Maxitrol
HVAC and Plumbing
View:
Active Filters :
- Main Category: HVAC and Plumbing
- Brand: Maxitrol Parker Ridgid Watts Regulator
Part #:700506
-
This 3/4 inch steam radiator gate valve is used as a shutoff valve in steam or hydronic heating systems. It feature a bronze body with thread x male union connections.
Bronze body
Thread x male union connections
Rising stem
Solid wedge
Qty:
Part #:700505
- This 1/2 inch steam radiator gate valve is used as a shutoff valve in steam or hydronic heating systems. It feature a bronze body with thread x male union connections.
Bronze body
Thread x male union connections
Rising stem
Solid wedge
Qty:
Part #:700507
- This 3/4 inch steam radiator gate valve is used as a shutoff valve in steam or hydronic heating systems. It feature a bronze body with thread x male union connections.
Bronze body
Thread x male union connections
Rising stem
Solid wedge
Qty:
Part #:700511
- This 3/4 inch steam radiator gate valve is used as a shutoff valve in steam or hydronic heating systems. It feature a bronze body with thread x male union connections.
Bronze body
Thread x male union connections
Rising stem
Solid wedge
Qty:
Part #:284-325-7A-1-1/4IN
-
MAX325-7A-1 1/4" 1-1/4" Gas Pressure Regulator 1,250,000 BTU Use With R8110 Series Spring... Comes W/standard Spring Is 4-12",10 PSI Max Inlet Pressure,replaces 325-7-1-1/4" 1010 = 1-1/4"
Part Description
Gas Pressure Regulator
Actuation Type Lever
Nominal Size 1-1/4 Inch
End Connection Female Threaded x Female Threaded
End to End Distance 8 Inch
Body Material Aluminum
Temperature Rating 40 to 205 Deg F
Pressure Rating 2/5/10 PSI (Inlet), 65 PSI (Emergency Exposure Limit)
Application Residential, Commercial, Industrial
Applicable Standard CSA (Canada and US), CE, ANSI Z21.18/CSA 6.3
Gas Type Natural, Mixed Gas, Liquefied Petroleum Gas and LP Gas Air Mixture
Vent Pipe Connection 1/2 Inch Threaded
Swing Radius 6.1 Inch
Spring Size 4 to 12 Inch WC
Height 7.3 Inch
Individual Load Rating 1250000 BTU/Hour
Capacity 1250000 BTU/Hour
Qty:
Part #:284-MAX325-7A-1 1/2IN
- MAX325-7A-1 1/2" 1-1/2" Gas Pressure Regulator 1,250,000 Btu Use With R8110 Spring Comes With Standard 4-12" Spring Replaces 325-7-1 1/2" 10 Psi Max Inlet
Part Description
Gas Pressure Regulator
Actuation Type Lever
Nominal Size 1-1/2 Inch
End Connection Female Threaded x Female Threaded
End to End Distance 8 Inch
Body Material Aluminum
Temperature Rating 40 to 205 Deg F
Pressure Rating 2/5/10 PSI (Inlet), 65 PSI (Emergency Exposure Limit)
Application Residential, Commercial, Industrial
Applicable Standard CSA (Canada and US), CE, ANSI Z21.18/CSA 6.3
Gas Type Natural, Mixed Gas, Liquefied Petroleum Gas and LP Gas Air Mixture
Vent Pipe Connection 1/2 Inch Threaded
Swing Radius 6.1 Inch
Spring Size 4 to 12 Inch WC
Height 7.3 Inch
Individual Load Rating 1250000 BTU/Hour
Qty:
Part #:284-MAXR8110-1022
- MAXR8110-1022 Red Spring For RV81,210D,325-7 10-22"
Part Description
Gas Pressure Regulator Spring
MROSCS Leaf Class Name Valve Spring
Used On Item Gas Pressure Regulator
Used On Model/Brand RV81, 210D, 325-7A
Color Code Red
Overall Dimension 7/8 Inch Inner Diameter x 4-5/16 Inch Length
Outlet Pressure 10 to 22 Inch WC
$
39.35
Qty:
Part #:284-12A49
- MAX12A49 1/2" NPT. Automatic Vent Limiting Device For 325-7 & 325-9 Series, OPD210E
Part Description
Gas Pressure Regulator Vent Limiter
MROSCS Leaf Class Name Valve Limiter
Type Automatic
Material Brass
