1-1/4in
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Length: 1-1/4in 4-3/4in 9in 9.50in
Part #:507377
- Description
CHANNELLOCK® Straight Jaw Tongue & Groove Pliers are built to last with a PERMALOCK® fastener to eliminate nut and bolt failure, patented reinforcing edge to minimize stress breakage and laser-hardened teeth to provide a better, longer lasting grip. CHANNELLOCK® Straight Jaw Tongue & Groove Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.
The ORIGINAL STRAIGHT JAW Tongue & Groove Pliers provide a strong, versatile grip for use in both directions
RELIABLE PERMALOCK® fastener eliminates nut and bolt failure with increased joint strength
STRONG 90-degree, laser-hardened teeth for superior grip and longevity
FORGED high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention
UNDERCUT tongue & groove won&rsquot slip
CHANNELLOCK BLUE® grips for comfort
100% MADE IN USA
Qty:
Part #:508640
- Description
CHANNELLOCK® 422 9.5" Tongue & Groove Pliers have a unique v-jaw design that creates more points of contact on round stock and tubing. These pliers are built to last with a PERMALOCK® fastener to eliminate nut and bolt failure, patented reinforcing edge to minimize stress breakage and laser-hardened teeth to provide a better, longer lasting grip. CHANNELLOCK® V-Jaw Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.
V-JAWS for more points of contact on round stock and tubing
RELIABLE PERMALOCK® fastener eliminates nut and bolt failure with increased joint strength
STRONG 90-degree, laser-hardened teeth for superior grip and longevity
FORGED high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention
UNDERCUT tongue & groove won&rsquot slip
CHANNELLOCK BLUE® grips for comfort
100% MADE IN USA
Qty:
Qty:
Part #:507216
- (10)Tb 9In Prof Torpedo Lvl
High contrast e-BAND&trade vials highlight the edge of the bubble
High contrast vial surrounds improve vial visibility
3 vials - plumb, level and 45°
V-Groove working edge for accurate alignment on pipe or conduit
Aluminum frame with top read window
Strong magnetic edge
Made in the USA
Limited lifetime warranty
Qty:
Part #:503703
- 5/8" Shank Diameter Eyebolts Shoulder Pattern
Forged from the best quality carbon steel, hardened and tempered to ensure increased strength and toughness and reduce liability or breakage
Each lot is tested and inspected to insure conformance to specifications
Available with UNC Class 2A thread only
Eyebolt shanks should never be undercut or eyebolt shank diameters reduced
Shoulder eye bolts must be properly seated (should bear firmly against the mating part) otherwise the working loads must be reduced substantially. A steel washer or spacer may be required for proper seating
To obtain greatest strength from an eye bolt, it must fit reasonably tight in the hole into which it is screwed to prevent unscrewing due to twist of cable. Tightness and seating must be checked after initial load
Qty:
Part #:459-15389
- Hex End T-Handles - ProGuard&trade Finish
Solid steel handles
Welded handle/blade connection
Ergonomic handle design
Flywheel effect saves time
Smooth, non-porous handle coating
Handle coating extends along blade
Qty:
Part #:459-15390
- Hex End T-Handles - ProGuard&trade Finish
Solid steel handles
Welded handle/blade connection
Ergonomic handle design
Flywheel effect saves time
Smooth, non-porous handle coating
Handle coating extends along blade
Qty:
Part #:810266
- 4 3/4" Pin Punches
For driving out and removing already loosened pins and keys after initial movement by a solid or starter punch
Qty:
Part #:504035
- 1/2" Drive Impact Adapter 1/2" Female X 3/4" Male
Specially heat treated for impact use to provide long life, safety, and durability
Spring plunger provides secure socket retention for safety and convenience
Suitable for use with pneumatic and electric impact wrenches
Qty:
Qty:
closeout
Part #:511960
- CLOSEOUTS Only 1 Left!
-
3/4" x 6" Jaw & Jaw Turnbuckle, Forged Carbon Steel, Galvanized(Discontinued being replaced by TB108-J-J-HDG)
Drop-Forged Carbon Steel
Galvanized to Meet ASTM A-153 Specifications
5 to 1 Design Factor
Meets Design Requirements of ASTM F1145, Type 1, Grade 1, Class G
Jaws on Sizes 1/4&rdquo Through 5/8&rdquo Have Hex Head Bolt and Nut
Jaws on Sizes 3/4&rdquo Through 1-1/2&rdquo Have Cotter Key and Bolt
IMPORTANT Instructions For Use
Turnbuckles are Designed for a Static Load
In Loads Where There is Vibration, Lock Nuts (Jam Nuts) Should be Used to Prevent the Connection from Turning or Loosening
DO NOT EXCEED THE WORKING LOAD LIMIT
$
110.24
Qty:
closeout
Part #:511961
- CLOSEOUTS Only 5 Left!
