Honeywell Residential
HVAC and Plumbing
View:
Active Filters :
- Main Category: HVAC and Plumbing
- Brand: Honeywell Residential Nutone Watts Regulator
Part #:700506
-
This 3/4 inch steam radiator gate valve is used as a shutoff valve in steam or hydronic heating systems. It feature a bronze body with thread x male union connections.
Bronze body
Thread x male union connections
Rising stem
Solid wedge
Qty:
$
13.45
Qty:
Part #:700505
- This 1/2 inch steam radiator gate valve is used as a shutoff valve in steam or hydronic heating systems. It feature a bronze body with thread x male union connections.
Bronze body
Thread x male union connections
Rising stem
Solid wedge
Qty:
Part #:700507
- This 3/4 inch steam radiator gate valve is used as a shutoff valve in steam or hydronic heating systems. It feature a bronze body with thread x male union connections.
Bronze body
Thread x male union connections
Rising stem
Solid wedge
Qty:
Part #:700511
- This 3/4 inch steam radiator gate valve is used as a shutoff valve in steam or hydronic heating systems. It feature a bronze body with thread x male union connections.
Bronze body
Thread x male union connections
Rising stem
Solid wedge
Qty:
Part #:284-S87C1030
- HONS87C1030 Dsi Control 21 Sec. Lockout,dual Rod
Part Description
Ignition Control Module
Type Direct Spark, Electronic, Pilot
Fuel Type Natural/Liquid Propane Gas
Flame Sense Type Two Rod
Ignition Source Internal High Voltage Spark Generator
Ignition Sequence 1-Trial
Ignition Trial Time 21 Second
Flame Failure Response Time 0.8 Second at 5 Microamp
Power Rating 24 Volt AC at 60 Hertz
Size 4-1/16 Inch Width x 1-15/16 Inch Length x 5-1/4 Inch Height
Temperature Rating -40 to 175 Deg F
Application Gas Fired Furnace, Boiler, Heating Appliance
Approval CSA
Lockout Timing 21 Second
Flame Failure Re-Ignition Time 0.8 Second
Qty:
Part #:284-S8610U3009
- HONS8610U3009 Universal Intermittent Pilot Control For Lp & Natural Gas With Field Selectable Prepurge & Ignition Trial Timings, For Single & Dual Rod Applications, Suitable For Use With Vent Dampers
Part Description
Ignition Control Module
Type Universal, Intermittent Pilot
Fuel Type Natural/Liquid Propane Gas
Flame Sense Type Single or Dual Rod
Ignition Source Internal High Voltage Spark Generator
Ignition Sequence Continuous Retry
Ignition Trial Time 15/90 Second
Prepurge Time Configurable to 30 Second/No Pre-Purge
Flame Failure Response Time 2 Second
Valve Rating 1 Amp Pilot/2 Amp Main at 165 Deg F, 1 Amp Pilot/Main at 175 Deg F
Power Rating 24 Volt AC at 60 Hertz
Size 5-7/16 Inch Width x 2-5/8 Inch Depth x 3-15/16 Inch Height
Temperature Rating -40 to 165 Deg F
Application Warm Air Furnace, Heating Appliance
Approval CSA
Includes Damper Connection, Automatic Vent Damper Plug
Qty:
Part #:284-WT8840B1000
- HONWT8840B1000 Water Heater Gas Valve, Standing Pilot With Piezo, Setpoint 55-155f, Spud Length 1", Bracket=centered, Reg Setting 5" Wc, Natural Gas
Part Description
Water Heater Control
Item Water Heater Control
Type 90 Degree
Port Connection 1/2 Inch Threaded x 1/2 Inch Inverted Flare
Input Supply Rating 350 to 850 Millivolt DC
Temperature Rating 0 to 150 Deg F
Pressure Rating 5 Inch WC
Media Handled Gas
Inclusions/Features Integrated NTC Temperature Sensor
Application Water Heater
Applicable Standard CSA 6.20/4.6, CAN/CSA C22.2, ANSI Z21.20/Z21.23/Z21.78/Z21.87
Tank Insulation Size 1 Inch
Ambient Temperature 32 to 150 Deg F, -40 to 150 Deg F (Storage), 55 Deg F to 155 Deg F Valve (Set Point)
Mounting Position Upright
Capacity 30 Foot per 3 Hour to 75 Foot per 3 Hour
Humidity 95 Percent (Non-Condensing) at 104 Deg F
Qty:
Part #:559118
- The LFMMVM1 Thermostatic Mixing Valves maintain and limit mixed hot water to a desired, selectable temperature. The LFMMVM1 valves can be set to any temperature between 80°F and 120°F with flow rates as low as 0.5 gpm and as high as 12 gpm (refer to capacity chart on back). This mixing valve series is listed under ASSE 1017 for valves used in hot water source applications, ASSE 1069 for single-pipe, tempered water applications and ASSE 1070 for valves used in individual or multiple fixture applications and also listed IAPMO cUPC. The LFMMVM1's feature Lead Free construction to comply with Lead Free installation requirements. The LFMMVM1 uses a double throttling design to control both the hot and cold water supply to the mixed outlet. The superior flow characteristics of this valve provide accurate temperature control (±3°F) with low pressure drop across the rated flow range. As an added feature, the LFMMVM1 series incorporates integral inlet filter washers and check valves in both the hot and cold water inlets to protect against cross flow.