Used On Item Gas Pressure Regulator
Used On Model/Brand 325-7A, 325-7AL, 325-9, 325-9L, OPD210E
Applicable Standard CSA, ANSI
Nominal Size 1/2 Inch Threaded
Pressure Rating 2 PSI (Liquid Propane), 5 PSI (Natural)
$
175.00
Qty:
Part #:284-MAX13A25
- MAX13A25 Outdoor Vent Protector Kit For 325-7, 325-9, RV91 Series & 210E Series 1/2" Npt. (rain Cover)
Part Description
Gas Pressure Regulator Vent Protector
MROSCS Leaf Class Name Valve Protector
Used On Item 1/2 Inch Threaded Gas Pressure Regulator Vent
Used On Model/Brand 325-7A, 325-7AL, 325-9, 325-9L, RV91, 210E
Applicable Standard CSA (Canada and US)
Mounting Position Upright
Application Outdoor
$
93.95
Qty:
Part #:284-325-5-1IN
-
MAX325-5-1" 1" Gas Pressure Regulator For Up To 10 PSI Use With R325E10 Spring Includes 12A39 Vent Limiter & Standard 4-12" Spring 325,000 BTU Replaces 325-5A-1"
Part Description
Gas Pressure Regulator
Actuation Type Lever
Nominal Size 1 Inch
End Connection Female Threaded x Female Threaded
End to End Distance 5.9 Inch
Body Material Aluminum
Temperature Rating 40 to 205 Deg F
Pressure Rating 2/5/10 PSI (Inlet), 65 PSI (Emergency Exposure Limit)
Application Residential, Commercial, Industrial
Applicable Standard CSA (Canada and US), CE, ANSI Z21.18/CSA 6.3
Gas Type Natural, Mixed Gas, Liquefied Petroleum Gas and LP Gas Air Mixture
Vent Pipe Connection 3/8 Inch Threaded
Swing Radius 4.9 Inch
Spring Size 4 to 12 Inch WC
Height 5.3 Inch
Individual Load Rating 325000 BTU/Hour
Capacity 325000 BTU/Hour
Qty:
Part #:284-325-5-3/4IN
-
MAX325-5-3/4" 3/4" Gas Pressure Regulator For Up To 10 PSI Use R325E10 Spring Includes 12A39 Vent Limiter & Standard 4-12" Spring 325,000 BTU Replaces 325-5A-3/4"
Part Description
Gas Pressure Regulator
Actuation Type Lever
Nominal Size 3/4 Inch
End Connection Female Threaded x Female Threaded
End to End Distance 5.9 Inch
Body Material Aluminum
Temperature Rating 40 to 205 Deg F
Pressure Rating 2/5/10 PSI (Inlet), 65 PSI (Emergency Exposure Limit)
Application Residential, Commercial, Industrial
Applicable Standard CSA (Canada and US), CE, ANSI Z21.18/CSA 6.3
Gas Type Natural, Mixed Gas, Liquefied Petroleum Gas and LP Gas Air Mixture
Vent Pipe Connection 3/8 Inch Threaded
Swing Radius 4.9 Inch
Spring Size 4 to 12 Inch WC
Height 5.3 Inch
Individual Load Rating 325000 BTU/Hour
Capacity 325000 BTU/Hour
Qty:
Qty:
Part #:559118
- The LFMMVM1 Thermostatic Mixing Valves maintain and limit mixed hot water to a desired, selectable temperature. The LFMMVM1 valves can be set to any temperature between 80°F and 120°F with flow rates as low as 0.5 gpm and as high as 12 gpm (refer to capacity chart on back). This mixing valve series is listed under ASSE 1017 for valves used in hot water source applications, ASSE 1069 for single-pipe, tempered water applications and ASSE 1070 for valves used in individual or multiple fixture applications and also listed IAPMO cUPC. The LFMMVM1's feature Lead Free construction to comply with Lead Free installation requirements. The LFMMVM1 uses a double throttling design to control both the hot and cold water supply to the mixed outlet. The superior flow characteristics of this valve provide accurate temperature control (±3°F) with low pressure drop across the rated flow range. As an added feature, the LFMMVM1 series incorporates integral inlet filter washers and check valves in both the hot and cold water inlets to protect against cross flow.
