1/2 in
Hand and Power Tools
View:
Active Filters :
- Main Category: Hand and Power Tools
- Size: 1/2 in #3/0 4-1/2in 19MM
Part #:505942
-
1/2" Grade 30 Proof Coil Chain, Zinc Plated, 40' per Round Pail
Excellent Low Carbon Steel Chain for General Purpose Applications
Frequently Used for Fabricating Tow Chains, Binding and Logging Chains, Marine and Other General Applications
Standard Finish Zinc Plated or Galvanized
Hallmarking "C3" and "USA" on 5/16" and Larger
Proof Tested
Design Factor 4 to 1
Packaged in Pails, Order Unit is "Each"
Made in the USA
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
closeout
$30.03 MSRP
$
17.63
Part #:511866
- CLOSEOUTS Only 6 Left!
-
1/2" Clevis Grab Hook, Forged Steel, Self Colored
Material is Drop-Forged Carbon Steel (Grade 30 & 43) or Heat-Treated Alloy Steel
Grade 30 & 43 Hooks Available Self-Colored or Zinc-Plated
Alloy Hooks Are Painted Orange and Stamped &rdquoAlloy&rdquo 3.5 to 1 Design Factor
Alloy Hook Sizes 1/4" to 3/8" are Supplied Individually Bagged and Unassembled
Self-Colored Finish Hooks Are Bulk Packed, Zinc Plated Hooks Are Packed 10 Per Box
Grab Hooks Are Designed to Grab a Chain Link and Hold it in Place
Hooks are Sized by the Material Diameter of the Chain That They Engage. Make Sure the Hook Size and Chain Diameter are Compatible Before Attaching to Load
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:511895
-
1/2" Anchor Shackle, Screw Pin, Forged Carbon Steel, Painted Blue
Shackle Bodies Are Drop-Forged Carbon Steel
Self Colored (Painted Blue)
C-419-S Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 2
Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently Marked on Each Shackle
Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue
419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 &rdquoRigging Hardware&rdquo. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). the Shackles Can Be Proof Tested in Accordance with Section 26-1.4
Certification Available Upon Request
6 to 1 Design Factor
Pins and Bolts Are Heat-Treated and Made of Alloy Steel
Qty:
closeout
$203.00 MSRP
$
144.21
Part #:507361
- Availability: Will be backordered (Typically arrives in 10 days)
- 7.5 Amp 4-1/2" Small Angle Grinder (Discontinued, Being Replaced by 6141-30)
The 6140-30 4-1/2" 7.5 Amp Small Angle Grinder delivers performance, durability and ease-of-use features for industrial users. The X-large paddle switch with lock-on provides increased comfort and ease-of use when operating the grinder in various positions. Milwaukee's built in advanced airflow system, including Debris Baffles and Multi-Port Exhaust, extends tool life. 25% longer lasting epoxy motor protection extends tool life by protecting the copper wires from abrasion. The tool-free burst resistant guard allows the user to quickly adjust the guard without the use of a tool.
Qty:
Part #:288220
- M18 FUEL&trade 4-1/2" / 5" Braking Grinder (Tool Only)
The world's first cordless braking grinder stops accessories in under 2 seconds, delivers the power of a corded grinder, and has up to 10X longer tool life. The M18 FUEL&trade 4-1/2" / 5" Grinder supplies maximum sustained power to complete the toughest grinding, surface preparation and cutting applications. The POWERSTATE&trade Brushless Motor provides up to 10X longer motor life and lower cost of ownership. The M18&trade REDLITHIUM&trade XC5.0 Battery Pack delivers up to 4X more run time and 20% more power. The grinder features REDLINK PLUS&trade Intelligence, the most advanced system of cordless power tool electronics, for maximum performance. A Rapid Stop Brake feature stops accessories in under 2 seconds. The 18-volt lithium-ion grinder&rsquos thin body design gives it optimized balance to rest easily in your hands. Tool-free accessory changes using the FIXTEC nut and guard adjustments mean less downtime during work. The grinder is built with the same tool body, gearing system and anti-vibration side handle as Milwaukee&rsquos legendary high-performance corded grinders for maximum durability on the job. The kit includes 2 M18&trade REDLITHIUM&trade XC5.0 Extended Capacity Battery Packs, a multi-voltage charger and carrying case. Grinding wheel sold separately.
