Plastic pipes
$
46.19
Qty:
Part #:521805
- Technical Specs Item Penetrating Lubricant Lubricant Brand Loctite Series Penetrating Oil Net Fill 13.52 oz Container Size 400 mL Lubricant Container Aerosol Can Lubricant Base Mineral Oil Min. Operating Temp. -38 Degrees F Max. Operating Temp. 113 Degrees F NSF Rating Not Rated 50 State VOC Compliant No VOC Content 8 % Lubricant Color Colorless Odorless No Flammability Flammable GHS Flammability Rating Flammable Aerosol (Category 2) Flash Point 58 Degrees F USDA Certified Biobased Product No Operating Temp. Range -38 Degrees to 113 Degrees F Min. Operating Temp. Range -50 Degrees to 0 Degrees F Max. Operating Temp. Range 101 Degrees to 150 Degrees F
Qty:
Displaying: 25 - 48 of 390 Matching Items