Marley Electric Heating
HVAC and Plumbing
View:
Active Filters :
- Main Category: HVAC and Plumbing
- Brand: Marley Electric Heating Watts Regulator
closeout
$
156.06
Qty:
Part #:305897
- IDEAL SPACES Bedrooms Living/Family Rooms Basements Campers Offices Workshops Garages Warehouses Receptionist Areas
COLOR White
Whether you need extra warmth in your family room, basement or home office, this portable utility heater will suit your needs. Just plug it in and you are ready to go. The built-in thermostat allows you to set just the right temperature for quick comfort in any interior space.
Two heat settings for a full range of comfort
Automatic thermostat
Fan-only feature to circulate air during non-heating periods
Tip-over safety switch and thermal limit
Built-in carrying handle and guards
120V grounded cord and plug
$
119.26
Qty:
closeout
$
266.76
Qty:
Part #:700506
-
This 3/4 inch steam radiator gate valve is used as a shutoff valve in steam or hydronic heating systems. It feature a bronze body with thread x male union connections.
Bronze body
Thread x male union connections
Rising stem
Solid wedge
Qty:
Part #:700505
- This 1/2 inch steam radiator gate valve is used as a shutoff valve in steam or hydronic heating systems. It feature a bronze body with thread x male union connections.
Bronze body
Thread x male union connections
Rising stem
Solid wedge
Qty:
Part #:700507
- This 3/4 inch steam radiator gate valve is used as a shutoff valve in steam or hydronic heating systems. It feature a bronze body with thread x male union connections.
Bronze body
Thread x male union connections
Rising stem
Solid wedge
Qty:
Part #:700511
- This 3/4 inch steam radiator gate valve is used as a shutoff valve in steam or hydronic heating systems. It feature a bronze body with thread x male union connections.
Bronze body
Thread x male union connections
Rising stem
Solid wedge
Qty:
closeout
$
74.52
Qty:
Part #:559118
- The LFMMVM1 Thermostatic Mixing Valves maintain and limit mixed hot water to a desired, selectable temperature. The LFMMVM1 valves can be set to any temperature between 80°F and 120°F with flow rates as low as 0.5 gpm and as high as 12 gpm (refer to capacity chart on back). This mixing valve series is listed under ASSE 1017 for valves used in hot water source applications, ASSE 1069 for single-pipe, tempered water applications and ASSE 1070 for valves used in individual or multiple fixture applications and also listed IAPMO cUPC. The LFMMVM1's feature Lead Free construction to comply with Lead Free installation requirements. The LFMMVM1 uses a double throttling design to control both the hot and cold water supply to the mixed outlet. The superior flow characteristics of this valve provide accurate temperature control (±3°F) with low pressure drop across the rated flow range. As an added feature, the LFMMVM1 series incorporates integral inlet filter washers and check valves in both the hot and cold water inlets to protect against cross flow.
Features
Lead Free cast copper silicon alloy body construction
Solid wax hydraulic principle thermostat assures dependable mixing of hot and cold water
Thermostat controls both hot and cold water
Available union connection models include threaded (-UT), solder (-US), PEX (-PEX), PEX F1960 cold expansion fittings (-CEF), CPVC (-CPVC), Quick-Connect (-QC), or w/press
Adjustment cap with locking feature
Integral filter washers and check valves
Qty:
Qty:
Part #:31-0832136
Qty:
Part #:31-0887122
Qty:
Part #:31-0887135
-
This check repair kit provides all the parts necessary to repair the first check on a 1 1/4 to 2 inch lead free reduced pressure zone assembly, model 909M1. This kit consists of all parts necessary to repair the applicable reduced pressure zone assembly. All parts are genuine and original to the valve.
Features
Parts are specific to valve size
All parts are made of high quality materials
Factory replacement parts
No special tools required for servicing
Qty:
Part #:31-0887136
-
This check repair kit provides all the parts necessary to repair the second check on a 3/4 to 1 inch lead free reduced pressure zone assembly, model 909M1. This kit consists of all parts necessary to repair the applicable reduced pressure zone assembly. All parts are genuine and original to the valve.
Features
Factory replacement parts
All parts are made of high quality materials
Parts are specific to valve size
No special tools required for servicing
Qty:
Part #:31-0794059
Qty:
Part #:31-0794060
-
This total relief valve repair kit provides all the parts necessary to repair the relief valve on a 1 1/4 to 2 inch lead free reduced pressure zone valve assembly. This kit consists of the relief valve assembly, seat, seat O-ring, 2 piston O-rings, and lubricant. All parts are genuine and original to the valve.
Features
Original parts insure long service life
All parts are made of high quality materials
Serviceable in the field
No special tools required
Qty:
Part #:31-0122772
-
Series LF909 Small reduced pressure valve assembly backflow preventer is designed to prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage or backpressure where there is a potential health hazard. An exclusive relief valve design provides substantially improved relief valve discharge performance during emergency conditions of combined backsiphonage and backpressure. These small diameter backflow preventers are available in 3/4 to 2 in sizes.
Series LF909 for small diameter assemblies has a compact modular design that facilitates easy maintenance for in-line repairs. It can be installed horizontal or vertical without the need of any special tools.
Features
Lead free construction
Exclusive relief valve design provides maximum capacity during emergency conditions
No special tools required for servicing
Compact modular design facilitates easy maintenance for in-line repairs
Horizontal or vertical (up or down) installation on limited sizes only
Qty:
Displaying: 1 - 24 of 26 Matching Items