Features
Lead Free cast copper silicon alloy body construction
Solid wax hydraulic principle thermostat assures dependable mixing of hot and cold water
Thermostat controls both hot and cold water
Available union connection models include threaded (-UT), solder (-US), PEX (-PEX), PEX F1960 cold expansion fittings (-CEF), CPVC (-CPVC), Quick-Connect (-QC), or w/press
Adjustment cap with locking feature
Integral filter washers and check valves
Qty:
Part #:284-VR8200A2132
- Substitute Items:
- W-R36C03-300 24v 1/2" X 3/4" Standing Pilot Thermocouple Actuated Gas Valve With LP Kit HONVR8200A2124 24v Standing Pilot Natural Gas Valve 1/2" X 1/2" W/36" Thermocouple & LP Kit 130,000 BTU RBS720-400 24v 1/2" X 3/4" Standing Pilot Gas Valve Includes LP Kit & Bushings 150,000 BTU RBS720-402 24v 1/2" X 3/4" Standing Pilot Dual Gas Valve-150,000 Btu Includes Lp Kit & Side Outlets 7200er Replaces 720-401 RBS720-406 24v 3/4" X 3/4" Standing Pilot Gas Valve Includes Lp Kit & Bushings 150,000 Btu 7200er Replaces 7a8-a1b-007
Qty:
Part #:284-VR8245M2530
- HONVR8245M2530 24Vac Dual Intermittent Pilot, Direct Spark, Or Hot Surface Ignition Gas Valve With 1/2" x 1/2" Inlet/Outlet, Standard Opening and 3.5" WC Pressure Regulator Setting, Includes LP Kit
Part Description
Gas Valve
Type Universal Electronic/Direct/Intermittent Pilot Operated, 1-Stage, Straight-Through
Port Connection 1/2 Inch Compression x 1/2 Inch Compression
Input Supply Rating 24 Volt AC at 50/60 Hertz
Temperature Rating -40 to 175 Deg F
Pressure Rating 1/2 PSI
Mounting Details 0 to 90 Degree in any Direction from Upright Position of Gas Control Knob, Including Vertically
Media Handled Gas
Inclusions/Features (1) 1/2 Inch x 3/8 Inch Reducer Bushing, Natural to Liquid Propane Conversion Kit, Standard Opening, Manual Valve, (2) Automatic Operator, Pressure Regulator, Pilot Adjustment, Pilot Plug and Ignition Adapter, Low Voltage
Application Residential Gas Fired Appliance
Applicable Standard UL, CSA
Overall Dimension 4-1/16 Inch Width x 2-11/16 Inch Depth x 5-3/8 Inch Height
Pressure Regulator Setting 3.5 Inch WC
Pressure Tapping Size 1/8 Inch Threaded with Plug
Flow Capacity 20 to 200 CFH
Electrical Connection 1/4 Inch Quick Connect Male Terminal
Qty:
Qty:
Part #:31-0832136
Qty:
Part #:31-0887122
Qty:
Part #:31-0887135
-
This check repair kit provides all the parts necessary to repair the first check on a 1 1/4 to 2 inch lead free reduced pressure zone assembly, model 909M1. This kit consists of all parts necessary to repair the applicable reduced pressure zone assembly. All parts are genuine and original to the valve.