Features
Lead Free cast copper silicon alloy body construction
Solid wax hydraulic principle thermostat assures dependable mixing of hot and cold water
Thermostat controls both hot and cold water
Available union connection models include threaded (-UT), solder (-US), PEX (-PEX), PEX F1960 cold expansion fittings (-CEF), CPVC (-CPVC), Quick-Connect (-QC), or w/press
Adjustment cap with locking feature
Integral filter washers and check valves
Qty:
Part #:284-RV48CL 3/4
- 3/4\" Gas Pressure Regulator 250,000 BTU Use With R4810 Spring 5\" Natural / 10\" LP Maximum 1/2 PSI Inlet Pressure Single Appliance Only
Part Description
Gas Pressure Regulator
Type Poppet
Nominal Size 3/4 Inch
End Connection Female Threaded x Female Threaded
End to End Distance 3.4 Inch
Body Material Aluminum
Seat Material Rubber
Temperature Rating 32 to 225 Deg F
Pressure Rating 1/2 PSI (Inlet), 2.5 PSI (Emergency Exposure Limit)
Inclusions/Features Integral Vent Limiting Orifice as the Breather Hole, Convertible Regulator
Application Burner and Pilot Load, Residential and Commercial Cooking Appliance, Barbecue, Hearth Product, Pilot Line
Applicable Standard CSA (Canada and US), CE, ANSI Z21.18/CSA 6.3
Gas Type Natural, Mixed Gas, Liquefied Petroleum Gas and LP Gas Air Mixture
Vent Type Integral/1/8 Inch Threaded, 12A04/12A06 Limiting Device
Swing Radius 2 Inch
Size 3 Inch Width x 2.8 Inch Height
Pressure Drop Rating 150000 BTU/Hour
Qty:
Part #:284-MAXR400S-1/2
- MAXR400S-1/2 1/2" Gas Pressure Regulator 300,000 BTU Use With R400B10 Spring Comes Standard W/ 3-6" Replaces RV42 1/2" Single Appliance Only
Part Description
Gas Pressure Regulator
Type Double Diaphragm Balanced Valve
Nominal Size 1/2 Inch
End Connection Female Threaded x Female Threaded
End to End Distance 2 Inch
Body Material Aluminum
Temperature Rating -40 to 250 Deg F
Pressure Rating 5 PSI (Inlet), 12.5 PSI (Emergency Exposure Limit)
Application Burner and Pilot Load, Infrared Heater and Pilot Line
Applicable Standard UL, CSA (Canada and US), CE, ANSI Z21.18
Gas Type Natural, Mixed Gas, Liquefied Petroleum Gas and LP Gas Air Mixture
Vent Pipe Connection 1/8 Inch Threaded
Swing Radius 2.4 Inch
Size 2 Inch Width x 3.3 Inch Height
Pressure Drop Rating 303 BTU/Hour
Qty:
Qty:
Part #:31-0832136
Qty:
Part #:31-0887122
Qty:
Part #:31-0887135
-
This check repair kit provides all the parts necessary to repair the first check on a 1 1/4 to 2 inch lead free reduced pressure zone assembly, model 909M1. This kit consists of all parts necessary to repair the applicable reduced pressure zone assembly. All parts are genuine and original to the valve.
Features
Parts are specific to valve size
All parts are made of high quality materials
Factory replacement parts
No special tools required for servicing
Qty:
Part #:31-0887136
-
This check repair kit provides all the parts necessary to repair the second check on a 3/4 to 1 inch lead free reduced pressure zone assembly, model 909M1. This kit consists of all parts necessary to repair the applicable reduced pressure zone assembly. All parts are genuine and original to the valve.
Features
Factory replacement parts
All parts are made of high quality materials
Parts are specific to valve size
No special tools required for servicing
Qty:
Part #:31-0794059
Qty:
Part #:31-0794060
-
This total relief valve repair kit provides all the parts necessary to repair the relief valve on a 1 1/4 to 2 inch lead free reduced pressure zone valve assembly. This kit consists of the relief valve assembly, seat, seat O-ring, 2 piston O-rings, and lubricant. All parts are genuine and original to the valve.
Features
Original parts insure long service life
All parts are made of high quality materials
Serviceable in the field
No special tools required
Qty:
Part #:31-0122772
-
Series LF909 Small reduced pressure valve assembly backflow preventer is designed to prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage or backpressure where there is a potential health hazard. An exclusive relief valve design provides substantially improved relief valve discharge performance during emergency conditions of combined backsiphonage and backpressure. These small diameter backflow preventers are available in 3/4 to 2 in sizes.
Series LF909 for small diameter assemblies has a compact modular design that facilitates easy maintenance for in-line repairs. It can be installed horizontal or vertical without the need of any special tools.
Features
Lead free construction
Exclusive relief valve design provides maximum capacity during emergency conditions
No special tools required for servicing
Compact modular design facilitates easy maintenance for in-line repairs
Horizontal or vertical (up or down) installation on limited sizes only
Qty:
Part #:31-0123095
-
This 1 inch lead free wye pattern strainer is designed to protect system components from dirt, rust, and other damaging debris in the piping system. It has a solid retainer cap with gasket, threaded end connections, and a 20 mesh stainless steel screen.
Features
Wye pattern
Threaded end connections
Lead free construction
Solid retainer cap with gasket
Qty:
Displaying: 1 - 24 of 28 Matching Items