Delta Faucet Company
HVAC and Plumbing
View:
Active Filters :
- Main Category: HVAC and Plumbing
- Brand: Delta Faucet Company Modine Watts Regulator
Part #:700506
-
This 3/4 inch steam radiator gate valve is used as a shutoff valve in steam or hydronic heating systems. It feature a bronze body with thread x male union connections.
Bronze body
Thread x male union connections
Rising stem
Solid wedge
Qty:
Part #:700505
- This 1/2 inch steam radiator gate valve is used as a shutoff valve in steam or hydronic heating systems. It feature a bronze body with thread x male union connections.
Bronze body
Thread x male union connections
Rising stem
Solid wedge
Qty:
Part #:700507
- This 3/4 inch steam radiator gate valve is used as a shutoff valve in steam or hydronic heating systems. It feature a bronze body with thread x male union connections.
Bronze body
Thread x male union connections
Rising stem
Solid wedge
Qty:
Part #:700511
- This 3/4 inch steam radiator gate valve is used as a shutoff valve in steam or hydronic heating systems. It feature a bronze body with thread x male union connections.
Bronze body
Thread x male union connections
Rising stem
Solid wedge
Qty:
closeout
$
3.04
Qty:
closeout
$
6.14
Qty:
closeout
$20.15 MSRP
$
9.99
Qty:
closeout
$15.80 MSRP
$
8.00
Qty:
closeout
$5.35 MSRP
$
3.99
Qty:
closeout
$21.95 MSRP
$
11.99
Qty:
closeout
$6.95 MSRP
$
3.99
Qty:
closeout
$
12.59
Qty:
closeout
$
1.33
Qty:
closeout
$113.50 MSRP
$
63.88
Qty:
Part #:284-5H0730350000
- MOD5H73035 Prop Fan Timer
Part Description
Gas Fired Unit Heater Fan Timer
Type Fan Timer
Used On PD30/PD100/PD150/PD200 Gas Fired Unit Heater
$
115.00
Qty:
Part #:559118
- The LFMMVM1 Thermostatic Mixing Valves maintain and limit mixed hot water to a desired, selectable temperature. The LFMMVM1 valves can be set to any temperature between 80°F and 120°F with flow rates as low as 0.5 gpm and as high as 12 gpm (refer to capacity chart on back). This mixing valve series is listed under ASSE 1017 for valves used in hot water source applications, ASSE 1069 for single-pipe, tempered water applications and ASSE 1070 for valves used in individual or multiple fixture applications and also listed IAPMO cUPC. The LFMMVM1's feature Lead Free construction to comply with Lead Free installation requirements. The LFMMVM1 uses a double throttling design to control both the hot and cold water supply to the mixed outlet. The superior flow characteristics of this valve provide accurate temperature control (±3°F) with low pressure drop across the rated flow range. As an added feature, the LFMMVM1 series incorporates integral inlet filter washers and check valves in both the hot and cold water inlets to protect against cross flow.
Features
Lead Free cast copper silicon alloy body construction
Solid wax hydraulic principle thermostat assures dependable mixing of hot and cold water
Thermostat controls both hot and cold water
Available union connection models include threaded (-UT), solder (-US), PEX (-PEX), PEX F1960 cold expansion fittings (-CEF), CPVC (-CPVC), Quick-Connect (-QC), or w/press
Adjustment cap with locking feature
Integral filter washers and check valves
Qty:
Part #:284-9F0302250000
- MOD9F30225 115v 1/6 HP Blower Motor 9F0302250000
Part Description
Steam/Hot Water Unit Heater Fan Motor
Type Fan Motor
Used On HSB121/V139/HC121 Steam/Hot Water Unit Heater
Voltage Rating 115 Volt
Power Rating 1/6 HP
$
495.00
Qty:
Qty:
Part #:31-0832136
Qty:
Part #:31-0887122
Qty:
Part #:31-0887135
-
This check repair kit provides all the parts necessary to repair the first check on a 1 1/4 to 2 inch lead free reduced pressure zone assembly, model 909M1. This kit consists of all parts necessary to repair the applicable reduced pressure zone assembly. All parts are genuine and original to the valve.
Features
Parts are specific to valve size
All parts are made of high quality materials
Factory replacement parts
No special tools required for servicing
Qty:
Part #:31-0887136
-
This check repair kit provides all the parts necessary to repair the second check on a 3/4 to 1 inch lead free reduced pressure zone assembly, model 909M1. This kit consists of all parts necessary to repair the applicable reduced pressure zone assembly. All parts are genuine and original to the valve.
Features
Factory replacement parts
All parts are made of high quality materials
Parts are specific to valve size
No special tools required for servicing
Qty:
Part #:31-0794059
Qty:
Part #:31-0794060
-
This total relief valve repair kit provides all the parts necessary to repair the relief valve on a 1 1/4 to 2 inch lead free reduced pressure zone valve assembly. This kit consists of the relief valve assembly, seat, seat O-ring, 2 piston O-rings, and lubricant. All parts are genuine and original to the valve.
Features
Original parts insure long service life
All parts are made of high quality materials
Serviceable in the field
No special tools required
Qty:
Displaying: 1 - 24 of 28 Matching Items