-
3/4" x 9" Jaw & Jaw Turnbuckle, Forged Carbon Steel, Galvanized(Discontinued being replaced by TB108-9-J-J)
Drop-Forged Carbon Steel
Galvanized to Meet ASTM A-153 Specifications
5 to 1 Design Factor
Meets Design Requirements of ASTM F1145, Type 1, Grade 1, Class G
Jaws on Sizes 1/4&rdquo Through 5/8&rdquo Have Hex Head Bolt and Nut
Jaws on Sizes 3/4&rdquo Through 1-1/2&rdquo Have Cotter Key and Bolt
IMPORTANT Instructions For Use
Turnbuckles are Designed for a Static Load
In Loads Where There is Vibration, Lock Nuts (Jam Nuts) Should be Used to Prevent the Connection from Turning or Loosening
DO NOT EXCEED THE WORKING LOAD LIMIT
$
96.04
Qty:
Part #:506824
- Description
CHANNELLOCK® 410 9.5" Tongue & Groove Pliers have a special parrot nose and double tongue & groove design that gives this NUTBUSTER® added strength, ideal for round surfaces. These pliers are built to last with a PERMALOCK® fastener to eliminate nut and bolt failure, patented reinforcing edge to minimize stress breakage and laser-hardened teeth to provide a better, longer lasting grip. These pliers include an added SAFE-T-STOP® feature to prevent finger pinch with the combination of a lower jaw design and an expanded reinforcing rib preventing unwanted handle contact. CHANNELLOCK® NUTBUSTER® Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.
PARROT JAWS are self-gripping and ideal for use on round surfaces
RELIABLE PERMALOCK® fastener eliminates nut and bolt failure with increased joint strength
STRONG laser-hardened teeth for superior grip and longevity
FORGED high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention
UNDERCUT double tongue and groove won&rsquot slip
Patented SAFE-T-STOP® feature prevents finger pinch
CHANNELLOCK BLUE® grips for comfort
100% MADE IN USA
Qty:
Part #:803886
- Description
The CHANNELLOCK® 909 9.5" Crimper/Cutter offers a sleek nose design that easily maneuvers into tight places to make the perfect crimp on both insulated and non-insulated solderless connections and terminals. Precise laser heat-treated cutting edges and durable high carbon steel make this the only crimper you'll ever need. CHANNELLOCK® 909 Crimper/Cutters are made in USA and forged from high carbon steel that is specially coated for ultimate rust prevention.
CENTER CUT design aligns cutting edges in the center of the plier head providing additional leverage and overall performance
CRIMPER for use on insulated and non-insulated connections and terminals using 10-22 AWG wire
LASER heat-treated cutting edges perform better and last longer
PRECISION machined knife and anvil style cutting edges ensure perfect mating for superior performance and longevity
FORGED high carbon steel for maximum strength and durability is specially coated for ultimate rust prevention.
CHANNELLOCK BLUE® grips for comfort
100% MADE IN USA
Qty:
Qty:
Qty:
Qty:
Part #:506842
-
Overview
&bull Includes 5 bits 2 slotted, #1 Phillips®, #2 Phillips®, and T-15 Torx®
&bull Ergonomically designed handle for greater user comfort and control
&bull Hi-impact plastic handle for durability and flexibility in all types of work applications
&bull Heavy-duty 3-way On-Off-Locked ratcheting mechanism allows consistent and smooth operation
&bull Powerful magnetic shank securely holds bit in place before, during and after the job application
&bull Stainless steel shank eliminates problems of chrome chipping or rust
&bull Easy bit storage in handle
&bull Accepts all standard 1/4" hex shank bits
Qty:
Part #:812882
- 13/16" Drive 12-Point SAE 11/32" Shallow Socket
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for quick engagement on both 6 and 12 point fasteners
Qty:
Qty:
Qty:
Part #:810307
- 9" Long Taper Punches
Designed for aligning the holes in metal pieces through which rivets, bolts, or screws will be inserted
Not intended for driving pins as punch may become stuck in work
Also called line-up aligning or drift punches
Qty:
Part #:507913
- 3/8" Drive 6-Point SAE 13/16" Shallow Socket
&bull SUPERTORQUE® lobular openings for greater turning power without deforming the fastener
&bull Designed for maximum engagement on 6 point fasteners
Qty:
Part #:228-GL10
- Description
CHANNELLOCK® GL10 9.5" GRIPLOCK® Pliers have an ergonomically designed offset head that provides even more leverage. A special jaw design allows it to grip down on many shapes for added versatility. These pliers are built to last with a PERMALOCK® fastener to eliminate nut and bolt failure and laser-hardened teeth to provide a better, longer lasting grip. GRIPLOCK® Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.
SPECIAL GRIPLOCK® JAW design and ergonomic offset head accommodates many shapes with greater leverage
Patented SAFE-T-STOP® feature prevents finger pinch
RELIABLE PERMALOCK® fastener eliminates nut and bolt failure with increased joint strength
STRONG laser-hardened teeth for superior grip and longevity
FORGED high carbon U.S. steel for maximum strength and durability is specially coated for ultimate rust prevention
CHANNELLOCK BLUE® grips for comfort
100% MADE IN USA
Qty:
Displaying: 1 - 24 of 27 Matching Items