Qty:
Part #:729-2882-22
- M18 FUEL&trade 4-1/2" / 5" Braking Grinder w/ ONE-KEY&trade Paddle Switch, No Lock
Our M18 FUEL&trade 4-1/2" / 5" Braking Grinder with ONE-KEY&trade Paddle Switch, No Lock Kit is the next advancement in power and performance of cordless grinders while enhancing safety with its RAPIDSTOP&trade Brake. The M18 FUEL&trade 4-1/2" / 5" Braking Grinder with ONE-KEY&trade generates 11A corded power to complete the toughest grinding and cutting applications. The POWERSTATE&trade Brushless Motor delivers maximum sustained power and 8,500 RPM to remove material faster and increase productivity. REDLINK PLUS&trade Intelligence ensures unmatched levels of performance, protection, and compatibility. The RAPIDSTOP&trade Brake provides stop times under 2 seconds with an abrasive disc. Our M18 FUEL&trade 4-1/2" / 5" Braking Grinder with ONE-KEY&trade includes an electronic clutch for kickback protection, as well as overload protection to maximize motor life. Compatible with ONE-KEY&trade, this grinder wirelessly connects to a smartphone to track and manage the tool, providing you with visibility to where tools are across your network of jobs. The included M18&trade REDLITHIUM&trade HIGH OUTPUT&trade XC6.0 Batteries deliver 50% more power while running 50% cooler than the M18&trade REDLITHIUM&trade XC Batteries. Experience faster accessory changes, and less downtime with tool-free accessory and guard adjustments, while remaining fully compatible with the most common accessories in the market. The MILWAUKEE® M18 FUEL&trade 4-1/2" / 5" Braking Grinder with ONE-KEY&trade is the next level of jobsite productivity and enhanced safety in cordless grinders.
Qty:
Part #:511846
-
1/2" Wire Rope Clip, Forged Carbon Steel, Galvanized
Base is Drop-Forged Carbon Steel
Hot Galvanized to ASTM A-153 to Resist Rust and Corrosion
U-Bolts Are colored Blue for Identification Purposes and Use Heavy Duty Hex Nuts (UNC-2A)
Designed to Meet Federal Specifications, FF-C-450, Type 1, Class 1
Designed to Meet or Exceed All Requirements of ASME B30.26 Including Identification, Ductility, Design Factor and Temperature
Permanently Marked with Size and Manufacturer
Sizes 1/4" and Above Marked with USA and Date Code
Sizes 1/8" Through 1-1/4" Are Supplied Bagged and Unassembled
Note See Application and Warning Information
Qty:
Qty:
Part #:806812
-
1/2" Quick Link, Steel, Zinc Plated, #7350
For Fast and Easy Connections Between Two Lengths of Chain
DO NOT EXCEED THE WORKING LOAD LIMIT
Do Not Use for Overhead Lifting or Hoisting
Do Not Use to Support Human Weight, for Playground or Athletic Equipment, or as a Safety Device
Qty:
Part #:502823
-
3/0 Double Loop (Inco) Chain, Zinc Plated, 150' per Reel
Farm and Animal Chains, and Many General-Purpose Applications
Standard Material Low Carbon Steel
Standard Finish Zinc Plated, Polycoated in White, Yellow, Green or Red Colors
Design Factor 4 to 1
Packaged on Reels, Order Unit is "Each"
Made in the USA
Note Avoid Twisting in Suspension Applications
Campbell Recommends The Use of Proof Coil or Straight Link Coil Chain for Swing Set Applications
Do Not Use for Overhead Lifting
DO NOT EXCEED THE WORKING LOAD LIMIT
Part #:511874
-
1/2" Connecting Link, Forged Carbon Steel, Self Colored, 10 Pcs per Box
Drop-Forged Heat-Treated Carbon or Alloy Steel
Standard Finish is Self-Colored or Galvanized to Meet ASTM A-153 Specifications
4 to 1 Design Factor
For Proper Closure, Peen the Prongs to Fill the Hole of the Mating Half as Much as Possible
Meets Design Requirements of Federal Specification RR-C-271D, Type II
Make Sure the Connecting Link Used is the Same Size as the Components Being Joined. e.g., a 3/8 in. Connecting Link is Used with 3/8 in. Chain
Any Assembly Made Using Connecting Links Should be Rated at the Working Load Limit of the Weakest Component.
