Brasscraft
HVAC and Plumbing


Displaying: 1 - 24 of 32 Matching Items
32 Items
View:
Active Filters :
Part #:700506

This 3/4 inch steam radiator gate valve is used as a shutoff valve in steam or hydronic heating systems. It feature a bronze body with thread x male union connections. Bronze body Thread x male union connections Rising stem Solid wedge
$234.50 MSRP $ 136.66
closeout
Part #:100151

Availability: Will be backordered (Typically arrives in 14 days)
CSSC 1/2&rdquo ID (5/8&rdquo OD) Coated Gas Appliance Connectors Use For use with indoor and outdoor connections of gas appliances to gas piping system.May be used with natural, manufactured, mixed and liquefied petroleum (LP orpropane) gases and LP gas-air mixtures.Design Features Superior corrosion resistance to harsh chemicals found in most commonhousehold cleaning, plumbing repair, and masonry products when compared withuncoated gas connectors UV rays and salt resistant, ProCoat&reg connectors are certified for indoor andoutdoor use Strong and flexible with greater depth and number of corrugations to withstandgreater torque &amp bend cycles Meets industry standards for torsion without compromising the integrity ofthe coating or connector Meets industry standard for repeated bending without compromising theintegrity of the coating or connector One-piece construction has no soldered of brazed joints Smoother, burnished flare on connector ends seal with less torque Uniform coat over entire length of connector for complete corrosionresistance of the stainless steel core 100% leak testedOperating SpecificationsTemperature -40&deg to 150&deg FPressure standard line pressures up to 1/2 PSI maximum
$ 24.50
Part #:700505

This 1/2 inch steam radiator gate valve is used as a shutoff valve in steam or hydronic heating systems. It feature a bronze body with thread x male union connections. Bronze body Thread x male union connections Rising stem Solid wedge
$194.00 MSRP $ 121.11
Part #:700507

This 3/4 inch steam radiator gate valve is used as a shutoff valve in steam or hydronic heating systems. It feature a bronze body with thread x male union connections. Bronze body Thread x male union connections Rising stem Solid wedge
$254.00 MSRP $ 174.20
Part #:700511

This 3/4 inch steam radiator gate valve is used as a shutoff valve in steam or hydronic heating systems. It feature a bronze body with thread x male union connections. Bronze body Thread x male union connections Rising stem Solid wedge
$442.50 MSRP $ 296.34
closeout
Part #:107514

CLOSEOUTS Only 5 Left!
Mcdonald 5421-234 72082S
$14.85 MSRP $ 8.89
closeout
Part #:100016

CLOSEOUTS Only 65 Left!
$ 4.30
closeout
Part #:100020

CLOSEOUTS Only 41 Left!
$ 4.30
closeout
Part #:100731

CLOSEOUTS Only 4 Left!
$ 4.30
closeout
Part #:107491

CLOSEOUTS Only 147 Left!
$ 2.05
closeout
Part #:107495

CLOSEOUTS Only 6 Left!
$ 2.55
closeout
Part #:107496

CLOSEOUTS Only 141 Left!
$ 2.55
closeout
Part #:107502

CLOSEOUTS Only 5 Left!
$ 2.55
closeout
Part #:107503

CLOSEOUTS Only 2 Left!
$ 4.30
closeout
Part #:107504

CLOSEOUTS Only 21 Left!
$ 3.96
closeout
Part #:107505

CLOSEOUTS Only 50 Left!
$ 3.96
closeout
Part #:107521

CLOSEOUTS Only 7 Left!
$ 2.38
closeout
Part #:107522

CLOSEOUTS Only 6 Left!
$ 3.51
closeout
Part #:107524

CLOSEOUTS Only 15 Left!
$ 5.75
closeout
Part #:107525

CLOSEOUTS Only 32 Left!
$ 2.53
closeout
Part #:107526

CLOSEOUTS Only 97 Left!
$ 4.21
Part #:559118

The LFMMVM1 Thermostatic Mixing Valves maintain and limit mixed hot water to a desired, selectable temperature. The LFMMVM1 valves can be set to any temperature between 80&degF and 120&degF with flow rates as low as 0.5 gpm and as high as 12 gpm (refer to capacity chart on back). This mixing valve series is listed under ASSE 1017 for valves used in hot water source applications, ASSE 1069 for single-pipe, tempered water applications and ASSE 1070 for valves used in individual or multiple fixture applications and also listed IAPMO cUPC. The LFMMVM1's feature Lead Free construction to comply with Lead Free installation requirements. The LFMMVM1 uses a double throttling design to control both the hot and cold water supply to the mixed outlet. The superior flow characteristics of this valve provide accurate temperature control (&plusmn3&degF) with low pressure drop across the rated flow range. As an added feature, the LFMMVM1 series incorporates integral inlet filter washers and check valves in both the hot and cold water inlets to protect against cross flow. Features Lead Free cast copper silicon alloy body construction Solid wax hydraulic principle thermostat assures dependable mixing of hot and cold water Thermostat controls both hot and cold water Available union connection models include threaded (-UT), solder (-US), PEX (-PEX), PEX F1960 cold expansion fittings (-CEF), CPVC (-CPVC), Quick-Connect (-QC), or w/press Adjustment cap with locking feature Integral filter washers and check valves
$595.50 MSRP $ 106.88
 
Displaying: 1 - 24 of 32 Matching Items