Features
Parts are specific to valve size
All parts are made of high quality materials
Factory replacement parts
No special tools required for servicing
Qty:
Part #:31-0887136
-
This check repair kit provides all the parts necessary to repair the second check on a 3/4 to 1 inch lead free reduced pressure zone assembly, model 909M1. This kit consists of all parts necessary to repair the applicable reduced pressure zone assembly. All parts are genuine and original to the valve.
Features
Factory replacement parts
All parts are made of high quality materials
Parts are specific to valve size
No special tools required for servicing
Qty:
Part #:31-0794059
Qty:
Part #:31-0794060
-
This total relief valve repair kit provides all the parts necessary to repair the relief valve on a 1 1/4 to 2 inch lead free reduced pressure zone valve assembly. This kit consists of the relief valve assembly, seat, seat O-ring, 2 piston O-rings, and lubricant. All parts are genuine and original to the valve.
Features
Original parts insure long service life
All parts are made of high quality materials
Serviceable in the field
No special tools required
Qty:
Part #:31-0122772
-
Series LF909 Small reduced pressure valve assembly backflow preventer is designed to prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage or backpressure where there is a potential health hazard. An exclusive relief valve design provides substantially improved relief valve discharge performance during emergency conditions of combined backsiphonage and backpressure. These small diameter backflow preventers are available in 3/4 to 2 in sizes.
Series LF909 for small diameter assemblies has a compact modular design that facilitates easy maintenance for in-line repairs. It can be installed horizontal or vertical without the need of any special tools.
Features
Lead free construction
Exclusive relief valve design provides maximum capacity during emergency conditions
No special tools required for servicing
Compact modular design facilitates easy maintenance for in-line repairs
Horizontal or vertical (up or down) installation on limited sizes only
Qty:
Part #:31-0123095
-
This 1 inch lead free wye pattern strainer is designed to protect system components from dirt, rust, and other damaging debris in the piping system. It has a solid retainer cap with gasket, threaded end connections, and a 20 mesh stainless steel screen.
Features
Wye pattern
Threaded end connections
Lead free construction
Solid retainer cap with gasket
Qty:
Part #:31-0123148
Qty:
Part #:284-L4064B2210
- HONL4064B2210 Fan & Limit W/11" Insertion
Fan and Limit Controller
Type 11-1/2 Inch Length Element Insertion, Surface/Universal Mounting Bracket
Temperature Range -40 to 190 Deg F
Maximum Temperature Rating 190 Deg F (Switch), 350 Deg F (Element), 100 to 250 Deg F (High Limit), 65 to 215 Deg F (Fan ON), 50 to 200 Deg F (Fan OFF), 200 Deg F (High Limit Stop), 125 Deg F (Fan ON Stop), 100 Deg F (Fan OFF Stop)
Contact Rating 14 Amp at 120 Volt AC/7 Amp at 240 Volt AC Fan (Full Load), 8 Amp at 120 Volt AC/4 Amp at 240 Volt AC Limit (Full Load), 84 Amp at 120 Volt AC/42 Amp at 240 Volt AC Fan (Locked Rotor), 48 Amp at 120 Volt AC/24 Amp at 240 Volt AC Limit (Locked Rotor), 0.25 Amp at 0.25 to 12 Volt AC/2 Amp at 24 Volt AC (Pilot Duty)
Contact Configuration Fan Switch Makes, High Limit Switch Breaks on Temperature Rise
Connection Type Auxiliary Screw Terminal
Application Forced Warm Air Heating System
Approval UL, CSA
Overall Dimension 3 Inch Width x 1-19/32 Inch Depth x 4-9/32 Inch Height
Differential Temperature Rating 25 Deg F (High Limit)
Includes Manual and Automatic Fan On/Off Setting, Breakaway Jumper
Qty:
Displaying: 1 - 22 of 22 Matching Items