The Working Load Limit of Connecting Links is Based on a Straight Line Pull. Any Side or Shock Loading Will Significantly Reduce the Actual Working Load Limit.
NEVER Re-Use a Connecting Link
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:511931
-
1/2" Eye Slip Hook, Grade 43, Zinc Plated
Forged Steel
Grade 43
UPC Tagged
Slip Hooks Are Designed to Allow Chain to Slip Through the Hook
DO NOT EXCEED THE WORKING LOAD LIMIT
Qty:
Part #:511943
-
1/2" Heavy Wire Rope Thimble, Galvanized
Standard Material Hot Rolled, Mild Steel
Galvanized
Imported
A Thimble is a Wear Pad That Protects the Rope From Cuts, Kinking and Abrasions. Always Use An Appropriate Thimble When Making An Eye in a Rope.
When it is Necessary to Open a Thimble to Insert a Fitting, Make Sure the Points are Properly Aligned When the Thimble is Closed. Inspect Carefully for Cracks.
Thimbles ARE NOT Designed for Load Carrying Purposes Therefore Working Load Limits Have Not Been Established.
Qty:
Part #:806906
-
1/2" Spring Snap Link, Steel, Zinc Plated, #2450
Ideal for Hanging Keys and Other Utility Items From Belt
Fast and Easy to Connect and Disconnect
DO NOT EXCEED THE WORKING LOAD LIMIT
Do Not Use for Overhead Lifting or Hoisting
Do Not Use to Support Human Weight, for Playground or Athletic Equipment, or as a Safety Device
Qty:
Part #:459-12188
- Bondhus® Hex L-Wrench KeysProduct DetailsChamfered tool tips eliminate burrs and help tools seat in screw headSharp corners transfer more torque to the screw and reduce strippingPrecision machined for ease of use and superior fit.
Qty:
Part #:1184-JHW1219MSC
- 19 mm 12-Point Metric SUPERCOMBO® Combination Wrench
&bull SUPERCOMBO® open end has specially designed grooves that direct wrench force away from fastener corners
&bull SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points
&bull SUPERTORQUE® box opening design allows application of higher torque without rounding or deforming hex fastener points. No contact is made at the corners. Instead, wrenching forces are placed on the flat surfaces behind the points
&bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy
&bull May be used on all common hex (6 point) fasteners with considerable advantage over conventional box end wrenches to increase both hand tool flexibility and economy
Qty:
Qty:
Qty:
Part #:288020
- AX Item Number 288020. Country of Origin VNM. Harmonized Tariff 8467290010:
Qty:
Part #:729-2680-22
- M18&trade Cordless LITHIUM-ION 4-1/2" Cut-off / Grinder Kit (Discontinued, Replaced by 2680-20)
The M18® Cordless LITHIUM-ION 4-1/2" Cut-off / Grinder provides speed, durability and ease-of-use to the industrial user. Built with a Milwaukee® 4-pole motor, the 2680-22 delivers maximum power when cutting or grinding. The 2680-22 is the only cordless cut-off / grinder in the market to provide the user-preferred paddle switch for comfort and ease-of use when operating in various positions. L-shape intake vents protect the cut-off / grinder by keeping harmful debris from entering the tool and damaging internal components.
Qty:
Part #:729-6142-31
- 11 Amp Corded 4-1/2 in. Small Angle Grinder Paddle No-lock
The 11 Amp 4-1/2 in. Small Angle Grinder (Paddle, No-Lock) delivers up to 3X more durability and up to 50% more power than the competition. With a 1,400 MWO motor that powers through the toughest jobs, the 6142-31 is the perfect match for industrial users. A grip circumference measuring a full 2 in. less than the competition, this Milwaukee grinder provides more control and less fatigue throughout the day. Milwaukee's Electronic Advantage includes Overload Protection to maximize motor life, an Electronic Clutch that extends tool life and helps prevent bind-up, Line Lock-Out that prevents automatic start-up after power lossand Soft Start. Featuring a 100% tool-free design, this Grinder allows the user to change all accessories, including hubbed product, without a wrench. In addition, the tool-free, burst resistant, adjustable guard allows users to make quick guard installations and adjustments.
Qty:
Part #:729-2980-20
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Metal Working. Product Level 3 TOL Grinders. Product Level 4 TOL SAGs. Product Level 5 TOL FUEL. AX Item Number 298020. Country of Origin VNM. Harmonized Tariff 8467290010.:
Qty:
Part #:729-2980-22
- M18 FUEL&trade 4-1/2&rdquo - 6&rdquo Braking Grinder Kit, Paddle Switch No-Lock
Our M18 FUEL&trade 4-1/2&rdquo - 6&rdquo Braking Grinder, Paddle Switch, No-Lock two battery kit is our highest performing small angle grinder. It generates the power of a 13A corded grinder, brakes all accessories under 3 seconds, and has 6&rdquo grinding capacity. The POWERSTATE&trade Brushless Motor provides you with 9,000 RPM and the power equivalent of a 13A corded grinder, delivering industry-leading performance. REDLINK PLUS&trade Intelligence ensures maximum performance and protects your angle grinder from overload, overheating and over discharge. The Rapid Stop Brake feature stops all accessories in under 3 seconds. Providing you with high performance, advanced ergonomics and legendary durability, the M18 FUEL&trade 4-1/2&rdquo - 6&rdquo Braking Grinder is designed to complete the toughest grinding, surface preparation and cutting applications with all 4-1/2&rdquo &ndash 6&rdquo accessories. The M18&trade REDLITHIUM&trade HIGH OUTPUT&trade XC6.0 Battery provides you with more material removed per charge and unmatched run-time in all applications. Tool-free accessory changes using the FIXTEC nut and tool-free guard adjustments mean you will experience less downtime as you work.The cordless angle grinder's grinding wheel is sold separately. The kit includes two M18&trade REDLITHIUM&trade HIGH OUTPUT&trade XC6.0 Batteries.
Close
Includes
(1)
M18 FUEL&trade 4-1/2&rdquo - 6&rdquo Braking Grinder Paddle Switch, No-Lock (2980-20)
(2)
M18 REDLITHIUM&trade HIGH OUTPUT&trade XC6.0 Battery Pack (48-11-1865)
(1)
M18&trade & M12&trade Rapid Charger (48-59-1808)
(1) FIXTEC Nut (1) T27 Guard (1) Back Flange (1) Wrench (1) Side Handle
Read More
Where to Buy
Share This
Qty:
Part #:288920
- Business Unit Tools. Product Level 1 Tools M18. Product Level 2 Tools Metal Working. Product Level 3 TOL Grinders. Product Level 4 TOL SAGs. Product Level 5 TOL FUEL. AX Item Number 288920. Country of Origin VNM. Harmonized Tariff 8467290010.:
Qty:
Displaying: 1 - 24 of 26 Matching Items